squeezelite-esp32/components/wifi-manager/Kconfig.projbuild

menu "Wifi Manager Configuration"

config WIFI_MANAGER_TASK_PRIORITY
    int "RTOS Task Priority for the wifi_manager"
    default 1
    help
	Tasks spawn by the manager will have a priority of WIFI_MANAGER_TASK_PRIORITY-1. For this particular reason, minimum recommended task priority is 2.

config WIFI_MANAGER_MAX_RETRY
	int "Max Retry on failed connection"
    default 2
    help
	Defines when a connection is lost/attempt to connect is made, how many retries should be made before giving up.
	
config DEFAULT_AP_SSID
    string "Access Point SSID"
    default "esp32"
    help
	SSID (network name) the the esp32 will broadcast.

config DEFAULT_AP_PASSWORD
    string "Access Point Password"
    default "esp32pwd"
    help
	Password used for the Access Point. Leave empty and set AUTH MODE to WIFI_AUTH_OPEN for no password.

config DEFAULT_AP_CHANNEL
    int "Access Point WiFi Channel"
    default 1
    help
	Be careful you might not see the access point if you use a channel not allowed in your country.
	
config DEFAULT_AP_IP
    string "Access Point IP Address"
    default "10.10.0.1"
    help
	This is used for the redirection to the captive portal. It is recommended to leave unchanged.
	
config DEFAULT_AP_GATEWAY
    string "Access Point IP Gateway"
    default "10.10.0.1"
    help
	This is used for the redirection to the captive portal. It is recommended to leave unchanged.
	
config DEFAULT_AP_NETMASK
    string "Access Point Netmask"
    default "255.255.255.0"
    help
	This is used for the redirection to the captive portal. It is recommended to leave unchanged.
	
config DEFAULT_AP_MAX_CONNECTIONS
    int "Access Point Max Connections"
    default 4
    help
	Max is 4.
	
config DEFAULT_AP_BEACON_INTERVAL
    int "Access Point Beacon Interval (ms)"
    default 100
    help
	100ms is the recommended default.
config DEFAULT_COMMAND_LINE
    string "Default command line to execute"
    default "squeezelite -o I2S -b 500:2000 -d all=info -C 30"
    help
	This is the command to run when starting the device
endmenu