max80_fw/esp32/max80/max80.ino

// #define DEBUG

#define BAUD_RATE 115200

#include "common.h"

#include "fpga.h"
#include "wifi.h"
#include "config.h"
#include "led.h"

#include <freertos/task_snapshot.h>
#include <esp_heap_caps.h>

#define PIN_USB_PWR_EN		7
#define PIN_USB_PWR_SINK	8

static void dump_config()
{
    printf("--- Configuration:\n");
    write_env(stdout, false);
    write_env(stdout, true);
    printf("--- End configuration\n");
}

uint8_t max80_board_version;

static void init_hw()
{
    // Start out with disabled shared I/O pins
    for (int i = 1; i <= 18; i++)
	pinMode(i, INPUT);

    // Configure USB power control. Try to detect 36k pulldown
    // resistor on USB_PWR_EN first, to determine board version 2
    // (on board v1, this pin in N/C.)
    //
    // This detection algorithm is sketchy at best. In the end the
    // better option probably would be to use the ADC mode of the input
    // pin...
    pinMode(PIN_USB_PWR_SINK, OUTPUT);		// IO8: USB_PWR_SINK
    digitalWrite(PIN_USB_PWR_SINK, 0);		// This is a power sink

    pinMode(PIN_USB_PWR_EN, OUTPUT);
    digitalWrite(PIN_USB_PWR_EN, 0);
    delayMicroseconds(100);

    pinMode(PIN_USB_PWR_EN, INPUT_PULLUP);
    delayMicroseconds(50);

    pinMode(PIN_USB_PWR_EN, INPUT);
    delayMicroseconds(50);

    max80_board_version = digitalRead(PIN_USB_PWR_EN) ? 1 : 2;

    pinMode(PIN_USB_PWR_EN, OUTPUT);
    digitalWrite(PIN_USB_PWR_EN, 0);

    // Configure LEDs
    led_init();
    led_set(LED_BLUE, LED_FLASH);	// ESP32 software initializing

    // Enable external PSRAM for heap
    heap_caps_malloc_extmem_enable(2048); // >= 2K allocations in PSRAM

    printf("[PCB]  MAX80 board version: %u\n", max80_board_version);
    setenv_ul("status.max80.hw.ver", max80_board_version);
}

void setup() {
    const char *fwdate = __DATE__ " " __TIME__;
    printf("[START] MAX80 firmware compiled on %s\n", fwdate);
    init_hw();
    fpga_service_init();
    init_config();
    setenv("status.max80.fw.date", fwdate, 1);
    fpga_service_enable(true);
    SetupWiFi();
    printf("[RDY]\n");
    dump_config();
    led_set(LED_BLUE, LED_ON);	// Software ready

    printf("Total heap:  %d\n"
	   "Free heap:   %d\n"
	   "Total PSRAM: %d\n"
	   "Free PSRAM:  %d\n",
	   ESP.getHeapSize(), ESP.getFreeHeap(),
	   ESP.getPsramSize(), ESP.getFreePsram());
}

static inline char task_state(eTaskState state)
{
    switch (state) {
    case eInvalid:
	return 'X';
    case eReady:
    case eRunning:
	return 'R';
    case eBlocked:
	return 'D';
    case eSuspended:
	return 'S';
    case eDeleted:
	return 'Z';
    default:
	return '?';
    }
}

static void dump_tasks(void)
{
    TaskHandle_t task = NULL;

    while (1) {
	task = pxTaskGetNext(task);
	if (!task)
	    break;

	printf("%-16s %c %2u\n",
	       pcTaskGetName(task),
	       task_state(eTaskGetState(task)),
	       uxTaskPriorityGet(task));
    }
}

void loop() {
    printf("loop task: %s\n", pcTaskGetName(xTaskGetCurrentTaskHandle()));
    printf("idle task: %s\n", pcTaskGetName(xTaskGetIdleTaskHandle()));

    dump_tasks();

    putchar('\n');

    vTaskDelay(120 * configTICK_RATE_HZ);
}