|
|
@@ -71,7 +71,7 @@ NB: You can use the pre-build binaries SqueezeAMP4MBFlash which has all the hard
|
|
|
- spdif_config: bck=33,ws=25,do=15
|
|
|
|
|
|
### ESP32-A1S
|
|
|
-Works with [ESP32-A1S](https://docs.ai-thinker.com/esp32-a1s) module that includes audio codec and headset output. You still need to use a demo board like [this](https://www.aliexpress.com/item/4001060963585.html) or an external amplifier if you want direct speaker connection. Note that there is a version with AC101 codec and another one with ES8388 (see below)
|
|
|
+Works with [ESP32-A1S](https://docs.ai-thinker.com/esp32-a1s) module that includes audio codec and headset output. You still need to use a demo board like [this](https://www.aliexpress.com/item/4001060963585.html) or an external amplifier if you want direct speaker connection. Note that there is a version with AC101 codec and another one with ES8388 with probably two variants - these boards are a mess (see below)
|
|
|
|
|
|
The board shown above has the following IO set
|
|
|
- amplifier: GPIO21
|
|
|
@@ -95,8 +95,10 @@ So a possible config would be
|
|
|
for AC101
|
|
|
- dac_config: model=AC101,bck=27,ws=26,do=25,di=35,sda=33,scl=32
|
|
|
|
|
|
-for ES8388
|
|
|
+for ES8388 (it seems that there are variants with same version number - a total mess)
|
|
|
- dac_config: model=ES8388,bck=5,ws=25,do=26,sda=18,scl=23,i2c=16
|
|
|
+or
|
|
|
+- dac_config: model=ES8388,bck=27,ws=25,do=26,sda=33,scl=32,i2c=16
|
|
|
### T-WATCH2020 by LilyGo
|
|
|
This is a fun [smartwatch](http://www.lilygo.cn/prod_view.aspx?TypeId=50036&Id=1290&FId=t3:50036:3) based on ESP32. It has a 240x240 ST7789 screen and onboard audio. Not very useful to listen to anything but it works. This is an example of a device that requires an I2C set of commands for its dac (see below). There is a build-option if you decide to rebuild everything by yourself, otherwise the I2S default option works with the following parameters
|
|
|
|
philippe44