2
0

Kconfig.projbuild 13 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445
  1. # This is a hack but it overrides some LWIP Kconfig
  2. # parameters because we are first
  3. config LWIP_MAX_SOCKETS
  4. range 1 32
  5. menu "Squeezelite-ESP32"
  6. menu "Logging"
  7. config LOGGING_SLIMPROTO
  8. string "logging level for slimproto"
  9. default "info"
  10. help
  11. Set logging level info|debug|sdebug
  12. config LOGGING_STREAM
  13. string "logging level for stream"
  14. default "info"
  15. help
  16. Set logging level info|debug|sdebug
  17. config LOGGING_DECODE
  18. string "logging level for decode"
  19. default "info"
  20. help
  21. Set logging level info|debug|sdebug
  22. config LOGGING_OUTPUT
  23. string "logging level for output"
  24. default "info"
  25. help
  26. Set logging level info|debug|sdebug
  27. endmenu
  28. config AMP_LOCKED
  29. bool
  30. config JACK_LOCKED
  31. bool
  32. config BAT_LOCKED
  33. bool
  34. config I2C_LOCKED
  35. bool
  36. config SPDIF_LOCKED
  37. bool
  38. config LED_LOCKED
  39. bool
  40. config SPKFAULT_LOCKED
  41. bool
  42. config MUTE_GPIO_LEVEL
  43. int
  44. default 0
  45. config TARGET_LOCKED
  46. bool
  47. default n
  48. menu "Target"
  49. choice OUTPUT_TYPE
  50. prompt "Main system"
  51. default BASIC_I2C_BT
  52. help
  53. Type of hardware platform
  54. config SQUEEZEAMP
  55. bool "SqueezeAMP"
  56. select JACK_LOCKED
  57. select BAT_LOCKED
  58. select I2C_LOCKED
  59. select LED_LOCKED
  60. select SPKFAULT_LOCKED
  61. select TARGET_LOCKED
  62. config MUSE
  63. bool "Muse"
  64. select JACK_LOCKED
  65. select BAT_LOCKED
  66. select I2C_LOCKED
  67. select AMP_LOCKED
  68. select TARGET_LOCKED
  69. config BASIC_I2C_BT
  70. bool "Generic I2S & Bluetooth"
  71. config TWATCH2020
  72. bool "T-WATCH2020 by LilyGo"
  73. select I2C_LOCKED
  74. select TARGET_LOCKED
  75. endchoice
  76. config RELEASE_API
  77. string "Software update URL"
  78. default "https://api.github.com/repos/sle118/squeezelite-esp32/releases"
  79. help
  80. Set the URL of the API that the front-end UI will use to fetch software updates
  81. config SQUEEZELITE_ESP32_RELEASE_URL
  82. string "Release URL"
  83. default "https://github.com/sle118/squeezelite-esp32/releases"
  84. help
  85. Set the URL where users can see a list of releases
  86. # you can't change default values once they are set so changing "Target" will not reset
  87. # project name if they are visible config - they have to be silent strings
  88. config PROJECT_NAME
  89. string
  90. default "SqueezeAMP" if SQUEEZEAMP
  91. default "Squeezelite-TWATCH" if TWATCH2020
  92. default "Muse" if MUSE
  93. default "Squeezelite-ESP32"
  94. config FW_PLATFORM_NAME
  95. string
  96. default "SqueezeAmp" if SQUEEZEAMP
  97. default "TWATCH" if TWATCH2020
  98. default "Muse" if MUSE
  99. default "ESP32"
  100. # AGGREGATES - begin
  101. # these parameters are "aggregates" that take precedence. They must have a default value
  102. config DAC_CONFIG
  103. string
  104. default "model=TAS57xx,bck=33,ws=25,do=32,sda=27,scl=26,mute=14:0" if SQUEEZEAMP
  105. default "model=I2S,bck=26,ws=25,do=33,i2c=53,sda=21,scl=22" if TWATCH2020
  106. default "model=I2S,bck=5,ws=25,do=26,di=35,i2c=16,sda=18,scl=23,mck" if MUSE
  107. default ""
  108. config SPDIF_CONFIG
  109. string
  110. default "bck=33,ws=25,do=15" if SQUEEZEAMP
  111. default ""
  112. config GPIO_EXP_CONFIG
  113. string
  114. default ""
  115. config SPI_CONFIG
  116. string
