Merge pull request #318 from ZuluSCSI/pico-daynaport

ZuluSCSI Pico - SCSI DaynaPORT Ethernet (Wi-Fi) emulation support, by @jcs

lib/SCSI2SD/include/scsi2sd.h

@@ -1,4 +1,5 @@
 //	Copyright (C) 2014 Michael McMaster <michael@codesrc.com>
+//	Copyright (c) 2023 joshua stein <jcs@jcs.org>
 //
 //	This file is part of SCSI2SD.
 //
@@ -14,6 +15,8 @@
 //
 //	You should have received a copy of the GNU General Public License
 //	along with SCSI2SD.  If not, see <http://www.gnu.org/licenses/>.
+
+
 #ifndef scsi2sd_h
 #define scsi2sd_h
 
@@ -73,7 +76,8 @@ typedef enum
 	S2S_CFG_OPTICAL,
 	S2S_CFG_FLOPPY_14MB,
 	S2S_CFG_MO,
-	S2S_CFG_SEQUENTIAL
+	S2S_CFG_SEQUENTIAL,
+	S2S_CFG_NETWORK,
 
 } S2S_CFG_TYPE;
 
@@ -140,7 +144,11 @@ typedef struct __attribute__((packed))
 
 	uint8_t scsiSpeed;
 
-	uint8_t reserved[119]; // Pad out to 128 bytes
+	char wifiMACAddress[6];
+	char wifiSSID[32];
+	char wifiPassword[63];
+
+	uint8_t reserved[18]; // Pad out to 128 bytes
 } S2S_BoardCfg;
 
 typedef enum

lib/SCSI2SD/src/firmware/config.h

@@ -1,4 +1,5 @@
 //	Copyright (C) 2013 Michael McMaster <michael@codesrc.com>
+//	Copyright (c) 2023 joshua stein <jcs@jcs.org>
 //
 //	This file is part of SCSI2SD.
 //
@@ -14,10 +15,13 @@
 //
 //	You should have received a copy of the GNU General Public License
 //	along with SCSI2SD.  If not, see <http://www.gnu.org/licenses/>.
+
+
 #ifndef S2S_Config_H
 #define S2S_Config_H
 
 #include "scsi2sd.h"
+#include "log.h"
 
 void s2s_configInit(S2S_BoardCfg* config);
 void s2s_debugInit(void);

lib/SCSI2SD/src/firmware/inquiry.c

@@ -1,5 +1,6 @@
 //	Copyright (C) 2013 Michael McMaster <michael@codesrc.com>
 //	Copyright (C) 2019 Landon Rodgers  <g.landon.rodgers@gmail.com>
+//	Copyright (c) 2023 joshua stein <jcs@jcs.org>
 //
 //	This file is part of SCSI2SD.
 //
@@ -15,6 +16,9 @@
 //
 //	You should have received a copy of the GNU General Public License
 //	along with SCSI2SD.  If not, see <http://www.gnu.org/licenses/>.
+//
+// This work incorporates work from the following
+
 
 #include "scsi.h"
 #include "config.h"
@@ -201,6 +205,11 @@ void s2s_scsiInquiry()
 		case S2S_CFG_REMOVABLE:
 			scsiDev.data[1] |= 0x80; // Removable bit.
 			break;
+
+		case S2S_CFG_NETWORK:
+			scsiDev.data[2] = 0x01;  // Page code.
+			break;
+		
 		default:
 			// Accept defaults for a fixed disk.
 			break;
@@ -264,6 +273,11 @@ uint8_t getDeviceTypeQualifier()
 		return 0;
 		break;
 
+	case S2S_CFG_NETWORK:
+		// processor device
+		return 0x03;
+		break;
+
 	default:
 		// Accept defaults for a fixed disk.
 		return 0;

lib/SCSI2SD/src/firmware/log.h

@@ -0,0 +1,27 @@
+//	Copyright (C) 2023 joshua stein <jcs@jcs.org>
+//
+//	This file is part of SCSI2SD.
+//
+//	SCSI2SD is free software: you can redistribute it and/or modify
+//	it under the terms of the GNU General Public License as published by
+//	the Free Software Foundation, either version 3 of the License, or
+//	(at your option) any later version.
+//
+//	SCSI2SD is distributed in the hope that it will be useful,
+//	but WITHOUT ANY WARRANTY; without even the implied warranty of
+//	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//	GNU General Public License for more details.
+//
+//	You should have received a copy of the GNU General Public License
+//	along with SCSI2SD.  If not, see <http://www.gnu.org/licenses/>.
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void logmsg_buf(const unsigned char *buf, unsigned long size);
+extern void logmsg_f(const char *format, ...);
+
+#ifdef __cplusplus
+}
+#endif

