# -*- tcl -*- -------------------------------------------------------------- # # # Copyright (C) 2019 Intel Corporation. All rights reserved. # Your use of Intel Corporation's design tools, logic functions # and other software and tools, and any partner logic # functions, and any output files from any of the foregoing # (including device programming or simulation files), and any # associated documentation or information are expressly subject # to the terms and conditions of the Intel Program License # Subscription Agreement, the Intel Quartus Prime License Agreement, # the Intel FPGA IP License Agreement, or other applicable license # agreement, including, without limitation, that your use is for # the sole purpose of programming logic devices manufactured by # Intel and sold by Intel or its authorized distributors. Please # refer to the applicable agreement for further details, at # https://fpgasoftware.intel.com/eula. # # -------------------------------------------------------------------------- # # # Quartus Prime # Version 18.1.1 Build 646 04/11/2019 SJ Lite Edition # Date created = 13:01:33 February 22, 2021 # # -------------------------------------------------------------------------- # # # Notes: # # 1) The default values for assignments are stored in the file: # v1_assignment_defaults.qdf # If this file doesn't exist, see file: # assignment_defaults.qdf # # 2) Altera recommends that you do not modify this file. This # file is updated automatically by the Quartus Prime software # and any changes you make may be lost or overwritten. # # -------------------------------------------------------------------------- # set_global_assignment -name FAMILY "Cyclone IV E" set_global_assignment -name DEVICE EP4CE15F17C8 set_global_assignment -name ORIGINAL_QUARTUS_VERSION 21.1.0 set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:21:14 DECEMBER 22, 2021" set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0 set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85 set_global_assignment -name DEVICE_FILTER_PACKAGE EQFP set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144 set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8 set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 256 set_global_assignment -name EDA_SIMULATION_TOOL "Questa Intel FPGA (SystemVerilog)" set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "SYSTEMVERILOG HDL" -section_id eda_simulation set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_timing set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_symbol set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_signal_integrity set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_boundary_scan set_global_assignment -name DEVICE_MIGRATION_LIST EP4CE15F17C8 set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top set_global_assignment -name VCCA_USER_VOLTAGE 2.5V set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "NO HEAT SINK WITH STILL AIR" set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)" set_global_assignment -name POWER_DEFAULT_INPUT_IO_TOGGLE_RATE "12.5 %" set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008 set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF set_global_assignment -name VERILOG_INPUT_VERSION SYSTEMVERILOG_2005 set_global_assignment -name VERILOG_SHOW_LMF_MAPPING_MESSAGES OFF set_global_assignment -name REMOVE_REDUNDANT_LOGIC_CELLS ON set_global_assignment -name HDL_MESSAGE_LEVEL LEVEL3 set_global_assignment -name SYNTH_PROTECT_SDC_CONSTRAINT ON set_global_assignment -name SYNTH_MESSAGE_LEVEL HIGH set_global_assignment -name OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING "PACK ALL IO REGISTERS" set_global_assignment -name MUX_RESTRUCTURE AUTO set_global_assignment -name WEAK_PULL_UP_RESISTOR ON set_global_assignment -name ENABLE_OCT_DONE OFF set_global_assignment -name ENABLE_CONFIGURATION_PINS OFF set_global_assignment -name ENABLE_BOOT_SEL_PIN OFF set_global_assignment -name USE_CONFIGURATION_DEVICE ON set_global_assignment -name INTERNAL_FLASH_UPDATE_MODE "SINGLE COMP IMAGE" set_global_assignment -name STRATIXIII_UPDATE_MODE REMOTE set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF set_global_assignment -name GENERATE_JBC_FILE ON set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL" set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to