  117. default "dc=27,data=19,clk=18" if TWATCH2020
  118. default "mosi=15,miso=2,clk=14" if MUSE
  119. default ""
  120. config DISPLAY_CONFIG
  121. string
  122. default "SPI,driver=ST7789,width=240,height=240,cs=5,back=12,speed=16000000,HFlip,VFlip" if TWATCH2020
  123. default ""
  124. config ETH_CONFIG
  125. string
  126. default ""
  127. # AGGREGATES - end
  128. config DAC_CONTROLSET
  129. string
  130. default "{ \"init\": [ {\"reg\":41, \"val\":128}, {\"reg\":18, \"val\":255} ], \"poweron\": [ {\"reg\":18, \"val\":64, \"mode\":\"or\"} ], \"poweroff\": [ {\"reg\":18, \"val\":191, \"mode\":\"and\"} ] }" if TWATCH2020
  131. default "{\"init\":[ {\"reg\":0,\"val\":128}, {\"reg\":0,\"val\":0}, {\"reg\":25,\"val\":4}, {\"reg\":1,\"val\":80}, {\"reg\":2,\"val\":0}, {\"reg\":8,\"val\":0}, {\"reg\":4,\"val\":192}, {\"reg\":0,\"val\":18}, {\"reg\":1,\"val\":0}, {\"reg\":23,\"val\":24}, {\"reg\":24,\"val\":2}, {\"reg\":38,\"val\":9}, {\"reg\":39,\"val\":144}, {\"reg\":42,\"val\":144}, {\"reg\":43,\"val\":128}, {\"reg\":45,\"val\":128}, {\"reg\":27,\"val\":0}, {\"reg\":26,\"val\":0}, {\"reg\":2,\"val\":240}, {\"reg\":2,\"val\":0}, {\"reg\":29,\"val\":28}, {\"reg\":4,\"val\":48}, {\"reg\":25,\"val\":0}, {\"reg\":46,\"val\":33}, {\"reg\":47,\"val\":33} ]}" if MUSE
  132. default ""
  133. config AUDIO_CONTROLS
  134. string
  135. default "[{\"gpio\":32, \"pull\":true, \"long_press\":1000, \"normal\":{\"pressed\":\"ACTRLS_VOLDOWN\"}, \"longpress\":{\"pressed\":\"ACTRLS_PREV\"}}, {\"gpio\":19, \"pull\":true, \"long_press\":1000, \"normal\":{\"pressed\":\"ACTRLS_VOLUP\"}, \"longpress\":{\"pressed\":\"ACTRLS_NEXT\"}}, {\"gpio\":12, \"pull\":true, \"long_press\":1000, \"normal\":{\"pressed\":\"ACTRLS_TOGGLE\"},\"longpress\":{\"pressed\":\"ACTRLS_POWER\"}}]" if MUSE
  136. default ""
  137. config BAT_CONFIG
  138. string
  139. default "channel=7,scale=20.24,atten=0" if SQUEEZEAMP
  140. default "channel=5,scale=7.00,atten=3,cells=1" if MUSE
  141. default ""
  142. config TARGET
  143. string
  144. default "muse" if MUSE
  145. default ""
  146. config AMP_GPIO
  147. int
  148. default 21 if MUSE
  149. default -1
  150. config JACK_GPIO
  151. int
  152. default 34 if SQUEEZEAMP || MUSE
  153. default -1
  154. config SPKFAULT_GPIO
  155. int
  156. default 2 if SQUEEZEAMP
  157. default -1
  158. config BAT_CHANNEL
  159. int
  160. default 7 if SQUEEZEAMP
  161. default -1
  162. config LED_GREEN_GPIO
  163. int
  164. default 12 if SQUEEZEAMP
  165. default -1
  166. config LED_RED_GPIO
  167. int
  168. default 13 if SQUEEZEAMP
  169. default -1
  170. config SET_GPIO
  171. string
  172. default "0=ir" if SQUEEZEAMP
  173. endmenu
  174. menu "Audio settings"
  175. menu "DAC settings"
  176. visible if BASIC_I2C_BT
  177. menu "I2S settings"
  178. config I2S_NUM
  179. int "I2S channel (0 or 1)"
  180. default 0
  181. help
  182. I2S dma channel to use.
  183. config I2S_BCK_IO
  184. int "I2S Bit clock GPIO number"
  185. default -1
  186. help
  187. I2S Bit Clock gpio pin to use.
  188. config I2S_WS_IO
  189. int "I2S Word Select GPIO number"
  190. default -1
  191. help
  192. I2S Word Select gpio pin to use.
  193. config I2S_DO_IO
  194. int "I2S Data Output GPIO number"
  195. default -1
  196. help
  197. I2S data output gpio pin to use.
  198. config I2S_DI_IO
  199. int "I2S Data Input GPIO number"
  200. default -1
  201. help
  202. I2S data input gpio pin to use (not used mostly, leave it to -1).
  203. config I2S_MCK_IO
  204. int "I2S Master Clock GPIO number"
