# -------------------------------------------------------------------------- # # # Copyright (C) 2019 Intel Corporation. All rights reserved. # Your use of Intel Corporation's design tools, logic functions # and other software and tools, and any partner logic # functions, and any output files from any of the foregoing # (including device programming or simulation files), and any # associated documentation or information are expressly subject # to the terms and conditions of the Intel Program License # Subscription Agreement, the Intel Quartus Prime License Agreement, # the Intel FPGA IP License Agreement, or other applicable license # agreement, including, without limitation, that your use is for # the sole purpose of programming logic devices manufactured by # Intel and sold by Intel or its authorized distributors. Please # refer to the applicable agreement for further details, at # https://fpgasoftware.intel.com/eula. # # -------------------------------------------------------------------------- # # # Quartus Prime # Version 18.1.1 Build 646 04/11/2019 SJ Lite Edition # Date created = 13:01:33 February 22, 2021 # # -------------------------------------------------------------------------- # # # Notes: # # 1) The default values for assignments are stored in the file: # max80_assignment_defaults.qdf # If this file doesn't exist, see file: # assignment_defaults.qdf # # 2) Altera recommends that you do not modify this file. This # file is updated automatically by the Quartus Prime software # and any changes you make may be lost or overwritten. # # -------------------------------------------------------------------------- # set_global_assignment -name FAMILY "Cyclone IV E" set_global_assignment -name DEVICE EP4CE15F17C8 set_global_assignment -name TOP_LEVEL_ENTITY max80 set_global_assignment -name ORIGINAL_QUARTUS_VERSION 18.1.1 set_global_assignment -name PROJECT_CREATION_TIME_DATE "13:01:33 FEBRUARY 22, 2021" set_global_assignment -name LAST_QUARTUS_VERSION "20.1.1 Lite Edition" set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0 set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85 set_global_assignment -name DEVICE_FILTER_PACKAGE EQFP set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144 set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8 set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 256 set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (Verilog)" set_global_assignment -name EDA_TIME_SCALE "100 ps" -section_id eda_simulation set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "VERILOG HDL" -section_id eda_simulation set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_timing set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_symbol set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_signal_integrity set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_boundary_scan set_global_assignment -name DEVICE_MIGRATION_LIST "EP4CE15F17C8,EP4CE6F17C8,EP4CE10F17C8" set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top set_global_assignment -name VCCA_USER_VOLTAGE 2.5V set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "NO HEAT SINK WITH STILL AIR" set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)" set_global_assignment -name FLOW_ENABLE_POWER_ANALYZER ON set_global_assignment -name POWER_DEFAULT_INPUT_IO_TOGGLE_RATE 12.5% set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008 set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF set_global_assignment -name VERILOG_INPUT_VERSION SYSTEMVERILOG_2005 set_global_assignment -name VERILOG_SHOW_LMF_MAPPING_MESSAGES OFF set_global_assignment -name SAFE_STATE_MACHINE OFF set_global_assignment -name REMOVE_REDUNDANT_LOGIC_CELLS ON set_global_assignment -name HDL_MESSAGE_LEVEL LEVEL3 set_global_assignment -name SYNTH_PROTECT_SDC_CONSTRAINT ON set_global_assignment -name SYNTH_MESSAGE_LEVEL HIGH set_global_assignment -name OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING "PACK ALL IO REGISTERS" set_global_assignment -name WEAK_PULL_UP_RESISTOR ON set_global_assignment -name ENABLE_OCT_DONE OFF set_global_assignment -name ENABLE_CONFIGURATION_PINS OFF set_global_assignment -name ENABLE_BOOT_SEL_PIN OFF set_global_assignment -name EXTERNAL_FLASH_FALLBACK_ADDRESS 0 set_global_assignment -name USE_CONFIGURATION_DEVICE ON set_global_assignment -name INTERNAL_FLASH_UPDATE_MODE "SINGLE COMP IMAGE" set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF set_global_assignment -name GENERATE_JBC_FILE ON set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL" set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to sr_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to clock_48 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 6 set_global_assignment -name IOBANK_VCCIO 2.5V -section_id 5 set_instance_assignment -name IO_STANDARD LVDS -to hdmi_d[2] set_instance_assignment -name IO_STANDARD LVDS -to hdmi_d[1] set_instance_assignment -name IO_STANDARD LVDS -to hdmi_d[0] set_instance_assignment -name IO_STANDARD LVDS -to hdmi_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_d[2] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_d[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_d[0] set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 2 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 1 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 8 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 7 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 4 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 3 set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO" set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to flash_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to flash_cs_n set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to flash_miso set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to flash_mosi set_instance_assignment -name IO_STANDARD "2.5 V" -to clock_48 set_global_assignment -name EDA_MAP_ILLEGAL_CHARACTERS ON -section_id eda_simulation set_global_assignment -name EDA_ENABLE_GLITCH_FILTERING ON -section_id eda_simulation set_global_assignment -name EDA_WRITE_NODES_FOR_POWER_ESTIMATION ALL_NODES -section_id eda_simulation set_global_assignment -name EDA_TEST_BENCH_DESIGN_INSTANCE_NAME max80 -section_id eda_simulation set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to led[1] set_global_assignment -name CYCLONEIII_CONFIGURATION_DEVICE EPCQ128A set_global_assignment -name GENERATE_JAM_FILE OFF set_global_assignment -name FORCE_CONFIGURATION_VCCIO ON set_global_assignment -name CONFIGURATION_VCCIO_LEVEL 3.3V set_global_assignment -name RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP "AS OUTPUT DRIVING GROUND" set_global_assignment -name POST_MODULE_SCRIPT_FILE "quartus_sh:scripts/postmodule.tcl" set_global_assignment -name OPTIMIZATION_MODE "AGGRESSIVE PERFORMANCE" set_global_assignment -name AUTO_RAM_TO_LCELL_CONVERSION ON set_global_assignment -name SYNTH_GATED_CLOCK_CONVERSION ON set_global_assignment -name PRE_MAPPING_RESYNTHESIS ON set_global_assignment -name ROUTER_CLOCKING_TOPOLOGY_ANALYSIS ON set_global_assignment -name QII_AUTO_PACKED_REGISTERS "SPARSE AUTO" set_global_assignment -name SAVE_DISK_SPACE OFF set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS ON set_global_assignment -name SMART_RECOMPILE ON set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS TEST_BENCH_MODE -section_id eda_simulation set_global_assignment -name EDA_NATIVELINK_SIMULATION_TEST_BENCH testclk -section_id eda_simulation set_global_assignment -name EDA_TEST_BENCH_NAME testclk -section_id eda_simulation set_global_assignment -name EDA_DESIGN_INSTANCE_NAME max80 -section_id testclk set_global_assignment -name EDA_TEST_BENCH_RUN_SIM_FOR "1 ms" -section_id testclk set_global_assignment -name EDA_TEST_BENCH_MODULE_NAME testclk -section_id testclk set_global_assignment -name EDA_TEST_BENCH_FILE simulation/testclk.sv -section_id testclk set_global_assignment -name EDA_NATIVELINK_PORTABLE_FILE_PATHS ON -section_id eda_simulation set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to tty_dtr set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to tty_rts set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to tty_txd set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to tty_rxd set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to tty_cts set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to hdmi_scl set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to hdmi_sda set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to i2c_scl set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to i2c_sda set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to rtc_32khz set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to rtc_int_n set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to exth_ha set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to exth_hb set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to exth_hc set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to exth_hd set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to exth_he set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to exth_hf set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to exth_hg set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to exth_hh set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to esp_int set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to esp_io0 set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sd_dat[3] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sd_dat[2] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sd_dat[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sd_dat[0] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sd_dat set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to spi_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to spi_cs_esp_n set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to spi_cs_flash_n set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to spi_miso set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to spi_mosi set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio[5] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio[4] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio[3] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio[2] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio[0] set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to gpio set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_inp_n[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_a[13] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_a[2] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_a[6] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_a[0] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to abc_a[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tdo set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tck set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to abc_xinpstb_n set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tdi set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tms set_global_assignment -name OCP_HW_EVAL DISABLE set_global_assignment -name TIMING_ANALYZER_DO_REPORT_TIMING ON set_global_assignment -name READ_OR_WRITE_IN_BYTE_ADDRESS ON set_global_assignment -name POWER_REPORT_POWER_DISSIPATION ON set_global_assignment -name POWER_USE_DEVICE_CHARACTERISTICS MAXIMUM set_global_assignment -name POWER_USE_TA_VALUE 35 set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top set_global_assignment -name VERILOG_FILE ip/statusram.v set_global_assignment -name VERILOG_INCLUDE_FILE iodevs.vh set_global_assignment -name SYSTEMVERILOG_FILE tty.sv set_global_assignment -name SYSTEMVERILOG_FILE sdcard.sv set_global_assignment -name SYSTEMVERILOG_FILE sysclock.sv set_global_assignment -name SYSTEMVERILOG_FILE i2c.sv set_global_assignment -name SYSTEMVERILOG_FILE abcbus.sv set_global_assignment -name VERILOG_FILE ip/abcmapram.v set_global_assignment -name VERILOG_FILE ip/fastmem_ip.v set_global_assignment -name SYSTEMVERILOG_FILE fast_mem.sv set_global_assignment -name MIF_FILE ../fw/boot.mif set_global_assignment -name VERILOG_FILE picorv32.v set_global_assignment -name SYSTEMVERILOG_FILE functions.sv set_global_assignment -name SYSTEMVERILOG_FILE spi_master.sv set_global_assignment -name SYSTEMVERILOG_FILE sdram.sv set_global_assignment -name SYSTEMVERILOG_FILE spirom.sv set_global_assignment -name VERILOG_FILE ip/ddio_out.v set_global_assignment -name TCL_SCRIPT_FILE scripts/post_quartus_asm.tcl set_global_assignment -name TCL_SCRIPT_FILE scripts/postmodule.tcl set_global_assignment -name SOURCE_FILE max80jic.cof set_global_assignment -name VERILOG_FILE ip/hdmitx.v set_global_assignment -name VERILOG_FILE ip/pll.v set_global_assignment -name SYSTEMVERILOG_FILE transpose.sv set_global_assignment -name SYSTEMVERILOG_FILE synchro.sv set_global_assignment -name SYSTEMVERILOG_FILE tmdsenc.sv set_global_assignment -name SDC_FILE max80.sdc set_global_assignment -name SYSTEMVERILOG_FILE max80.sv set_global_assignment -name SOURCE_FILE max80.pins set_global_assignment -name SOURCE_TCL_SCRIPT_FILE scripts/pins.tcl set_global_assignment -name VERILOG_FILE ip/fifo.v set_global_assignment -name VERILOG_FILE ip/ddufifo.v