#ifndef IODEV_H
#define IODEV_H

/* Address for I/O device d, subregister r, offset o */
#define IODEVA(d,r,o)   (0xfffff800+((d) << 7)+((r) << 2)+(o))

#ifdef __ASSEMBLY__

/*
 * The I/O device range is designed so that it can be addressed via
 * negative offsets from the zero register, so no explicit base
 * pointer register is necesary.
 */
#define IODEVV(d,r) IODEVA(d,r,0)(zero)
#define IODEVB(d,r) IODEVV(d,r,0)
#define IODEVH(d,r) IODEVV(d,r,0)
#define IODEVL(d,r) IODEVV(d,r,0)

#else

#include <stdint.h>

/* Writable registers */
#define IODEVV(d,r)   (*(volatile void     *)IODEVA(d,r,0))
#define IODEVB(d,r)   (*(volatile uint8_t  *)IODEVA(d,r,0))
#define IODEVB0(d,r)  (*(volatile uint8_t  *)IODEVA(d,r,0))
#define IODEVB1(d,r)  (*(volatile uint8_t  *)IODEVA(d,r,1))
#define IODEVB2(d,r)  (*(volatile uint8_t  *)IODEVA(d,r,2))
#define IODEVB3(d,r)  (*(volatile uint8_t  *)IODEVA(d,r,3))
#define IODEVH(d,r)   (*(volatile uint16_t *)IODEVA(d,r,0))
#define IODEVH0(d,r)  (*(volatile uint16_t *)IODEVA(d,r,0))
#define IODEVH1(d,r)  (*(volatile uint16_t *)IODEVA(d,r,2))
#define IODEVL(d,r)   (*(volatile uint32_t *)IODEVA(d,r,0))

/* Readonly registers */
#define IODEVRV(d,r)  (*(const volatile void     *)IODEVA(d,r,0))
#define IODEVRB(d,r)  (*(const volatile uint8_t  *)IODEVA(d,r,0))
#define IODEVRB0(d,r) (*(const volatile uint8_t  *)IODEVA(d,r,0))
#define IODEVRB1(d,r) (*(const volatile uint8_t  *)IODEVA(d,r,1))
#define IODEVRB2(d,r) (*(const volatile uint8_t  *)IODEVA(d,r,2))
#define IODEVRB3(d,r) (*(const volatile uint8_t  *)IODEVA(d,r,3))
#define IODEVRH(d,r)  (*(const volatile uint16_t *)IODEVA(d,r,0))
#define IODEVRH0(d,r) (*(const volatile uint16_t *)IODEVA(d,r,0))
#define IODEVRH1(d,r) (*(const volatile uint16_t *)IODEVA(d,r,2))
#define IODEVRL(d,r)  (*(const volatile uint32_t *)IODEVA(d,r,0))

#endif

#define CPU_HZ		84000000

#define LED_DEV		0
#define LED		IODEVB(LED_DEV,0)

#define RESET_DEV	1
#define RESET_CMD	IODEVL(RESET_DEV,0)

#define ROMCOPY_DEV	2
#define ROMCOPY_DONE	IODEVRL(ROMCOPY_DEV,0)

#define CON_DEV		3
#define CONSOLE		IODEVB(CON_DEV,0)
#define CON_BAUDDIV	IODEVL(CON_DEV,1)
#define CON_BAUD_BASE	(CPU_HZ >> 4)
#define CON_BAUD_BITS	24
#define CON_STATUS	IODEVRL(CON_DEV,2)
#define CON_IRQEN	IODEVL(CON_DEV,3)

#define SD_DEV		4
#define SD_CTL		IODEVL(SD_DEV,0)
#define SD_CTL_SPEED	IODEVB0(SD_DEV,0)
#define SD_CTL_CLRCRC	IODEVB1(SD_DEV,0)
#define SD_CRC7_RD	IODEVRB0(SD_DEV,2)
#define SD_CRC16_RD	IODEVRH1(SD_DEV,2)
#define SD_CRC7_WR	IODEVRB0(SD_DEV,3)
#define SD_CRC16_WR	IODEVRH1(SD_DEV,3)

/* Speed values, not including -1 adjustment */
#define SD_SLOW		128	/* 328 kHz */
#define SD_20MHZ	3	/* Really 14 MHz */
#define SD_25MHZ	2	/* Really 21 MHz */
#define SD_50MHZ	1	/* Really 42 MHz */

#define SYSCLOCK_DEV		5
#define SYSCLOCK_DATETIME	IODEVL(SYSCLOCK_DEV,0)
#define SYSCLOCK_TICK		IODEVL(SYSCLOCK_DEV,1)
#define SYSCLOCK_TICK_HOLD	IODEVH0(SYSCLOCK_DEV,1)
#define SYSCLOCK_TICK_NOW	IODEVH1(SYSCLOCK_DEV,1)

#endif /* IODEV_H */