  205. default -1
  206. help
  207. I2S data output gpio pin to use (not used mostly, leave it to -1).
  208. endmenu
  209. menu "I2C settings"
  210. config I2C_SDA
  211. int "I2C SDA GPIO number for DAC control"
  212. default -1
  213. help
  214. I2C data gpio pin to use with DAC (not used mostly, leave it to -1).
  215. config I2C_SCL
  216. int "I2C SCL GPIO number for DAC control"
  217. default -1
  218. help
  219. I2C clock gpio pin to use with DAC (not used mostly, leave it to -1).
  220. endmenu
  221. config MUTE_GPIO
  222. int "GPIO for muting DAC"
  223. default -1
  224. help
  225. GPIO used to mute DAC (not used mostly, leave it to -1).
  226. config MUTE_GPIO_LEVEL
  227. int "Mute GPIO active level"
  228. depends on MUTE_GPIO != -1
  229. default 1
  230. endmenu
  231. menu "SPDIF settings"
  232. visible if BASIC_I2C_BT
  233. config SDIF_NUM
  234. int "I2S channel for SDPIF (0 or 1)"
  235. default 0
  236. help
  237. I2S dma channel to use.
  238. config SPDIF_BCK_IO
  239. int "SDPIF Bit clock GPIO number"
  240. default I2S_BCK_IO
  241. help
  242. Must be set as SPDIF re-uses I2S but only needs DO (recommendation: set it to I2S Bit clock value)
  243. config SPDIF_WS_IO
  244. int "SPDIF Word Select GPIO number"
  245. default I2S_WS_IO
  246. help
  247. Must be set as SPDIF re-uses I2S but only needs DO (recommendation: set it to I2S Word select value)
  248. config SPDIF_DO_IO
  249. int "SPDIF Data I/O GPIO number"
  250. default -1
  251. help
  252. I2S data output IO use to simulate SPDIF
  253. endmenu
  254. menu "A2DP settings"
  255. config A2DP_SINK_NAME
  256. string "Name of Bluetooth A2DP device"
  257. default "SMSL BT4.2"
  258. help
  259. This is the name of the bluetooth speaker that Squeezelite will try connecting to.
  260. config A2DP_DEV_NAME
  261. string "Name of Squeezelite device to use when connecting to A2DP device"
  262. default "Squeezelite"
  263. help
  264. This is the name of the device that the Bluetooth speaker will see when it is connected to.
  265. config A2DP_CONTROL_DELAY_MS
  266. int "Control loop delay"
  267. default 500
  268. help
  269. Decreasing this will lead to a more responsive BT control, but might lead to noisy log files if debug is enabled.
  270. config A2DP_CONNECT_TIMEOUT_MS
  271. int "Time out duration when trying to connect to an A2DP audio sink"
  272. default 1000
  273. help
  274. Increasing this value will give more chance for less stable connections to be established.
  275. endmenu
  276. endmenu
  277. menu "Audio Input"
  278. config BT_SINK
  279. bool "Bluetooth receiver"
  280. default y
  281. help
  282. Enable bluetooth sink (Note that you obviously can't at the same time be a Bluetooth receiver and transmitter)
  283. config BT_NAME
  284. depends on BT_SINK
  285. string "Name of Bluetooth A2DP device"
  286. default "ESP32-BT"
  287. help
  288. This is the name of the bluetooth speaker that will be broadcasted
  289. config BT_SINK_PIN
  290. depends on BT_SINK
  291. int "Bluetooth PIN code"
  292. default 1234
  293. config AIRPLAY_SINK
  294. bool "AirPlay receiver"
  295. default y
  296. config AIRPLAY_NAME
  297. depends on AIRPLAY_SINK
  298. string "Name of AirPlay device"
  299. default "ESP32-AirPlay"
  300. help
  301. This is the name of the AirPlay speaker that will be broadcasted
  302. config AIRPLAY_PORT
  303. depends on AIRPLAY_SINK
  304. string "AirPlay listening port"
  305. default "5000"
  306. help
  307. AirPlay service listening port
  308. config CSPOT_SINK
  309. bool "Spotify (cspot) receiver"
  310. default y
  311. help
  312. Enable Spotify connect using CSpot
  313. endmenu
  314. menu "Controls"
  315. depends on !MUSE
  316. config AUDIO_CONTROLS
  317. string "Audio buttons set (JSON)"
  318. help
  319. Configuration of buttons (see README for syntax)
  320. endmenu
  321. menu "Display Screen"
  322. depends on !TWATCH2020
  323. config DISPLAY_CONFIG
  324. string "Screen configuraton"
  325. help
  326. Set parameters for display screen, leave empty for no screen
  327. I2C,driver=<model>,width=<pixels>,height=<pixels>[address=<i2c_address>][,HFlip][,VFlip][,rotate]
  328. SPI,driver=<model>,width=<pixels>,height=<pixels>,cs=<gpio>[,HFlip][,VFlip][,rotate]
  329. endmenu
  330. menu "Various I/O"
  331. visible if !TWATCH2020
  332. config I2C_CONFIG
  333. string "I2C system configuration"
  334. default ""
  335. help
  336. Set parameters of shared I2C interface
  337. sda=<gpio>,scl=<gpio>[,speed=<num>][,port=<0|1>]
  338. config SPI_CONFIG
  339. string "SPI system configuration"
  340. help
  341. Set parameters of shared SPI interface
  342. data=<gpio>,clk=<gpio>[,d/c=<num>][,host=<0|1|2>]
  343. config SET_GPIO
  344. string "Special GPIO configuration"