lib/SCSI2SD/src/firmware/network.c

@@ -0,0 +1,485 @@
+/*
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifdef ZULUSCSI_NETWORK
+#include <string.h>
+#include "scsi.h"
+#include "scsi2sd_time.h"
+#include "scsiPhy.h"
+#include "config.h"
+#include "network.h"
+
+extern bool g_log_debug;
+
+static bool scsiNetworkEnabled = false;
+
+static uint8_t scsiNetworkPacketsInbound[NETWORK_PACKET_QUEUE_SIZE][NETWORK_PACKET_MAX_SIZE];
+static uint16_t scsiNetworkPacketInboundSizes[NETWORK_PACKET_QUEUE_SIZE];
+static uint8_t scsiNetworkPacketInboundWriteIndex = 0;
+static uint8_t scsiNetworkPacketInboundReadIndex = 0;
+
+static uint8_t scsiNetworkPacketsOutbound[NETWORK_PACKET_QUEUE_SIZE][NETWORK_PACKET_MAX_SIZE];
+static uint16_t scsiNetworkPacketOutboundSizes[NETWORK_PACKET_QUEUE_SIZE];
+static uint8_t scsiNetworkPacketOutboundWriteIndex = 0;
+static uint8_t scsiNetworkPacketOutboundReadIndex = 0;
+
+static const uint32_t crc32_tab[] = {
+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+	0xe963a535, 0x9e6495a3,	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+	0xf3b97148, 0x84be41de,	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,	0x14015c4f, 0x63066cd9,
+	0xfa0f3d63, 0x8d080df5,	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,	0x35b5a8fa, 0x42b2986c,
+	0xdbbbc9d6, 0xacbcf940,	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+	0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,	0x76dc4190, 0x01db7106,
+	0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+	0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+	0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+	0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+	0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+	0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+	0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+	0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+	0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+	0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+	0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+	0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+	0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+	0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+	0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+	0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+uint32_t crc32(const void *buf, size_t size)
+{
+	const uint8_t *p = buf;
+	uint32_t crc;
+
+	crc = ~0U;
+	while (size--)
+		crc = crc32_tab[(crc ^ *p++) & 0xFF] ^ (crc >> 8);
+	return crc ^ ~0U;
+}
+
+int scsiNetworkCommand()
+{
+	int handled = 1;
+	int off = 0;
+	int parityError = 0;
+	long psize;
+	uint32_t size = scsiDev.cdb[4] + (scsiDev.cdb[3] << 8);
+	uint8_t command = scsiDev.cdb[0];
+	uint8_t cont = (scsiDev.cdb[5] == 0x80);
+
+	if (g_log_debug)
+	{
+		logmsg_f("in scsiNetworkCommand with command 0x%02x (size %d)", command, size);
+	}
+
+	switch (command) {
+	case 0x08:
+		// read(6)
+		if (unlikely(size == 1))
+		{
+			scsiDev.status = CHECK_CONDITION;
+			scsiDev.phase = STATUS;
+			break;
+		}
+
+		if (scsiNetworkPacketInboundReadIndex == scsiNetworkPacketInboundWriteIndex)
+		{
+			// nothing available
+			memset(scsiDev.data, 0, 6);
+			scsiDev.dataLen = 6;
+		}
+		else
+		{
+			psize = scsiNetworkPacketInboundSizes[scsiNetworkPacketInboundReadIndex];
+
+			// pad smaller packets
+			if (psize < 64)
+			{
+				psize = 64;
+			}
+			else if (psize + 6 > size)
+			{
+				logmsg_f("%s: packet size too big (%d)", __func__, psize);
+				psize = size - 6;
+			}
+
+			if (g_log_debug)
+			{
+				logmsg_f("%s: sending packet[%d] to host of size %zu + 6", __func__, scsiNetworkPacketInboundReadIndex, psize);
+			}
+
+			scsiDev.dataLen = psize + 6; // 2-byte length + 4-byte flag + packet
+			memcpy(scsiDev.data + 6, scsiNetworkPacketsInbound[scsiNetworkPacketInboundReadIndex], psize);
+			scsiDev.data[0] = (psize >> 8) & 0xff;
+			scsiDev.data[1] = psize & 0xff;
+
+			if (scsiNetworkPacketInboundReadIndex == NETWORK_PACKET_QUEUE_SIZE - 1)
+				scsiNetworkPacketInboundReadIndex = 0;
+			else
+				scsiNetworkPacketInboundReadIndex++;
+
+			// flags
+			scsiDev.data[2] = 0;
+			scsiDev.data[3] = 0;
+			scsiDev.data[4] = 0;
+			// more data to read?
+			scsiDev.data[5] = (scsiNetworkPacketInboundReadIndex == scsiNetworkPacketInboundWriteIndex ? 0 : 0x10);
+
+			if (g_log_debug)
+			{
+				logmsg_buf(scsiDev.data, scsiDev.dataLen);
+			}
+		}
+
+		// DaynaPort driver needs a delay between reading the initial packet size and the data so manually do two transfers
+		scsiEnterPhase(DATA_IN);
+		scsiWrite(scsiDev.data, 6);
+		while (!scsiIsWriteFinished(NULL))
+		{
+			platform_poll();
+		}
+		scsiFinishWrite();
+
+		if (scsiDev.dataLen > 6)
+		{
+			s2s_delay_us(80);
+
+			scsiWrite(scsiDev.data + 6, scsiDev.dataLen - 6);
+			while (!scsiIsWriteFinished(NULL))
+			{
+				platform_poll();
+			}
+			scsiFinishWrite();
+		}
+
+		scsiDev.status = GOOD;
+		scsiDev.phase = STATUS;
+		break;
+
+	case 0x09:
+		// read mac address and stats
+		memcpy(scsiDev.data, scsiDev.boardCfg.wifiMACAddress, sizeof(scsiDev.boardCfg.wifiMACAddress));
+		memset(scsiDev.data + sizeof(scsiDev.boardCfg.wifiMACAddress), 0, sizeof(scsiDev.data) - sizeof(scsiDev.boardCfg.wifiMACAddress));
+
+		// three 32-bit counters expected to follow, just return zero for all
+		scsiDev.dataLen = 18;
+		scsiDev.phase = DATA_IN;
+		break;
+
+	case 0x0a:
+		// write(6)
+		off = 0;
+		if (cont)
+		{
+			size += 8;
+		}
+
+		memset(scsiDev.data, 0, sizeof(scsiDev.data));
+
+		scsiEnterPhase(DATA_OUT);
+		parityError = 0;
+		scsiRead(scsiDev.data, size, &parityError);
+
+		if (g_log_debug)
+		{
+			logmsg_f("%s: read packet from host of size %zu - %d (parity error %d)", __func__, size, (cont ? 4 : 0), parityError);
+			logmsg_buf(scsiDev.data, size);
+		}
+
+		if (cont)
+		{
+			size = (scsiDev.data[0] << 8) | scsiDev.data[1];
+			off = 4;
+		}
+
+		memcpy(&scsiNetworkPacketsOutbound[scsiNetworkPacketOutboundWriteIndex], scsiDev.data + off, size);
+		scsiNetworkPacketOutboundSizes[scsiNetworkPacketOutboundWriteIndex] = size;
+
+		if (scsiNetworkPacketOutboundWriteIndex == NETWORK_PACKET_QUEUE_SIZE - 1)
+			scsiNetworkPacketOutboundWriteIndex = 0;
+		else
+			scsiNetworkPacketOutboundWriteIndex++;
+
+		scsiDev.status = GOOD;
+		scsiDev.phase = STATUS;
+		break;
+
+	case 0x0c:
+		// set interface mode (ignored)
