|
@@ -3,7 +3,8 @@ ZuluSCSI Firmware
|
|
|
|
|
|
|
|
Hard Drive & ISO image files
|
|
Hard Drive & ISO image files
|
|
|
---------------------
|
|
---------------------
|
|
|
-ZuluSCSI uses raw hard drive image files, the same as used with RaSCSI and BlueSCSI. These are often referred to as "hda" files.
|
|
|
|
|
|
|
+ZuluSCSI uses raw hard drive image files, which are stored on a FAT32 or exFAT-formatted SD card. These are often referred to as "hda" files.
|
|
|
|
|
+
|
|
|
Examples of valid filenames:
|
|
Examples of valid filenames:
|
|
|
* `HD5.hda` or `HD5.img`: hard drive with SCSI ID 5
|
|
* `HD5.hda` or `HD5.img`: hard drive with SCSI ID 5
|
|
|
* `HD20_512.hda`: hard drive with SCSI ID 2, LUN 0, block size 512
|
|
* `HD20_512.hda`: hard drive with SCSI ID 2, LUN 0, block size 512
|
|
@@ -13,7 +14,7 @@ In addition to the simplified filenames style above, the ZuluSCSI firmware also
|
|
|
|
|
|
|
|
Log files and error indications
|
|
Log files and error indications
|
|
|
-------------------------------
|
|
-------------------------------
|
|
|
-Log messages are stored in `Zululog.txt`, which is cleared on every boot.
|
|
|
|
|
|
|
+Log messages are stored in `zlulog.txt`, which is cleared on every boot.
|
|
|
Normally only basic initialization information is stored, but switching the `DBG` DIP switch on will cause every SCSI command to be logged, once the board is power cycled.
|
|
Normally only basic initialization information is stored, but switching the `DBG` DIP switch on will cause every SCSI command to be logged, once the board is power cycled.
|
|
|
|
|
|
|
|
The indicator LED will normally report disk access.
|
|
The indicator LED will normally report disk access.
|
Alex Perez