|
|
@@ -13,7 +13,7 @@ But squeezelite-esp32 is highly extensible and you can add
|
|
|
|
|
|
- Buttons and Rotary Encoder and map/combine them to various functions (play, pause, volume, next ...)
|
|
|
- IR receiver (no pullup resistor or capacitor needed, just the 38kHz receiver)
|
|
|
-- Monochrome, GrayScale or Color displays using SPI or I2S (supported drivers are SH1106, SSD1306, SSD1322, SSD1326/7, SSD1351, ST7735, ST7789 and IL9341).
|
|
|
+- Monochrome, GrayScale or Color displays using SPI or I2C (supported drivers are SH1106, SSD1306, SSD1322, SSD1326/7, SSD1351, ST7735, ST7789 and ILI9341).
|
|
|
|
|
|
Other features include
|
|
|
|
|
|
@@ -172,7 +172,7 @@ Ground -------------------------- coax signal ground
|
|
|
The NVS parameter "display_config" sets the parameters for an optional display. Syntax is
|
|
|
```
|
|
|
I2C,width=<pixels>,height=<pixels>[address=<i2c_address>][,reset=<gpio>][,HFlip][,VFlip][driver=SSD1306|SSD1326[:1|4]|SSD1327|SH1106]
|
|
|
-SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789[,rotate]]
|
|
|
+SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789|ILI9341[:16|18][,rotate]]
|
|
|
```
|
|
|
- back: a LED backlight used by some older devices (ST7735). It is PWM controlled for brightness
|
|
|
- reset: some display have a reset pin that is should normally be pulled up if unused
|
|
|
@@ -188,7 +188,7 @@ SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed
|
|
|
- SSD1675 is an e-ink paper and is experimental as e-ink is really not suitable for LMS du to its very low refresh rate
|
|
|
- ST7735 is a 128x160 65k color SPI [here](https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/1.8inch-lcd-module.htm). This needs a backlight control
|
|
|
- ST7789 is a 240x320 65k (262k not enabled) color SPI [here](https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/2inch-lcd-module.htm). It also exist with 240x240 displays. See **rotate** for use in portrait mode
|
|
|
-- IL9341 is another 240x320 65k (262k capable) color SPI. I've not used it much, the driver it has been provided by one external contributor to the project
|
|
|
+- ILI9341 is another 240x320 65k (262k capable) color SPI. I've not used it much, the driver it has been provided by one external contributor to the project
|
|
|
|
|
|
To use the display on LMS, add repository https://raw.githubusercontent.com/sle118/squeezelite-esp32/master/plugin/repo.xml. You will then be able to tweak how the vu-meter and spectrum analyzer are displayed, as well as size of artwork. You can also install the excellent plugin "Music Information Screen" which is super useful to tweak the layout.
|
|
|
|
philippe44