+		//broadcasts = (scsiDev.cdb[4] == 0x04);
+		break;
+
+	case 0x0d:
+		// add multicast addr to network filter
+		memset(scsiDev.data, 0, sizeof(scsiDev.data));
+		scsiEnterPhase(DATA_OUT);
+		parityError = 0;
+		scsiRead(scsiDev.data, size, &parityError);
+
+		if (g_log_debug)
+		{
+			logmsg_f("%s: adding multicast address %02x:%02x:%02x:%02x:%02x:%02x", __func__,
+			  scsiDev.data[0], scsiDev.data[1], scsiDev.data[2], scsiDev.data[3], scsiDev.data[4], scsiDev.data[5]);
+		}
+
+		platform_network_add_multicast_address(scsiDev.data);
+
+		scsiDev.status = GOOD;
+		scsiDev.phase = STATUS;
+		break;
+
+	case 0x0e:
+		// toggle interface
+		if (scsiDev.cdb[5] & 0x80)
+		{
+			if (g_log_debug)
+			{
+				logmsg_f("%s: enable interface", __func__);
+			}
+			scsiNetworkEnabled = true;
+			scsiNetworkPacketInboundWriteIndex = 0;
+			scsiNetworkPacketInboundReadIndex = 0;
+			scsiNetworkPacketOutboundWriteIndex = 0;
+			scsiNetworkPacketOutboundReadIndex = 0;
+		}
+		else
+		{
+			if (g_log_debug)
+			{
+				logmsg_f("%s: disable interface", __func__);
+			}
+			scsiNetworkEnabled = false;
+		}
+		break;
+
+	case 0x1a:
+		// mode sense (ignored)
+		break;
+
+	case 0x40:
+		// set MAC (ignored)
+		scsiDev.dataLen = 6;
+		scsiDev.phase = DATA_OUT;
+		break;
+
+	case 0x80:
+		// set mode (ignored)
+		break;
+	
+	// custom wifi commands all using the same opcode, with a sub-command in cdb[2]
+	case SCSI_NETWORK_WIFI_CMD:
+		if (g_log_debug)
+		{
+			logmsg_f("in scsiNetworkCommand with wi-fi command 0x%02x (size %d)", scsiDev.cdb[2], size);
+		}
+
+		switch (scsiDev.cdb[2]) {
+		case SCSI_NETWORK_WIFI_CMD_SCAN:
+			// initiate wi-fi scan
+			scsiDev.dataLen = 1;
+			int ret = platform_network_wifi_start_scan();
+			scsiDev.data[0] = (ret < 0 ? ret : 1);
+			scsiDev.phase = DATA_IN;
+			break;
+
+		case SCSI_NETWORK_WIFI_CMD_COMPLETE:
+			// check for wi-fi scan completion
+			scsiDev.dataLen = 1;
+			scsiDev.data[0] = (platform_network_wifi_scan_finished() ? 1 : 0);
+			scsiDev.phase = DATA_IN;
+			break;
+
+		case SCSI_NETWORK_WIFI_CMD_SCAN_RESULTS:
+			// return wi-fi scan results
+			if (!platform_network_wifi_scan_finished())
+			{
+				scsiDev.status = CHECK_CONDITION;
+				scsiDev.phase = STATUS;
+				break;
+			}
+
+			int nets = 0;
+			for (int i = 0; i < WIFI_NETWORK_LIST_ENTRY_COUNT; i++)
+			{
+				if (wifi_network_list[i].ssid[0] == '\0')
+					break;
+				nets++;
+			}
+
+			if (nets) {
+				int size = sizeof(struct wifi_network_entry) * nets;
+				if (size + 2 > sizeof(scsiDev.data))
+				{
+					logmsg_f("WARNING: wifi_network_list is bigger than scsiDev.data, truncating");
+					size = sizeof(scsiDev.data) - 2;
+					size -= (size % (sizeof(struct wifi_network_entry)));
+				}
+				scsiDev.data[0] = (size >> 8) & 0xff;
+				scsiDev.data[1] = size & 0xff;
+				memcpy(scsiDev.data + 2, wifi_network_list, size);
+				scsiDev.dataLen = size + 2;
+			}
+			else
+			{
+				scsiDev.data[0] = 0;
+				scsiDev.data[1] = 0;
+				scsiDev.dataLen = 2;
+			}
+
+			scsiDev.phase = DATA_IN;
+			break;
+
+		case SCSI_NETWORK_WIFI_CMD_INFO: {
+			// return current wi-fi information
+			struct wifi_network_entry wifi_cur = { 0 };
+			int size = sizeof(wifi_cur);
+
+			char *ssid = platform_network_wifi_ssid();
+			if (ssid != NULL)
+				strlcpy(wifi_cur.ssid, ssid, sizeof(wifi_cur.ssid));
+
+			char *bssid = platform_network_wifi_bssid();
+			if (bssid != NULL)
+				memcpy(wifi_cur.bssid, bssid, sizeof(wifi_cur.bssid));
+
+			wifi_cur.rssi = platform_network_wifi_rssi();
+
+			wifi_cur.channel = platform_network_wifi_channel();
+
+			scsiDev.data[0] = (size >> 8) & 0xff;
+			scsiDev.data[1] = size & 0xff;
+			memcpy(scsiDev.data + 2, (char *)&wifi_cur, size);
+			scsiDev.dataLen = size + 2;
+			scsiDev.phase = DATA_IN;
+			break;
+		}
+
+		case SCSI_NETWORK_WIFI_CMD_JOIN: {
+			// set current wi-fi network
+			struct wifi_join_request req = { 0 };
+
+			if (size != sizeof(req)) {
+				logmsg_f("wifi_join_request bad size (%zu != %zu), ignoring", size, sizeof(req));
+				scsiDev.status = CHECK_CONDITION;
+				scsiDev.phase = STATUS;
+				break;
+			}
+
+			scsiEnterPhase(DATA_OUT);
+			parityError = 0;
+			scsiRead((uint8_t *)&req, sizeof(req), &parityError);
+
+			if (g_log_debug)
+			{
+				logmsg_f("%s: read join request from host:", __func__);
+				logmsg_buf(scsiDev.data, size);
+			}
+
+			platform_network_wifi_join(req.ssid, req.key);
+
+			scsiDev.status = GOOD;
+			scsiDev.phase = STATUS;
+			break;
+		}
+		}
+		break;
+
+	default:
+		handled = 0;
+	}
+	return handled;
+}
+
+int scsiNetworkEnqueue(const uint8_t *buf, size_t len)
+{
+	if (!scsiNetworkEnabled)
+		return 0;
+
+	if (len + 4 > sizeof(scsiNetworkPacketsInbound[0]))
+	{
+		if (g_log_debug)
+			logmsg_f("%s: dropping incoming network packet, too large (%zu > %zu)", __func__, len, sizeof(scsiNetworkPacketsInbound[0]));
+		return 0;
+	}
+
+	memcpy(scsiNetworkPacketsInbound[scsiNetworkPacketInboundWriteIndex], buf, len);
+	uint32_t crc = crc32(buf, len);
+	scsiNetworkPacketsInbound[scsiNetworkPacketInboundWriteIndex][len] = crc & 0xff;
+	scsiNetworkPacketsInbound[scsiNetworkPacketInboundWriteIndex][len + 1] = (crc >> 8) & 0xff;
+	scsiNetworkPacketsInbound[scsiNetworkPacketInboundWriteIndex][len + 2] = (crc >> 16) & 0xff;
+	scsiNetworkPacketsInbound[scsiNetworkPacketInboundWriteIndex][len + 3] = (crc >> 24) & 0xff;
+
+	scsiNetworkPacketInboundSizes[scsiNetworkPacketInboundWriteIndex] = len + 4;
+
+	if (scsiNetworkPacketInboundWriteIndex == NETWORK_PACKET_QUEUE_SIZE - 1)
+		scsiNetworkPacketInboundWriteIndex = 0;
+	else
+		scsiNetworkPacketInboundWriteIndex++;
+
+	if (scsiNetworkPacketInboundWriteIndex == scsiNetworkPacketInboundReadIndex)
+	{
+		if (g_log_debug)
+			logmsg_f("%s: dropping packets in ring, write index caught up to read index", __func__);
+	}
+	
+	return 1;
+}
+
+int scsiNetworkPurge(void)
+{
+	int sent = 0;
+
+	if (!scsiNetworkEnabled)
+		return 0;
+
+	while (scsiNetworkPacketOutboundReadIndex != scsiNetworkPacketOutboundWriteIndex)
+	{
+		platform_network_send(scsiNetworkPacketsOutbound[scsiNetworkPacketOutboundReadIndex], scsiNetworkPacketOutboundSizes[scsiNetworkPacketOutboundReadIndex]);
+
+		if (scsiNetworkPacketOutboundReadIndex == NETWORK_PACKET_QUEUE_SIZE - 1)
+			scsiNetworkPacketOutboundReadIndex = 0;
+		else
+			scsiNetworkPacketOutboundReadIndex++;
+		
+		sent++;
+	}
+
+	return sent;
+}
+#endif // ZULUSCSI_NETWORK

