|
|
@@ -138,7 +138,7 @@ You may also flash the `.bin` file directly from STM32CubeProgrammer. If you are
|
|
|
1. Remove SD Card
|
|
|
2. Make sure the STLink is up to date - https://my.st.com/content/my_st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-link007.license=1610785194992.product=STSW-LINK007.version=2.37.26.html[Latest Firmware]
|
|
|
3. Connect pins `SWDIO`(2), `GND`(4), `SWCLK`(6), and `3.3v`(8) from the programmer to the Blue Pill. NOTE: These are not the same as Serial ports.
|
|
|
-4. Using Arduino Studio Select Tools -> Upload Method -> STLink.
|
|
|
+4. Run the PlatformIO: Upload task.
|
|
|
5. You should see the LED `PC_13` flashing indicating no SD Card detected.
|
|
|
6. Insert SD Card, boot on your favorite Mac!
|
|
|
|
Eric Helgeson