//
// Simple hardware random number generator
//

module rng
#(parameter
  nclocks = 1,	// Asynchronous clocks
  width = 32	// Output bus width
  )
   (
    // System clock
    input	       sys_clk,

     // Output data
    output [width-1:0] q,

     // Randomness inputs
    input [nclocks-1:0] clocks, // Asynchronous clocks
    inout [2:0]        rngio		// Unconnected pins with pullups
    );


   wire		 int_clock;	// Internal oscillator clock

   // Internal on-chip oscillator
   int_osc int_osc
     (
      .clkout ( int_clock ),
      .oscena ( 1'b1 )
      );

   // De facto RC oscillator using the rngio pins
   assign rngio[0] = rngio[2] ? 1'b0 : 1'bz;
   assign rngio[1] = rngio[0] ? 1'b0 : 1'bz;
   assign rngio[2] = rngio[1] ? 1'b0 : 1'bz;

   wire [nclocks+1:0] sclocks;

   synchronizer #(.width(nclocks+2)) synchro
     (
      .rst_n ( 1'b1 ),
      .clk ( sys_clk ),
      .d ( { clocks, rngio[0], int_clk } ),
      .q ( sclocks )
      );

   // LFSR randomness accumulator

   // See http://users.ece.cmu.edu/~koopman/crc/crc36.html for
   // choice of polynomial.
   localparam poly_width = 33;
   localparam [poly_width:0] poly = 34'h2_0000_009d;

   localparam lsfr_max = width > poly_width ? width-1 : poly_width-1;

   reg [lsfr_max:0] lsfr;

   always @(posedge sys_clk)
     lsfr <= {lsfr[lsfr_max-1:0], ^sclocks} ^
	     (lsfr[lsfr_max-1] ? poly : {poly_width{1'b0}});

   assign q = lsfr[lsfr_max:lsfr_max-width+1];
endmodule // rng