lib/SCSI2SD/src/firmware/network.h

@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef NETWORK_H
+#define NETWORK_H
+#ifdef ZULUSCSI_NETWORK
+#include <sys/types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define SCSI_NETWORK_WIFI_CMD				0x1c	// cdb opcode
+#define SCSI_NETWORK_WIFI_CMD_SCAN			0x01	// cdb[2]
+#define SCSI_NETWORK_WIFI_CMD_COMPLETE		0x02
+#define SCSI_NETWORK_WIFI_CMD_SCAN_RESULTS	0x03
+#define SCSI_NETWORK_WIFI_CMD_INFO			0x04
+#define SCSI_NETWORK_WIFI_CMD_JOIN			0x05
+
+#ifndef NETWORK_PACKET_QUEUE_SIZE
+# define NETWORK_PACKET_QUEUE_SIZE   20		// must be <= 255
+#endif
+
+#define NETWORK_PACKET_MAX_SIZE     1520
+
+int scsiNetworkCommand(void);
+int scsiNetworkEnqueue(const uint8_t *buf, size_t len);
+int scsiNetworkPurge(void);
+
+#ifdef __cplusplus
+}
+#endif
+#endif // ZULUSCSI_NETWORK
+#endif // NETWORK_H

lib/SCSI2SD/src/firmware/scsi.c

@@ -1,4 +1,5 @@
 //	Copyright (C) 2014 Michael McMaster <michael@codesrc.com>
+//	Copyright (c) 2023 joshua stein <jcs@jcs.org>
 //
 //	This file is part of SCSI2SD.
 //
@@ -15,6 +16,7 @@
 //	You should have received a copy of the GNU General Public License
 //	along with SCSI2SD.  If not, see <http://www.gnu.org/licenses/>.
 
+
 #include "scsi.h"
 #include "scsiPhy.h"
 #include "config.h"
@@ -26,7 +28,7 @@
 #include "scsi2sd_time.h"
 #include "bsp.h"
 #include "cdrom.h"
-//#include "debug.h"
+#include "network.h"
 #include "tape.h"
 #include "mo.h"
 #include "vendor.h"
@@ -561,6 +563,9 @@ static void process_Command()
 	// write commands. Will fall-through to generic disk handling.
 	else if (((cfg->deviceType == S2S_CFG_OPTICAL) && scsiCDRomCommand()) ||
 		((cfg->deviceType == S2S_CFG_SEQUENTIAL) && scsiTapeCommand()) ||
+#ifdef ZULUSCSI_NETWORK
+		((cfg->deviceType == S2S_CFG_NETWORK && scsiNetworkCommand())) ||
+#endif // ZULUSCSI_NETWORK
 		((cfg->deviceType == S2S_CFG_MO) && scsiMOCommand()))
 	{
 		// Already handled.

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform.cpp

@@ -26,6 +26,7 @@
 #include <scsi.h>
 #include <assert.h>
 #include <hardware/gpio.h>
+#include <hardware/pio.h>
 #include <hardware/uart.h>
 #include <hardware/pll.h>
 #include <hardware/clocks.h>
@@ -34,12 +35,34 @@
 #include <hardware/flash.h>
 #include <hardware/structs/xip_ctrl.h>
 #include <hardware/structs/usb.h>
-#include <platform/mbed_error.h>
-#include <multicore.h>
-#include <USB/PluggableUSBSerial.h>
-#include "audio.h"
 #include "scsi_accel_target.h"
 
+#ifdef __MBED__
+#  include <platform/mbed_error.h>
+#endif // __MBED__
+
+#ifndef __MBED__
+#ifndef PIO_FRAMEWORK_ARDUINO_NO_USB
+# include <SerialUSB.h>
+# include <class/cdc/cdc_device.h>
+#endif
+#else
+# include <USB/PluggableUSBSerial.h>
+#endif // __MBED__
+
+#ifndef ZULUSCSI_NETWORK
+#  include <multicore.h>
+#else
+#  include <pico/multicore.h> 
+extern "C" {
+#  include <pico/cyw43_arch.h>
+} 
+#endif // ZULUSCSI_NETWORK
+
+#ifdef ENABLE_AUDIO_OUTPUT
+#  include "audio.h"
+#endif // ENABLE_AUDIO_OUTPUT
+
 extern "C" {
 
 const char *g_platform_name = PLATFORM_NAME;
@@ -47,7 +70,9 @@ static bool g_scsi_initiator = false;
 static uint32_t g_flash_chip_size = 0;
 static bool g_uart_initialized = false;
 
+#ifdef __MBED__
 void mbed_error_hook(const mbed_error_ctx * error_context);
+#endif // __MBED__
 
 /***************/
 /* GPIO init   */
@@ -102,7 +127,7 @@ static void reclock_for_audio() {
     // reset UART for the new clock speed
     uart_init(uart0, 1000000);
 }
-#endif
+#endif  // ENABLE_AUDIO_OUT
 
 #ifdef HAS_DIP_SWITCHES
 enum pin_setup_state_t  {SETUP_FALSE, SETUP_TRUE, SETUP_UNDETERMINED};
@@ -152,6 +177,9 @@ void platform_init()
     // Make sure second core is stopped
     multicore_reset_core1();
 
+    pio_clear_instruction_memory(pio0);
+    pio_clear_instruction_memory(pio1);
+    
     /* First configure the pins that affect external buffer directions.
      * RP2040 defaults to pulldowns, while these pins have external pull-ups.
      */
@@ -188,17 +216,18 @@ void platform_init()
 # endif
 #else
     delay(10);
-#endif
+#endif // HAS_DIP_SWITCHES
 
 #ifndef DISABLE_SWO
     /* Initialize logging to SWO pin (UART0) */
     gpio_conf(SWO_PIN,        GPIO_FUNC_UART,false,false, true,  false, true);
     uart_init(uart0, 1000000);
     g_uart_initialized = true;
-#endif
+#endif // DISABLE_SWO
 
+#ifdef __MBED__
     mbed_set_error_hook(mbed_error_hook);
-
+#endif // __MBED__
     logmsg("Platform: ", g_platform_name);
     logmsg("FW Version: ", g_log_firmwareversion);
 
@@ -227,13 +256,13 @@ void platform_init()
 #else
     g_log_debug = false;
     logmsg ("SCSI termination is handled by a hardware jumper");
-#endif
+#endif  // HAS_DIP_SWITCHES
 
 #ifdef ENABLE_AUDIO_OUTPUT
     logmsg("SP/DIF audio to expansion header enabled");
     logmsg("-- Overclocking to 135.428571MHz");
     reclock_for_audio();
-#endif
+#endif // ENABLE_AUDIO_OUTPUT
 
