DalzenTwoBoard/dalzentwo_nrf9151_common.dtsi

/*
 * Copyright (c) 2023 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#include "dalzentwo_nrf9151_common-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "Lamox Dalzen Two NRF9151";
	compatible = "nordic,dalzentwo-nrf9151";

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-mcumgr = &uart0;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
			label = "Green LED 1";
		};
		led1: led_1 {
			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
			label = "Green LED 2";
		};
		led2: led_2 {
			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
			label = "Green LED 3";
		};
		led3: led_3 {
			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
			label = "Green LED 4";
		};
	};

	pwmleds {
		compatible = "pwm-leds";
		pwm_led0: pwm_led_0 {
			pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 1";
			zephyr,code = <INPUT_KEY_0>;
		};
		button1: button_1 {
			gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 2";
			zephyr,code = <INPUT_KEY_1>;
		};
		button2: button_2 {
			gpios = <&gpio0 18 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 3";
			zephyr,code = <INPUT_KEY_2>;
		};
		button3: button_3 {
			gpios = <&gpio0 19 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 4";
			zephyr,code = <INPUT_KEY_3>;
		};
	};

	nrf5340_reset: gpio-reset {
		compatible = "nordic,dalzentwo-nrf5340-reset";
		status = "disabled";
		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	};

	arduino_header: connector {
		compatible = "arduino-header-r3";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <0 0 &gpio0 14 0>,	/* A0 */
			   <1 0 &gpio0 15 0>,	/* A1 */
			   <2 0 &gpio0 16 0>,	/* A2 */
			   <3 0 &gpio0 17 0>,	/* A3 */
			   <4 0 &gpio0 18 0>,	/* A4 */
			   <5 0 &gpio0 19 0>,	/* A5 */
			   <6 0 &gpio0 0 0>,	/* D0 */
			   <7 0 &gpio0 1 0>,	/* D1 */
			   <8 0 &gpio0 2 0>,	/* D2 */
			   <9 0 &gpio0 3 0>,	/* D3 */
			   <10 0 &gpio0 4 0>,	/* D4 */
			   <11 0 &gpio0 5 0>,	/* D5 */
			   <12 0 &gpio0 6 0>,	/* D6 */
			   <13 0 &gpio0 7 0>,	/* D7 */
			   <14 0 &gpio0 8 0>,	/* D8 */
			   <15 0 &gpio0 9 0>,	/* D9 */
			   <16 0 &gpio0 10 0>,	/* D10 */
			   <17 0 &gpio0 11 0>,	/* D11 */
			   <18 0 &gpio0 12 0>,	/* D12 */
			   <19 0 &gpio0 13 0>,	/* D13 */
			   <20 0 &gpio0 30 0>,	/* D14 */
			   <21 0 &gpio0 31 0>;	/* D15 */
	};

	arduino_adc: analog-connector {
		compatible = "arduino,uno-adc";
		#io-channel-cells = <1>;
		io-channel-map = <0 &adc 1>,	/* A0 = P0.14 = AIN1 */
				 <1 &adc 2>,	/* A1 = P0.15 = AIN2 */
				 <2 &adc 3>,	/* A2 = P0.16 = AIN3 */
				 <3 &adc 4>,	/* A3 = P0.17 = AIN4 */
				 <4 &adc 5>,	/* A4 = P0.18 = AIN5 */
				 <5 &adc 6>;	/* A5 = P0.19 = AIN6 */
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		led2 = &led2;
		led3 = &led3;
		pwm-led0 = &pwm_led0;
		sw0 = &button0;
		sw1 = &button1;
		sw2 = &button2;
		sw3 = &button3;
		bootloader-led0 = &led0;
		mcuboot-button0 = &button0;
		mcuboot-led0 = &led0;
		watchdog0 = &wdt0;
	};
};

&adc {
	status = "okay";
};

&gpiote {
	status = "okay";
};

&gpio0 {
	status = "okay";
};

&uart0 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&uart0_default>;
	pinctrl-1 = <&uart0_sleep>;
	pinctrl-names = "default", "sleep";
};

arduino_serial: &uart1 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&uart1_default>;
	pinctrl-1 = <&uart1_sleep>;
	pinctrl-names = "default", "sleep";
};

arduino_i2c: &i2c2 {
	compatible = "nordic,nrf-twim";
	status = "okay";
	pinctrl-0 = <&i2c2_default>;
	pinctrl-1 = <&i2c2_sleep>;
	pinctrl-names = "default", "sleep";
	clock-frequency = <I2C_BITRATE_FAST>;

	pcal6408a: pcal6408a@21 {
		compatible = "nxp,pcal6408a";
		status = "disabled";
		reg = <0x21>;
		gpio-controller;
		#gpio-cells = <2>;
		ngpios = <8>;
		int-gpios = <&gpio0 19 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
	};
};

&pwm0 {
	status = "okay";
	pinctrl-0 = <&pwm0_default>;
	pinctrl-1 = <&pwm0_sleep>;
	pinctrl-names = "default", "sleep";
};

arduino_spi: &spi3 {
	compatible = "nordic,nrf-spim";
	status = "okay";
	cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>, /* D10 */
		   <&gpio0 20 GPIO_ACTIVE_LOW>;
	pinctrl-0 = <&spi3_default>;
	pinctrl-1 = <&spi3_sleep>;
	pinctrl-names = "default", "sleep";

	gd25wb256: gd25wb256e3ir@1 {
		compatible = "jedec,spi-nor";
		status = "disabled";
		reg = <1>;
		spi-max-frequency = <8000000>;
		size = <268435456>;
		has-dpd;
		t-enter-dpd = <3000>;
		t-exit-dpd = <40000>;
		sfdp-bfp = [
			e5 20 f3 ff  ff ff ff 0f  44 eb 08 6b  08 3b 42 bb
			ee ff ff ff  ff ff 00 ff  ff ff 00 ff  0c 20 0f 52
			10 d8 00 ff  44 7a c9 fe  83 67 26 62  ec 82 18 44
			7a 75 7a 75  04 c4 d5 5c  00 06 74 00  08 50 00 01
			];
		jedec-id = [c8 65 19];
	};
};

/* Include default memory partition configuration file */
#include <common/nordic/nrf91xx_partition.dtsi>