|
@@ -107,8 +107,8 @@ For ZuluSCSI V1.1, the DIP switch settings are as follows:
|
|
|
For ZuluSCSI V1.2, the DIP switch settings at SW301 are as follows:
|
|
For ZuluSCSI V1.2, the DIP switch settings at SW301 are as follows:
|
|
|
|
|
|
|
|
- TERM: Enable SCSI termination
|
|
- TERM: Enable SCSI termination
|
|
|
-- DEBUG: Enable verbose debug logging via USB serial console
|
|
|
|
|
-- DIRECT/RAW: when in the factory-default OFF position
|
|
|
|
|
|
|
+- DEBUG: Enable verbose debug logging via USB serial console.
|
|
|
|
|
+- DIRECT/RAW: when in the factory-default OFF position, the entirety of the SD card is exposed as a single block device, and the device type is defined by the setting of the rotary DIP switch at SW404.
|
|
|
- QUIRKS: Enables/disables Macintosh/Apple specific mode-pages and device strings, which eases disk initialization when performing fresh installs on legacy Macintosh computers.
|
|
- QUIRKS: Enables/disables Macintosh/Apple specific mode-pages and device strings, which eases disk initialization when performing fresh installs on legacy Macintosh computers.
|
|
|
|
|
|
|
|
ZuluSCSI Mini has no DIP switches, so all optional configuration parameters must be defined in zuluscsi.ini
|
|
ZuluSCSI Mini has no DIP switches, so all optional configuration parameters must be defined in zuluscsi.ini
|
Alex Perez