     // Get flash chip size
     uint8_t cmd_read_jedec_id[4] = {0x9f, 0, 0, 0};
@@ -263,17 +292,15 @@ void platform_init()
     //        pin             function       pup   pdown  out    state fast
     gpio_conf(GPIO_I2C_SCL,   GPIO_FUNC_I2C, true,false, false,  true, true);
     gpio_conf(GPIO_I2C_SDA,   GPIO_FUNC_I2C, true,false, false,  true, true);
-#endif
+#endif  // GPIO_I2C_SDA
 #else
     //        pin             function       pup   pdown  out    state fast
     gpio_conf(GPIO_EXP_AUDIO, GPIO_FUNC_SPI, true,false, false,  true, true);
     gpio_conf(GPIO_EXP_SPARE, GPIO_FUNC_SIO, true,false, false,  true, false);
     // configuration of corresponding SPI unit occurs in audio_setup()
-#endif
+#endif  // ENABLE_AUDIO_OUTPUT
 }
 
-
-
 // late_init() only runs in main application, SCSI not needed in bootloader
 void platform_late_init()
 {
@@ -289,7 +316,7 @@ void platform_late_init()
 #else
     g_scsi_initiator = false;
     logmsg("SCSI target/disk mode, acting as a SCSI disk");
-#endif
+#endif // defined(HAS_DIP_SWITCHES) && defined(PLATFORM_HAS_INITIATOR_MODE)
 
     /* Initialize SCSI pins to required modes.
      * SCSI pins should be inactive / input at this point.
@@ -339,10 +366,16 @@ void platform_late_init()
         gpio_conf(SCSI_IN_ATN,    GPIO_FUNC_SIO, true, false, false, true, false);
         gpio_conf(SCSI_IN_RST,    GPIO_FUNC_SIO, true, false, false, true, false);
 
+#ifndef __MBED__
+# ifndef PIO_FRAMEWORK_ARDUINO_NO_USB
+    Serial.begin();
+# endif
+#endif // __MBED__
+
 #ifdef ENABLE_AUDIO_OUTPUT
         // one-time control setup for DMA channels and second core
         audio_setup();
-#endif
+#endif // ENABLE_AUDIO_OUTPUT
     }
     else
     {
@@ -363,7 +396,7 @@ void platform_late_init()
         gpio_conf(SCSI_OUT_SEL,   GPIO_FUNC_SIO, false,false, true,  true, true);
         gpio_conf(SCSI_OUT_ACK,   GPIO_FUNC_SIO, false,false, true,  true, true);
         gpio_conf(SCSI_OUT_ATN,   GPIO_FUNC_SIO, false,false, true,  true, true);
-#endif
+#endif  // PLATFORM_HAS_INITIATOR_MODE
     }
 }
 
@@ -409,6 +442,7 @@ void platform_emergency_log_save()
     crashfile.close();
 }
 
+#ifdef __MBED__
 void mbed_error_hook(const mbed_error_ctx * error_context)
 {
     logmsg("--------------");
@@ -452,6 +486,7 @@ void mbed_error_hook(const mbed_error_ctx * error_context)
         for (int j = 0; j < base_delay * 10; j++) delay_ns(100000);
     }
 }
+#endif // __MBED__
 
 /*****************************************/
 /* Debug logging and watchdog            */
@@ -469,7 +504,26 @@ void mbed_error_hook(const mbed_error_ctx * error_context)
 static void usb_log_poll()
 {
     static uint32_t logpos = 0;
-
+#ifndef __MBED__
+# ifndef PIO_FRAMEWORK_ARDUINO_NO_USB
+    if (Serial.availableForWrite())
+    {
+        // Retrieve pointer to log start and determine number of bytes available.
+        uint32_t available = 0;
+        const char *data = log_get_buffer(&logpos, &available);
+                // Limit to CDC packet size
+        uint32_t len = available;
+        if (len == 0) return;
+        if (len > CFG_TUD_CDC_EP_BUFSIZE) len = CFG_TUD_CDC_EP_BUFSIZE;
+        
+        // Update log position by the actual number of bytes sent
+        // If USB CDC buffer is full, this may be 0
+        uint32_t actual = 0;
+        actual = Serial.write(data, len);
+        logpos -= available - actual;
+    }
+# endif // PIO_FRAMEWORK_ARDUINO_NO_USB
+#else
     if (_SerialUSB.ready())
     {
         // Retrieve pointer to log start and determine number of bytes available.
@@ -487,8 +541,10 @@ static void usb_log_poll()
         _SerialUSB.send_nb((uint8_t*)data, len, &actual);
         logpos -= available - actual;
     }
+#endif // __MBED__
 }
 
+
 // Use ADC to implement supply voltage monitoring for the +3.0V rail.
 // This works by sampling the temperature sensor channel, which has
 // a voltage of 0.7 V, allowing to calculate the VDD voltage.
@@ -518,7 +574,7 @@ static void adc_poll()
     * is playing.
     */
    if (audio_is_active()) return;
-#endif
+#endif  // ENABLE_AUDIO_OUTPUT
 
     int adc_value_max = 0;
     while (!adc_fifo_is_empty())
@@ -542,7 +598,7 @@ static void adc_poll()
             lowest_vdd_seen = vdd_mV - 50; // Small hysteresis to avoid excessive warnings
         }
     }
-#endif
+#endif // PLATFORM_VDD_WARNING_LIMIT_mV > 0
 }
 
 // This function is called for every log message.
@@ -613,6 +669,7 @@ static void watchdog_callback(unsigned alarm_num)
             }
 
             usb_log_poll();
+
             platform_emergency_log_save();
 
             platform_boot_to_main_firmware();
@@ -628,11 +685,26 @@ void platform_reset_watchdog()
 {
     g_watchdog_timeout = WATCHDOG_CRASH_TIMEOUT;
 
+
     if (!g_watchdog_initialized)
     {
-        hardware_alarm_claim(3);
-        hardware_alarm_set_callback(3, &watchdog_callback);
-        hardware_alarm_set_target(3, delayed_by_ms(get_absolute_time(), 1000));
+        int alarm_num = -1;
+        for (int i = 0; i < NUM_TIMERS; i++)
+        {
+            if (!hardware_alarm_is_claimed(i))
+            {
+                alarm_num = i;
+                break;
+            }
+        }
+        if (alarm_num == -1)
+        {
+            logmsg("No free watchdog hardware alarms to claim");
+            return;
+        }
+        hardware_alarm_claim(alarm_num);
+        hardware_alarm_set_callback(alarm_num, &watchdog_callback);
+        hardware_alarm_set_target(alarm_num, delayed_by_ms(get_absolute_time(), 1000));
         g_watchdog_initialized = true;
     }
 
@@ -650,7 +722,7 @@ void platform_poll()
     
 #ifdef ENABLE_AUDIO_OUTPUT
     audio_poll();
-#endif
+#endif // ENABLE_AUDIO_OUTPUT
 }
 
 uint8_t platform_get_buttons()
@@ -664,7 +736,7 @@ uint8_t platform_get_buttons()
     // SDA = button 1, SCL = button 2
     if (!gpio_get(GPIO_I2C_SDA)) buttons |= 1;
     if (!gpio_get(GPIO_I2C_SCL)) buttons |= 2;
-#endif
+#endif // defined(ENABLE_AUDIO_OUTPUT)
 
