; code: lang=asm-collection tabSize=8
; macros for placing interrupt vectors in the middle of a block of threaded code
SPT_SKIP_INTVEC .macro
		dw spt_jp, .intvec_continue			; continue after the NMI vector
		PLACE_INTVEC
		; ld	sp,0
		reti
	.intvec_continue:
.endm

SPT_SKIP_NMIVEC .macro
		dw spt_jp, .nmivec_continue			; continue after the NMI vector
		; PLACE_NMIVEC
		PLACE_VEC $66
		; ld	sp,0					; on model 1, NMI is connected to reset button
		retn
	.nmivec_continue:
.endm

; Start a threaded-code section by pointing to it with SP and issuing RET
; immediately following this macro should be the addresses (and optionally,
; parameters) for the threaded code
SPTHREAD_BEGIN .macro
	.local threadstart
		ld	sp,.`threadstart
		ret
	.`threadstart:
.endm

; At the end of the threaded code section, place an address just beyond
; the list of addresses, to jump back to conventional code
SPTHREAD_END .macro
		dw	$+2
.endm

; Save the stack pointer into the stack registers.  This is analogous
; to pushing SP onto the (simulated) stack.  The shadow registers hold
; two copies of SP, and effectively become a 2-element stack.  This means
; that there can be up to two threaded code stack frames saved.  The
; innermost threaded stack frame can call a third-level machine-code
; subroutine, but that subroutine can't make any further calls or run
; threaded code itself.
SPTHREAD_SAVE .macro
		exx
		ex	af,af'		; save flags because of the add hl,sp instruction
		ex	de,hl
		ld	hl,0		; copy old sp to iy
		add	hl,sp
		ex	af,af'
		exx
.endm

; The opposite of SPTHREAD_SAVE.  Pops SP off the simulated stack in
; preparation for returning to the enclosing threaded stack frame.
SPTHREAD_RESTORE .macro
		exx
		ld	sp,hl		; resume from the thread location saved in hl'
		ex	de,hl
		exx
.endm

; The prologue for a subroutine that contains threaded code.
SPTHREAD_ENTER .macro
		SPTHREAD_SAVE
		SPTHREAD_BEGIN
.endm

; The epilogue for a subroutine that contains threaded code.  To be followed by RET
SPTHREAD_LEAVE .macro
		SPTHREAD_END
		SPTHREAD_RESTORE
.endm



MAC_SPT_CON_GOTO .macro row,col
		dw spt_con_goto, VBASE+(row*VLINE*2)+col*2
.endm

MAC_SPT_CON_OFFSET .macro row,col
		dw VBASE+(row*VLINE*2)+col*2
.endm