| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465 |
- <!DOCTYPE html>
- <html lang="en">
- <head>
- <link rel="stylesheet" href="max80.css" />
- <title class="update">MAX80: Update</title>
- <script src="max80.js"></script>
- </head>
- <body>
- <x-inc src="head.html"></x-inc>
- <h1 class="update">Update</h1>
- <form class="hw" id="boardid" action="sys/setboardrev" method="post"
- onsubmit="uploadform()" data-ref="1" data-ref-url="update.html">
- <fieldset>
- <legend>Hardware Version</legend>
- <label class="unlock">
- <b>Unlock Programming</b>
- <input type="checkbox" name="unlock" id="unlock" onchange="bropen()">
- </label>
- <label class="ver">
- <b>Hardware Version</b>
- <select name="boardrevs" id="boardrevs" onchange="brn()" disabled>
- <option value="MAX80 v1">v1.0.0</option>
- <option value="MAX80 v2">v2.0.0</option>
- <option value="MAX80 v2.0.1">v2.0.1</option>
- <option class="other" value="MAX80 v">other...</option>
- </select>
- <input type="text" name="max80.hw.ver" id="ver"
- oninput="brt()" disabled />
- </label>
- <p id="warnrev" class="warnrev hidden">Be careful: the board
- might fail to boot if the board revision is programmed
- incorrectly. In that case, reflashing via USB/serial port will
- be necessary.</p>
- <button type="submit" id="setrev" disabled>Write to flash</button>
- </fieldset>
- </form>
- <form id="upload" action="sys/fwupdate" method="post"
- onsubmit="uploadform()" data-ref="10" data-ref-url="status.html">
- <fieldset class="fw">
- <legend>Firmware</legend>
- <p id="norev" class="norev hidden">
- BOARD REVISION NOT PROGRAMMED. YOU MUST PROGRAM THE BOARD
- REVISION BEFORE UPDATING THE FIRMWARE. MAKE SURE YOU KNOW
- WHAT REVISION YOUR BOARD IS BEFORE DOING SO.
- </p>
- <input type="file" name="file" hidden accept=".fw" onchange="uploadform()" />
- <button type="submit" class="fromfile" id="upload.start"
- onclick="sib(this,'input').value=''">Update from file</button>
- <progress value="0"></progress>
- </fieldset>
- <output></output>
- <div class="onerr">
- <h3>Possible troubleshooting steps:</h3>
- <ol>
- <li class="retry">Try again</li>
- <li class="jtag">Make sure no JTAG cable is plugged in</li>
- <li class="power">Power cycle board (remove both USB and power off ABC host)</li>
- <li class="esp">Separately update ESP32 over USB before trying again</li>
- <li class="console">Check serial console for more detailed status messages</li>
- </ol>
- </div>
- <script src="update.js"></script>
- </form>
- </body>
- </html>
|