     // Simple debouncing logic: handle button releases after 100 ms delay.
     static uint32_t debounce;
@@ -705,12 +777,15 @@ bool platform_rewrite_flash_page(uint32_t offset, uint8_t buffer[PLATFORM_FLASH_
         }
     }
 
+
+#ifdef __MBED__
     if (NVIC_GetEnableIRQ(USBCTRL_IRQn))
     {
         logmsg("Disabling USB during firmware flashing");
         NVIC_DisableIRQ(USBCTRL_IRQn);
         usb_hw->main_ctrl = 0;
     }
+#endif // __MBED__
 
     dbgmsg("Writing flash at offset ", offset, " data ", bytearray(buffer, 4));
     assert(offset % PLATFORM_FLASH_PAGE_SIZE == 0);
@@ -780,7 +855,7 @@ void btldr_reset_handler()
 __attribute__((section(".btldr_vectors")))
 const void * btldr_vectors[2] = {&__StackTop, (void*)&btldr_reset_handler};
 
-#endif
+#endif // PLATFORM_BOOTLOADER_SIZE
 
 /************************************/
 /* ROM drive in extra flash space   */
@@ -847,7 +922,7 @@ bool platform_write_romdrive(const uint8_t *data, uint32_t start, uint32_t count
     return true;
 }
 
-#endif
+#endif // PLATFORM_HAS_ROM_DRIVE
 
 /**********************************************/
 /* Mapping from data bytes to GPIO BOP values */
@@ -943,6 +1018,8 @@ const uint16_t g_scsi_parity_check_lookup[512] __attribute__((aligned(1024), sec
 
 } /* extern "C" */
 
+
+#ifdef __MBED__
 /* Logging from mbed */
 
 static class LogTarget: public mbed::FileHandle {
@@ -969,3 +1046,4 @@ mbed::FileHandle *mbed::mbed_override_console(int fd)
 {
     return &g_LogTarget;
 }
+#endif // __MBED__

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform.h

@@ -25,6 +25,7 @@
 
 #include <stdint.h>
 #include <Arduino.h>
+#include "ZuluSCSI_platform_network.h"
 
 #ifdef ZULUSCSI_PICO
 // ZuluSCSI Pico carrier board variant
@@ -48,9 +49,14 @@ extern "C" {
 extern const char *g_platform_name;
 
 #ifdef ZULUSCSI_PICO
-# define PLATFORM_NAME "ZuluSCSI Pico"
+# ifdef ZULUSCSI_DAYNAPORT
+#   define PLATFORM_NAME "ZuluSCSI Pico DaynaPORT"
+# else
+#   define PLATFORM_NAME "ZuluSCSI Pico"
+# endif
 # define PLATFORM_REVISION "2.0"
 # define PLATFORM_HAS_INITIATOR_MODE 1
+# define DISABLE_SWO
 #elif defined(ZULUSCSI_BS2)
 # define PLATFORM_NAME "ZuluSCSI BS2"
 # define PLATFORM_REVISION "1.0"
@@ -157,9 +163,13 @@ bool platform_write_romdrive(const uint8_t *data, uint32_t start, uint32_t count
 extern const uint16_t g_scsi_parity_lookup[256];
 extern const uint16_t g_scsi_parity_check_lookup[512];
 
+
+
 #ifdef __cplusplus
 }
 
+
+
 // SD card driver for SdFat
 
 #ifdef SD_USE_SDIO

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform_gpio_Pico.h

@@ -71,8 +71,9 @@
 
 // Status LED pins
 #define LED_PIN      16
-#define LED_ON()     sio_hw->gpio_set = 1 << LED_PIN
-#define LED_OFF()    sio_hw->gpio_clr = 1 << LED_PIN
+#define LED_ON()    sio_hw->gpio_set = 1 << LED_PIN
+#define LED_OFF()   sio_hw->gpio_clr = 1 << LED_PIN
+
 
