浏览代码

Update README.md

philippe44 1 年之前
父节点
当前提交
338eea33d1
共有 1 个文件被更改,包括 1 次插入1 次删除
  1. 1 1
      README.md

+ 1 - 1
README.md

@@ -277,7 +277,7 @@ GPIO can be set to GND provide or Vcc at boot. This is convenient to power devic
 
 The `<amp>` parameter can use used to assign a GPIO that will be set to active level (default 1) when playback starts. It will be reset when squeezelite becomes idle. The idle timeout is set on the squeezelite command line through `-C <timeout>`
 
-The `<power>` parameter can use used to assign a GPIO that will be set to active level (default 1) when player is powered on and reset when powered off
+The `<power>` parameter can use used to assign a GPIO that will be set to active level (default 1) when player is powered on and reset when powered off (in LMS, does not apply to AirPlay, Spotify or BT).
 
 If you have an audio jack that supports insertion (use :0 or :1 to set the level when inserted), you can specify which GPIO it's connected to. Using the parameter jack_mutes_amp allows to mute the amp when headset (e.g.) is inserted.