Sin descripción

philippe44 978afb363c full directory structure hace 6 años
components 978afb363c full directory structure hace 6 años
main 978afb363c full directory structure hace 6 años
.gitattributes a5b37a13c9 :confetti_ball: Added .gitattributes & .gitignore files hace 6 años
.gitignore a5b37a13c9 :confetti_ball: Added .gitattributes & .gitignore files hace 6 años
CMakeLists.txt 978afb363c full directory structure hace 6 años
Makefile 978afb363c full directory structure hace 6 años
README.md 978afb363c full directory structure hace 6 años

README.md

Adding squeezelite

  • libmad must be in a separated component otherwise linker whines about long call
  • libfaad requires -mlongcalls
  • set IDF_PATH=/home/esp-idf
  • set ESPPORT=COM9
  • change \components\partition_table\partitions_singleapp.csv to 2M instead of 1M (or more)
  • Wifi SCAN Example

    This example shows how to use scan of ESP32.

    We have two way to scan, fast scan and all channel scan:

    • fast scan: in this mode, scan will finish after find match AP even didn't scan all the channel, you can set thresholds for signal and authmode, it will ignore the AP which below the thresholds.

    • all channel scan : scan will end after checked all the channel, it will store four of the whole matched AP, you can set the sort method base on rssi or authmode, after scan, it will choose the best one

    and try to connect. Because it need malloc dynamic memory to store match AP, and most of cases is to connect to better signal AP, so it needn't record all the AP matched. The number of matches is limited to 4 in order to limit dynamic memory usage. Four matches allows APs with the same SSID name and all possible auth modes - Open, WEP, WPA and WPA2.