 // SD card pins in SDIO mode
 #define SDIO_CLK 10

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform_network.cpp

@@ -0,0 +1,354 @@
+/*
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifdef ZULUSCSI_NETWORK
+#include "ZuluSCSI_platform_network.h"
+#include "ZuluSCSI_log.h"
+#include "ZuluSCSI_config.h"
+#include <scsi.h>
+#include <network.h>
+
+extern "C" {
+
+#include <cyw43.h>
+#include <pico/cyw43_arch.h>
+
+#ifndef CYW43_IOCTL_GET_RSSI
+#define CYW43_IOCTL_GET_RSSI (0xfe)
+#endif
+
+#define PICO_W_GPIO_LED_PIN 0
+#define PICO_W_LED_ON() cyw43_arch_gpio_put(PICO_W_GPIO_LED_PIN, 1)
+#define PICO_W_LED_OFF() cyw43_arch_gpio_put(PICO_W_GPIO_LED_PIN, 0)
+#define PICO_W_LONG_BLINK_DELAY 200
+#define PICO_W_SHORT_BLINK_DELAY 75
+
+struct wifi_network_entry wifi_network_list[WIFI_NETWORK_LIST_ENTRY_COUNT] = { 0 };
+
+// A default DaynaPort-compatible MAC
+static const char defaultMAC[] = { 0x00, 0x80, 0x19, 0xc0, 0xff, 0xee };
+
+static bool network_in_use = false;
+
+bool platform_network_supported()
+{
+	/* from cores/rp2040/RP2040Support.h */
+#if !defined(ARDUINO_RASPBERRY_PI_PICO_W)
+	return false;
+#else
+	extern bool __isPicoW;
+	return __isPicoW;
+#endif
+}
+
+int platform_network_init(char *mac)
+{
+	pico_unique_board_id_t board_id;
+	uint8_t set_mac[6], read_mac[6];
+
+	if (!platform_network_supported())
+		return -1;
+
+	// long signal blink at network initialization
+	PICO_W_LED_OFF();
+	PICO_W_LED_ON();
+	delay(PICO_W_LONG_BLINK_DELAY);
+	PICO_W_LED_OFF();
+
+
+	logmsg(" ");
+	logmsg("=== Network Initialization ===");
+
+	memset(wifi_network_list, 0, sizeof(wifi_network_list));
+
+	cyw43_deinit(&cyw43_state);
+	cyw43_init(&cyw43_state);
+
+	if (mac == NULL || (mac[0] == 0 && mac[1] == 0 && mac[2] == 0 && mac[3] == 0 && mac[4] == 0 && mac[5] == 0))
+	{
+		mac = (char *)&set_mac;
+		memcpy(mac, defaultMAC, sizeof(set_mac));
+
+		// retain Dayna vendor but use a device id specific to this board
+		pico_get_unique_board_id(&board_id);
+		if (g_log_debug)
+			logmsg_f("Unique board id: %02x %02x %02x %02x  %02x %02x %02x %02x",
+				board_id.id[0], board_id.id[1], board_id.id[2], board_id.id[3],
+				board_id.id[4], board_id.id[5], board_id.id[6], board_id.id[7]);
+
+		if (board_id.id[3] != 0 && board_id.id[4] != 0 && board_id.id[5] != 0)
+		{
+			mac[3] = board_id.id[3];
+			mac[4] = board_id.id[4];
+			mac[5] = board_id.id[5];
+		}
+
+		memcpy(scsiDev.boardCfg.wifiMACAddress, mac, sizeof(scsiDev.boardCfg.wifiMACAddress));
+	}
+
+	// setting the MAC requires libpico to be compiled with CYW43_USE_OTP_MAC=0
+	memcpy(cyw43_state.mac, mac, sizeof(cyw43_state.mac));
+	cyw43_arch_enable_sta_mode();
+
+	cyw43_wifi_get_mac(&cyw43_state, CYW43_ITF_STA, read_mac);
+	logmsg_f("Wi-Fi MAC: %02X:%02X:%02X:%02X:%02X:%02X",
+		read_mac[0], read_mac[1], read_mac[2], read_mac[3], read_mac[4], read_mac[5]);
+	if (memcmp(mac, read_mac, sizeof(read_mac)) != 0)
+		logmsg_f("WARNING: Wi-Fi MAC is not what was requested (%02x:%02x:%02x:%02x:%02x:%02x), is libpico not compiled with CYW43_USE_OTP_MAC=0?",
+			mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+
+	network_in_use = true;
+
+	return 0;
+}
+
+void platform_network_add_multicast_address(uint8_t *mac)
+{
+	int ret;
+
+	if ((ret = cyw43_wifi_update_multicast_filter(&cyw43_state, mac, true)) != 0)
+		logmsg_f("%s: cyw43_wifi_update_multicast_filter: %d", __func__, ret);
+}
+
+bool platform_network_wifi_join(char *ssid, char *password)
+{
+	int ret;
+
+	if (!platform_network_supported())
+		return false;
+
+	if (password == NULL || password[0] == 0)
+	{
+		logmsg_f("Connecting to Wi-Fi SSID \"%s\" with no authentication", ssid);
+		ret = cyw43_arch_wifi_connect_async(ssid, NULL, CYW43_AUTH_OPEN);
+	}
+	else
+	{
+		logmsg_f("Connecting to Wi-Fi SSID \"%s\" with WPA/WPA2 PSK", ssid);
+		ret = cyw43_arch_wifi_connect_async(ssid, password, CYW43_AUTH_WPA2_MIXED_PSK);
+	}
+
+	if (ret != 0)
+	{
+		logmsg_f("Wi-Fi connection failed: %d", ret);
+	}
+	else
+	{
+		// Short single blink at start of connection sequence
+		PICO_W_LED_OFF();
+		delay(PICO_W_SHORT_BLINK_DELAY);
+		PICO_W_LED_ON();
+		delay(PICO_W_SHORT_BLINK_DELAY);
+		PICO_W_LED_OFF();
+	}
+	
+	return (ret == 0);
+}
+
+void platform_network_poll()
+{
+	if (!network_in_use)
+		return;
+
+	scsiNetworkPurge();
+	cyw43_arch_poll();
+}
+
+int platform_network_send(uint8_t *buf, size_t len)
+{
+	int ret = cyw43_send_ethernet(&cyw43_state, 0, len, buf, 0);
+	if (ret != 0)
+		logmsg_f("cyw43_send_ethernet failed: %d", ret);
+
+	return ret;
+}
+
+static int platform_network_wifi_scan_result(void *env, const cyw43_ev_scan_result_t *result)
+{
+	struct wifi_network_entry *entry = NULL;
+
+	if (!result || !result->ssid_len || !result->ssid[0])
+		return 0;
+
+	for (int i = 0; i < WIFI_NETWORK_LIST_ENTRY_COUNT; i++)
+	{
+		// take first available
+		if (wifi_network_list[i].ssid[0] == '\0')
+		{
+			entry = &wifi_network_list[i];
+			break;
+		}
+		// or if we've seen this network before, use this slot
+		else if (strcmp((char *)result->ssid, wifi_network_list[i].ssid) == 0)
+		{
+			entry = &wifi_network_list[i];
+			break;
+		}
+	}
+
+	if (!entry)
+	{
+		// no available slots, insert according to our RSSI
+		for (int i = 0; i < WIFI_NETWORK_LIST_ENTRY_COUNT; i++)
+		{
+			if (result->rssi > wifi_network_list[i].rssi)
+			{
+				// shift everything else down
+				for (int j = WIFI_NETWORK_LIST_ENTRY_COUNT - 1; j > i; j--)
+					wifi_network_list[j] = wifi_network_list[j - 1];
+
+				entry = &wifi_network_list[i];
+				memset(entry, 0, sizeof(struct wifi_network_entry));
+				break;
+			}
+		}
+	}
+
+	if (entry == NULL)
+		return 0;
+
+	if (entry->rssi == 0 || result->rssi > entry->rssi)
+	{
+		entry->channel = result->channel;
+		entry->rssi = result->rssi;
+	}
+	if (result->auth_mode & 7)
+		entry->flags = WIFI_NETWORK_FLAGS_AUTH;
+	strncpy(entry->ssid, (const char *)result->ssid, sizeof(entry->ssid));
+	entry->ssid[sizeof(entry->ssid) - 1] = '\0';
+	memcpy(entry->bssid, result->bssid, sizeof(entry->bssid));
+
+	return 0;
+}
+
+int platform_network_wifi_start_scan()
+{
+	if (cyw43_wifi_scan_active(&cyw43_state))
+		return -1;
+
+	cyw43_wifi_scan_options_t scan_options = { 0 };
+	memset(wifi_network_list, 0, sizeof(wifi_network_list));
+	return cyw43_wifi_scan(&cyw43_state, &scan_options, NULL, platform_network_wifi_scan_result);
+}
+
+int platform_network_wifi_scan_finished()
+{
+	return !cyw43_wifi_scan_active(&cyw43_state);
+}
+
+void platform_network_wifi_dump_scan_list()
+{
+	struct wifi_network_entry *entry = NULL;
+	
+	for (int i = 0; i < WIFI_NETWORK_LIST_ENTRY_COUNT; i++)
+	{
+		entry = &wifi_network_list[i];
+
+		if (entry->ssid[0] == '\0')
+			break;
+			
+		logmsg_f("wifi[%d] = %s, channel %d, rssi %d, bssid %02x:%02x:%02x:%02x:%02x:%02x, flags %d",
+			i, entry->ssid, entry->channel, entry->rssi,
+			entry->bssid[0], entry->bssid[1], entry->bssid[2],
+			entry->bssid[3], entry->bssid[4], entry->bssid[5],
+			entry->flags);
+	}
+}
+
+int platform_network_wifi_rssi()
+{
+	int32_t rssi = 0;
+
+    cyw43_ioctl(&cyw43_state, CYW43_IOCTL_GET_RSSI, sizeof(rssi), (uint8_t *)&rssi, CYW43_ITF_STA);
+	return rssi;
+}
+
+char * platform_network_wifi_ssid()
+{
+	struct ssid_t {
+		uint32_t ssid_len;
+		uint8_t ssid[32 + 1];
+	} ssid;
+	static char cur_ssid[32 + 1];
+
+	memset(cur_ssid, 0, sizeof(cur_ssid));
+
+	int ret = cyw43_ioctl(&cyw43_state, CYW43_IOCTL_GET_SSID, sizeof(ssid), (uint8_t *)&ssid, CYW43_ITF_STA);
+	if (ret)
+	{
+		logmsg_f("Failed getting Wi-Fi SSID: %d", ret);
+		return NULL;
+	}
+
+	ssid.ssid[sizeof(ssid.ssid) - 1] = '\0';
+	if (ssid.ssid_len < sizeof(ssid.ssid))
+		ssid.ssid[ssid.ssid_len] = '\0';
+	
+	strlcpy(cur_ssid, (char *)ssid.ssid, sizeof(cur_ssid));
+	return cur_ssid;
+}
+
+char * platform_network_wifi_bssid()
+{
+	static char bssid[6];
+
+	memset(bssid, 0, sizeof(bssid));
+
+	/* TODO */
+
+	return bssid;
+}
+
+int platform_network_wifi_channel()
+{
+	int32_t channel = 0;
+
+    cyw43_ioctl(&cyw43_state, CYW43_IOCTL_GET_CHANNEL, sizeof(channel), (uint8_t *)&channel, CYW43_ITF_STA);
+	return channel;
+}
+
+// these override weakly-defined functions in pico-sdk
+
+void cyw43_cb_process_ethernet(void *cb_data, int itf, size_t len, const uint8_t *buf)
+{
+	scsiNetworkEnqueue(buf, len);
+}
+
+void cyw43_cb_tcpip_set_link_down(cyw43_t *self, int itf)
+{
+	logmsg_f("Disassociated from Wi-Fi SSID \"%s\"", self->ap_ssid);
+}
+
+void cyw43_cb_tcpip_set_link_up(cyw43_t *self, int itf)
+{
+	char *ssid = platform_network_wifi_ssid();
+
+	if (ssid)
+	{
+		logmsg_f("Successfully connected to Wi-Fi SSID \"%s\"", ssid);
+		// blink LED 3 times when connected
+		PICO_W_LED_OFF();
+		for (uint8_t i = 0; i < 3; i++)
+		{
+			delay(PICO_W_SHORT_BLINK_DELAY);
+			PICO_W_LED_ON();
+			delay(PICO_W_SHORT_BLINK_DELAY);
+			PICO_W_LED_OFF();
+		}
+	}
+}
+
+}
+#endif // ZULUSCSI_NETWORK

