|
|
@@ -54,7 +54,7 @@ The board showed above has the following IO set
|
|
|
- D5 -> GPIO19 as well (muxed with key3)
|
|
|
- The IO connector also brings GPIO5, GPIO18, GPIO19, GPIO21, GPIO22 and GPIO23 (don't forget it's muxed with keys!)
|
|
|
- The JTAG connector uses GPIO 12, 13, 14 and 15 (see dip switched) but these are also used for SD-card (and 13 is key2)
|
|
|
-- It's alwats possible to re-use GPIOO (download at boot) and GPIO1/GPIO3 which are RX/TX of UART0 but you'll lose trace
|
|
|
+- It's always possible to re-use GPIOO (download at boot) and GPIO1/GPIO3 which are RX/TX of UART0 but you'll lose trace
|
|
|
|
|
|
(note that some GPIO need pullups)
|
|
|
|
philippe44