Detect DynaPORT on SCSI bus on boot

For some reason the LED needs to be disabled for the DynaPORT to be
detected once Mac OS boots.

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform_gpio_Pico.h

@@ -71,8 +71,13 @@
 
 // Status LED pins
 #define LED_PIN      16
-#define LED_ON()     sio_hw->gpio_set = 1 << LED_PIN
-#define LED_OFF()    sio_hw->gpio_clr = 1 << LED_PIN
+#ifdef ZULUSCSI_DAYNAPORT // disable LEDs, workaround to boot correctly
+# define LED_ON()    (void)0
+# define LED_OFF()   (void)0
+#else
+# define LED_ON()    sio_hw->gpio_set = 1 << LED_PIN
+# define LED_OFF()   sio_hw->gpio_clr = 1 << LED_PIN
+#endif
 
 // SD card pins in SDIO mode
 #define SDIO_CLK 10

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform_network.cpp

@@ -84,6 +84,7 @@ int platform_network_init(char *mac)
 		memcpy(scsiDev.boardCfg.wifiMACAddress, mac, sizeof(scsiDev.boardCfg.wifiMACAddress));
 	}
 
+	cyw43_init(&cyw43_state);
 	// setting the MAC requires libpico to be compiled with CYW43_USE_OTP_MAC=0
 	memcpy(cyw43_state.mac, mac, sizeof(cyw43_state.mac));
 	cyw43_arch_enable_sta_mode();

platformio.ini

@@ -122,7 +122,6 @@ build_flags =
     -DHAS_SDIO_CLASS
     -DUSE_ARDUINO=1
     -DZULUSCSI_PICO
-    -DDISABLE_SWO
 
 [env:ZuluSCSI_Pico_Net_DaynaPORT]
 platform = https://github.com/maxgerhardt/platform-raspberrypi.git