sr_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to clock_* set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 6 set_global_assignment -name IOBANK_VCCIO 2.5V -section_id 5 set_instance_assignment -name IO_STANDARD LVDS -to hdmi_d[2] set_instance_assignment -name IO_STANDARD LVDS -to hdmi_d[1] set_instance_assignment -name IO_STANDARD LVDS -to hdmi_d[0] set_instance_assignment -name IO_STANDARD LVDS -to hdmi_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_d[2] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_d[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to hdmi_d[0] set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 2 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 1 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 8 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 7 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 4 set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 3 set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DATA0_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DATA1_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO" set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO" set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to flash_clk set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to flash_cs_n set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to board_id set_global_assignment -name EDA_MAP_ILLEGAL_CHARACTERS ON -section_id eda_simulation set_global_assignment -name EDA_WRITE_NODES_FOR_POWER_ESTIMATION ALL_NODES -section_id eda_simulation set_global_assignment -name EDA_TEST_BENCH_DESIGN_INSTANCE_NAME max80 -section_id eda_simulation set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to led[1] set_global_assignment -name CYCLONEIII_CONFIGURATION_DEVICE EPCQ128A set_global_assignment -name FORCE_CONFIGURATION_VCCIO ON set_global_assignment -name CONFIGURATION_VCCIO_LEVEL 3.3V set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED WITH WEAK PULL-UP" set_global_assignment -name PRE_FLOW_SCRIPT_FILE "quartus_sh:scripts/preflow.tcl" set_global_assignment -name POST_MODULE_SCRIPT_FILE "quartus_sh:scripts/postmodule.tcl" set_global_assignment -name OPTIMIZATION_MODE "AGGRESSIVE PERFORMANCE" set_global_assignment -name AUTO_RAM_TO_LCELL_CONVERSION ON set_global_assignment -name SYNTH_GATED_CLOCK_CONVERSION ON set_global_assignment -name PRE_MAPPING_RESYNTHESIS ON set_global_assignment -name ROUTER_CLOCKING_TOPOLOGY_ANALYSIS ON set_global_assignment -name QII_AUTO_PACKED_REGISTERS "SPARSE AUTO" set_global_assignment -name SAVE_DISK_SPACE OFF set_global_assignment -name TIMING_ANALYZER_MULTICORNER_ANALYSIS ON set_global_assignment -name SMART_RECOMPILE ON set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS TEST_BENCH_MODE -section_id eda_simulation set_global_assignment -name EDA_NATIVELINK_SIMULATION_TEST_BENCH testclk -section_id eda_simulation set_global_assignment -name EDA_TEST_BENCH_NAME testclk -section_id eda_simulation set_global_assignment -name EDA_DESIGN_INSTANCE_NAME max80 -section_id testclk set_global_assignment -name EDA_TEST_BENCH_RUN_SIM_FOR "1 ms" -section_id testclk set_global_assignment -name EDA_TEST_BENCH_MODULE_NAME testclk -section_id testclk set_global_assignment -name EDA_TEST_BENCH_FILE simulation/testclk.sv -section_id testclk set_global_assignment -name EDA_NATIVELINK_PORTABLE_FILE_PATHS ON -section_id eda_simulation set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to rtc_32khz set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to exth_hc set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to exth_hh set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tdo set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tck set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tdi set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to altera_reserved_tms set_global_assignment -name OCP_HW_EVAL DISABLE set_global_assignment -name TIMING_ANALYZER_DO_REPORT_TIMING ON set_global_assignment -name READ_OR_WRITE_IN_BYTE_ADDRESS ON set_global_assignment -name POWER_REPORT_POWER_DISSIPATION ON set_global_assignment -name POWER_USE_DEVICE_CHARACTERISTICS MAXIMUM set_global_assignment -name POWER_USE_TA_VALUE 35 # PLL 2 ends up located appropriately without an explicit constraint set_location_assignment PLL_3 -to "max80:max80|pll3:pll3|altpll:altpll_component|pll3_altpll:auto_generated|pll1" set_location_assignment PLL_4 -to "max80:max80|pll4:pll4|altpll:altpll_component|pll4_altpll:auto_generated|pll1" set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[15] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[14] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[13] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[12] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[11] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[10] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[9] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[8] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[7] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[6] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[5] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[4] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[3] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[2] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to sr_dq[0] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to rngio[0] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to rngio[1] set_instance_assignment -name WEAK_PULL_UP_RESISTOR OFF -to rngio[2] set_global_assignment -name VERILOG_FILE usb/usb_desc.v set_global_assignment -name SYSTEMVERILOG_FILE usb/usb_serial/src_v/usb_cdc_core.sv set_global_assignment -name SYSTEMVERILOG_FILE usb/usb_serial/src_v/usbf_device_core.sv set_global_assignment -name SYSTEMVERILOG_FILE rng.sv set_global_assignment -name QIP_FILE ip/int_osc/synthesis/int_osc.qip set_global_assignment -name VERILOG_FILE ip/pll4.v set_global_assignment -name VERILOG_FILE ip/pll3.v set_global_assignment -name VERILOG_FILE usb/usb_fs_phy/src_v/usb_fs_phy.v set_global_assignment -name VERILOG_FILE usb/usb_serial/src_v/usbf_sie_tx.v set_global_assignment -name VERILOG_FILE usb/usb_serial/src_v/usbf_sie_rx.v set_global_assignment -name VERILOG_FILE usb/usb_serial/src_v/usbf_defs.v set_global_assignment -name VERILOG_FILE usb/usb_serial/src_v/usbf_crc16.v set_global_assignment -name SYSTEMVERILOG_FILE usb/usb.sv set_global_assignment -name VERILOG_INCLUDE_FILE usb/usbparam.vh set_global_assignment -name SYSTEMVERILOG_FILE dcpktfifo.sv set_global_assignment -name VERILOG_FILE ip/statusram.v set_global_assignment -name VERILOG_INCLUDE_FILE iodevs.vh set_global_assignment -name SYSTEMVERILOG_FILE serial.sv set_global_assignment -name SYSTEMVERILOG_FILE sdcard.sv set_global_assignment -name SYSTEMVERILOG_FILE sysclock.sv set_global_assignment -name SYSTEMVERILOG_FILE i2c.sv set_global_assignment -name SYSTEMVERILOG_FILE abcbus.sv set_global_assignment -name VERILOG_FILE ip/abcmapram.v set_global_assignment -name SYSTEMVERILOG_FILE fast_mem.sv set_global_assignment -name MIF_FILE mif/sram.mif set_global_assignment -name VERILOG_FILE picorv32.v set_global_assignment -name SYSTEMVERILOG_FILE functions.sv set_global_assignment -name SYSTEMVERILOG_FILE spi_master.sv set_global_assignment -name SYSTEMVERILOG_FILE sdram.sv set_global_assignment -name SYSTEMVERILOG_FILE spirom.sv set_global_assignment -name SYSTEMVERILOG_FILE clkbuf.sv set_global_assignment -name VERILOG_FILE ip/ddio_out.v set_global_assignment -name TCL_SCRIPT_FILE scripts/post_quartus_asm.tcl set_global_assignment -name TCL_SCRIPT_FILE scripts/postmodule.tcl set_global_assignment -name VERILOG_FILE ip/hdmitx.v set_global_assignment -name SYSTEMVERILOG_FILE transpose.sv set_global_assignment -name SYSTEMVERILOG_FILE synchro.sv set_global_assignment -name SYSTEMVERILOG_FILE tmdsenc.sv set_global_assignment -name SYSTEMVERILOG_FILE video.sv set_global_assignment -name SYSTEMVERILOG_FILE esp.sv set_global_assignment -name SDC_FILE max80.sdc set_global_assignment -name SYSTEMVERILOG_FILE max80.sv set_global_assignment -name SOURCE_TCL_SCRIPT_FILE scripts/pins.tcl set_global_assignment -name VERILOG_FILE ip/fifo.v set_global_assignment -name VERILOG_FILE ip/ddufifo.v set_global_assignment -name SYSTEMVERILOG_FILE vjtag_max80.sv set_global_assignment -name VERILOG_FILE ip/vjtag/synthesis/vjtag.v set_global_assignment -name QIP_FILE ip/vjtag/synthesis/vjtag.qip set_global_assignment -name SYSTEMVERILOG_FILE fpgarst.sv set_global_assignment -name VERILOG_FILE ip/altera_remote_update_core.v set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top