|
|
@@ -1,58 +1,3 @@
|
|
|
+See
|
|
|
|
|
|
-[SCSI]
|
|
|
-# Settings that apply to all SCSI ids
|
|
|
-
|
|
|
-# Select a system preset to apply default settings
|
|
|
-# Known systems: "Generic", "MacPlus", "MegaSTE"
|
|
|
-#System="MacPlus"
|
|
|
-
|
|
|
-#Debug = 0 # Same effect as DIPSW2, enables verbose log messages
|
|
|
-#SelectionDelay = 255 # Millisecond delay after selection, 255 = automatic, 0 = no delay
|
|
|
-#PhyMode = 0 # 0: Best available 1: PIO 2: DMA_TIMER 3: GREENPAK_PIO 4: GREENPAK_DMA
|
|
|
-#Dir = "/" # Optionally look for image files in subdirectory
|
|
|
-#Dir2 = "/images" # Multiple directories can be specified Dir1...Dir9
|
|
|
-#DisableStatusLED 1 # 0: Use status LED, 1: Disable status LED
|
|
|
-
|
|
|
-# Settings that can be needed for compatibility with some hosts
|
|
|
-#Quirks = 0 # 0: Standard, 1: Apple, 2: OMTI, 4: Xebec, 8: VMS
|
|
|
-#EnableUnitAttention = 0 # Post UNIT_ATTENTION status on power-on or SD card hotplug
|
|
|
-#EnableSCSI2 = 1 # Enable faster speeds of SCSI2
|
|
|
-#EnableSelLatch = 0 # For Philips P2000C and other devices that release SEL signal before BSY
|
|
|
-#EnableParity = 1 # Enable parity checks on platforms that support it (RP2040)
|
|
|
-#MapLunsToIDs = 0 # For Philips P2000C simulate multiple LUNs
|
|
|
-#MaxSyncSpeed = 10 # Set to 5 or 10 to enable synchronous SCSI mode, 0 to disable
|
|
|
-
|
|
|
-# ROM settings
|
|
|
-#DisableROMDrive = 1 # Disable the ROM drive if it has been loaded to flash
|
|
|
-#ROMDriveSCSIID = 7 # Override ROM drive's SCSI ID
|
|
|
-
|
|
|
-# Settings that can be specified either per-device or for all devices.
|
|
|
-#Vendor = "QUANTUM"
|
|
|
-#Product = "FIREBALL1"
|
|
|
-#Version = "1.0"
|
|
|
-#Serial = "0123456789ABCDEF"
|
|
|
-#Type = 0 # 0: Fixed, 1: Removable, 2: Optical, 3: Floppy, 4: Mag-optical, 5: Tape
|
|
|
-#TypeModifier = 0 # Affects only INQUIRY response
|
|
|
-#SectorsPerTrack = 63
|
|
|
-#HeadsPerCylinder = 255
|
|
|
-#RightAlignStrings = 0 # Right-align SCSI vendor / product strings, defaults on if Quirks = 1
|
|
|
-#PrefetchBytes = 8192 # Maximum number of bytes to prefetch after a read request, 0 to disable
|
|
|
-#ReinsertCDOnInquiry = 1 # Reinsert any ejected CD-ROM image on Inquiry command, 1 to enable
|
|
|
-
|
|
|
-# Settings can be overridden for individual devices.
|
|
|
-#[SCSI2]
|
|
|
-#Product = "Disk with ID2"
|
|
|
-
|
|
|
-#[SCSI5]
|
|
|
-#Product = "CD-ROM Drive"
|
|
|
-#Type = 2
|
|
|
-
|
|
|
-# If IMG0..IMG9 are specified, they are cycled after each CD eject command.
|
|
|
-#IMG0 = FirstCD.iso
|
|
|
-#IMG1 = SecondCD.iso
|
|
|
-
|
|
|
-# Raw sector range from SD card can be passed through
|
|
|
-# Format is RAW:first_sector:last_sector where sector numbers can be decimal or hex.
|
|
|
-# If end sector is beyond end of SD card, it will be adjusted automatically.
|
|
|
-# [SCSI4]
|
|
|
-# IMG0 = RAW:0x00000000:0xFFFFFFFF # Whole SD card
|
|
|
+https://github.com/BlueSCSI/BlueSCSI-v2/wiki/bluescsi.ini
|
Eric Helgeson