|
@@ -16,7 +16,7 @@ The community has created a few assembly videos:
|
|
|
1. Solder on the surface mount SD Card holder. Use the [Drag Solder](https://youtu.be/Z_KL4fWOMug) technique.
|
|
1. Solder on the surface mount SD Card holder. Use the [Drag Solder](https://youtu.be/Z_KL4fWOMug) technique.
|
|
|
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
|
|
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
|
|
|
- Ensure the SD card fits and you dont have too much solder on the sides or contacts
|
|
- Ensure the SD card fits and you dont have too much solder on the sides or contacts
|
|
|
-2. Solder the dioeds to the **bottom** of the board. Be sure they are flush as possible to the bottom.
|
|
|
|
|
|
|
+2. Solder the diodes to the **bottom** of the board. Be sure they are flush as possible to the bottom.
|
|
|
|
|
|
|
|
3. Solder the header pins on to the BluePill. Then BluePill pill to the BlueSCSI PCB.
|
|
3. Solder the header pins on to the BluePill. Then BluePill pill to the BlueSCSI PCB.
|
|
|
- Correct orientation is having the USB connector of the BluePill should be over the SD Card holder.
|
|
- Correct orientation is having the USB connector of the BluePill should be over the SD Card holder.
|
TomRBarber