  345. help
  346. Set parameters of shared GPIO with special values.
  347. <gpio_1>=Vcc|GND|amp[:0|1]|jack[:0|1][ir][spkfault[:0|1][,<gpio_n>=Vcc|GND|amp[:0|1]|jack[:0|1]]
  348. 'amp' => GPIO that is set when playback starts
  349. 'jack' => GPIO used for audio jack detection
  350. 'green', 'red' => GPIO for status LED
  351. 'spkfault' => GPIO used for speaker fault detection
  352. 'ir' => GPIO used for Infrared Receiver
  353. [:0|1] means set the active value for that GPIO can be low or high
  354. config ROTARY_ENCODER
  355. string "Rotary Encoder configuration"
  356. default ""
  357. help
  358. Set GPIO for rotary encoder (quadrature phase). See README on SqueezeESP32 project's GitHub for more details
  359. A=<gpio>,B=<gpio>[,SW=gpio>[[,knobonly[=<ms>]|[,volume][,longpress]]
  360. config GPIO_EXP_CONFIG
  361. string "GPIO expander configuration"
  362. help
  363. Set parameters of GPIO extender
  364. model=<model>[,addr=<addr>][,base=<100..N>][,count=<0..32>][,intr=<gpio>][,port=dac|system]
  365. endmenu
  366. menu "LED configuration"
  367. visible if !SQUEEZEAMP && !TWATCH2020 && !MUSE
  368. config LED_GREEN_GPIO
  369. int "Green led GPIO"
  370. help
  371. Set to -1 for no LED
  372. config LED_GREEN_GPIO_LEVEL
  373. int "Green led ON level"
  374. depends on LED_GREEN_GPIO != -1
  375. config LED_RED_GPIO
  376. int "Red led GPIO"
  377. help
  378. Set to -1 for no LED
  379. config LED_RED_GPIO_LEVEL
  380. int "Red led ON level"
  381. depends on LED_RED_GPIO != -1
  382. default 0 if SQUEEZEAMP
  383. default 1
  384. endmenu
  385. menu "Audio JACK"
  386. visible if !TARGET_LOCKED
  387. config JACK_GPIO
  388. int "Jack insertion GPIO"
  389. help
  390. GPIO to detect speaker jack insertion. Set to -1 for no detection.
  391. config JACK_GPIO_LEVEL
  392. depends on JACK_GPIO != -1
  393. int "Level when inserted (0/1)"
  394. default 0
  395. endmenu
  396. menu "Amplifier"
  397. visible if !TARGET_LOCKED
  398. config AMP_GPIO
  399. int "Amplifier GPIO"
  400. help
  401. GPIO to switch on/off amplifier. Set to -1 for no amplifier.
  402. config AMP_GPIO_LEVEL
  403. depends on AMP_GPIO != -1
  404. int "Active level(0/1)"
  405. default 1
  406. endmenu
  407. menu "Speaker Fault"
  408. visible if !TARGET_LOCKED
  409. config SPKFAULT_GPIO
  410. int "Speaker fault GPIO"
  411. help
  412. GPIO to detect speaker fault condition. Set to -1 for no detection.
  413. config SPKFAULT_GPIO_LEVEL
  414. depends on SPKFAULT_GPIO != -1
  415. int "Level when fault (0/1)"
  416. default 0
  417. endmenu
  418. menu "Battery measure"
  419. visible if !TARGET_LOCKED
  420. config BAT_CONFIG
  421. string "Battery acquisition configuration"
  422. help
  423. Sets parameters for battery voltage measure
  424. channel=<0..7>,scale=<ratio_to_4096>,atten=<adc_atten>,cells=<1..3>
  425. endmenu
  426. config DEFAULT_COMMAND_LINE
  427. string "Default command line to execute"
  428. default "squeezelite -o I2S -b 500:2000 -d all=info -C 30"
  429. help
  430. This is the command to run when starting the device
  431. endmenu