max80_fw/esp32/max80/taproute.c

/*
 * This is a generated file!
 *
 * JTAG state routing table: to get from the horizontal
 * axis state to the vertical axis state, go in the given
 * direction. The table in this comment also shows the number
 * of transitions needed.
 *
 * from: TLR RTI SDS CDR SDR EDR PDR ED2 UDR SIS CIR SIR EIR PIR EI2 UIR
 *
 * TLR:  1/0 1/3 1/2 1/5 1/5 1/4 1/5 1/4 1/3 1/1 1/5 1/5 1/4 1/5 1/4 1/3
 * RTI:  0/1 0/0 1/3 1/3 1/3 1/2 1/3 1/2 0/1 1/2 1/3 1/3 1/2 1/3 1/2 0/1
 * SDS:  0/2 1/1 1/0 1/3 1/3 1/2 1/3 1/2 1/1 1/3 1/3 1/3 1/2 1/3 1/2 1/1
 * CDR:  0/3 1/2 0/1 1/0 1/4 1/3 1/4 1/3 1/2 1/4 1/4 1/4 1/3 1/4 1/3 1/2
 * SDR:  0/4 1/3 0/2 0/1 0/0 0/3 1/2 0/1 1/3 1/5 1/5 1/5 1/4 1/5 1/4 1/3
 * EDR:  0/4 1/3 0/2 1/1 1/1 1/0 1/3 0/2 1/3 1/5 1/5 1/5 1/4 1/5 1/4 1/3
 * PDR:  0/5 1/4 0/3 1/2 1/2 0/1 0/0 0/3 1/4 1/6 1/6 1/6 1/5 1/6 1/5 1/4
 * ED2:  0/6 1/5 0/4 1/3 1/3 0/2 1/1 1/0 1/5 1/7 1/7 1/7 1/6 1/7 1/6 1/5
 * UDR:  0/5 1/4 0/3 1/2 1/2 1/1 1/2 1/1 1/0 1/6 1/6 1/6 1/5 1/6 1/5 1/4
 * SIS:  0/3 1/2 1/1 1/4 1/4 1/3 1/4 1/3 1/2 1/0 1/4 1/4 1/3 1/4 1/3 1/2
 * CIR:  0/4 1/3 1/2 1/5 1/5 1/4 1/5 1/4 1/3 0/1 1/0 1/5 1/4 1/5 1/4 1/3
 * SIR:  0/5 1/4 1/3 1/6 1/6 1/5 1/6 1/5 1/4 0/2 0/1 0/0 0/3 1/2 0/1 1/4
 * EIR:  0/5 1/4 1/3 1/6 1/6 1/5 1/6 1/5 1/4 0/2 1/1 1/1 1/0 1/3 0/2 1/4
 * PIR:  0/6 1/5 1/4 1/7 1/7 1/6 1/7 1/6 1/5 0/3 1/2 1/2 0/1 0/0 0/3 1/5
 * EI2:  0/7 1/6 1/5 1/8 1/8 1/7 1/8 1/7 1/6 0/4 1/3 1/3 0/2 1/1 1/0 1/6
 * UIR:  0/6 1/5 1/4 1/7 1/7 1/6 1/7 1/6 1/5 0/3 1/2 1/2 1/1 1/2 1/1 1/0
 *
 *  [0]  RTI RTI CDR SDR SDR PDR PDR SDR RTI CIR SIR SIR PIR PIR SIR RTI
 *  [1]  TLR SDS SIS EDR EDR UDR ED2 UDR SDS TLR EIR EIR UIR EI2 UIR SDS
 */

#include "jtag.h"

const uint16_t tap_state_route[16] = {
	0xffff,
	0x7efc,
	0xfffe,
	0xfffa,
	0xff42,
	0xff7a,
	0xff1a,
	0xffda,
	0xfffa,
	0xfffe,
	0xfdfe,
	0xa1fe,
	0xbdfe,
	0x8dfe,
	0xedfe,
	0xfdfe,
};