lib/ZuluSCSI_platform_RP2040/ZuluSCSI_platform_network.h

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#pragma once
+
+#ifdef ZULUSCSI_NETWORK
+
+#include <stdint.h>
+#include <stddef.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct __attribute__((packed)) wifi_network_entry {
+	char ssid[64];
+	char bssid[6];
+	int8_t rssi;
+	uint8_t channel;
+	uint8_t flags;
+	uint8_t _padding;
+#define WIFI_NETWORK_FLAGS_AUTH 0x1
+};
+
+#define WIFI_NETWORK_LIST_ENTRY_COUNT 10
+extern struct wifi_network_entry wifi_network_list[WIFI_NETWORK_LIST_ENTRY_COUNT];
+
+struct __attribute__((packed)) wifi_join_request {
+	char ssid[64];
+	char key[64];
+	uint8_t channel;
+	uint8_t _padding;
+};
+
+bool platform_network_supported();
+void platform_network_poll();
+int platform_network_init(char *mac);
+void platform_network_add_multicast_address(uint8_t *mac);
+bool platform_network_wifi_join(char *ssid, char *password);
+int platform_network_wifi_start_scan();
+int platform_network_wifi_scan_finished();
+void platform_network_wifi_dump_scan_list();
+int platform_network_wifi_rssi();
+char * platform_network_wifi_ssid();
+char * platform_network_wifi_bssid();
+int platform_network_wifi_channel();
+int platform_network_send(uint8_t *buf, size_t len);
+
+# ifdef __cplusplus
+}
+# endif
+
+#endif // ZULUSCSI_NETWORK

lib/ZuluSCSI_platform_RP2040/rp2040-daynaport.ld

@@ -0,0 +1,217 @@
+/** 
+ * ZuluSCSI™ - Copyright (c) 2023 Rabbit Hole Computing™
+ * 
+ * ZuluSCSI™ firmware is licensed under the GPL version 3 or any later version. 
+ * 
+ * https://www.gnu.org/licenses/gpl-3.0.html
+ * ----
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version. 
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details. 
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+**/
+
+MEMORY
+{
+    FLASH(rx) : ORIGIN = 0x10000000, LENGTH = 576k
+    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 256k  /* Leave space for pico-debug */
+    SCRATCH_X(rwx) : ORIGIN = 0x20040000, LENGTH = 4k
+    SCRATCH_Y(rwx) : ORIGIN = 0x20041000, LENGTH = 4k
+}
+ENTRY(_entry_point)
+SECTIONS
+{
+    .flash_begin : {
+        __flash_binary_start = .;
+    } > FLASH
+    .boot2 : {
+        __boot2_start__ = .;
+        KEEP (*(.boot2))
+        __boot2_end__ = .;
+    } > FLASH
+    ASSERT(__boot2_end__ - __boot2_start__ == 256,
+        "ERROR: Pico second stage bootloader must be 256 bytes in size")
+    /* If ZuluSCSI SD card bootloader is included, it goes in first 128 kB */
+    
+    .text.bootloader : ALIGN(16) SUBALIGN(16)
+    {
+        KEEP(*(.text.btldr*))
+        . = ALIGN(131072);
+        CHECK_BOOTLOADER_SIZE = 1 / (. <= 131072);
+    } > FLASH
+
+    .text : {
+        __logical_binary_start = .;
+        __real_vectors_start = .;
+        KEEP (*(.vectors))
+        KEEP (*(.binary_info_header))
+        __binary_info_header_end = .;
+        KEEP (*(.reset))
+        KEEP (*(.init))
+        *(.fini)
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+        *(.eh_frame*)
+        . = ALIGN(4);
+
+        /* Put only non-timecritical code in flash
+         * This includes e.g. floating point math routines.
+         */
+        *libm*:(.text .text*)
+        *libc*:(.text .text*)
+        *libgcc*:*df*(.text .text*)
+        *USB*(.text .text*)
+        *SPI*(.text .text*)
+        *Spi*(.text .text*)
+        *spi*(.text .text*)
+        *stdc*:(.text .text*)
+        *supc*:(.text .text*)
+        *nosys*:(.text .text*)
+        *libc*:*printf*(.text .text*)
+        *libc*:*toa*(.text .text*)
+        *libminIni.a:(.text .text*)
+        *libCUEParser.a:(.text .text*)
+        /* RP2040 breakpoints in RAM code don't always work very well
+         * because the boot routine tends to overwrite them.
+         * Uncommenting this line puts all code in flash.
+         */
+        /* *(.text .text*) */
+    } > FLASH
+    .rodata : {
+        . = ALIGN(4);
+        *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.flashdata*)))
+        *(.rodata)
+        *(.rodata*)
+        . = ALIGN(4);
+    } > FLASH
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+    . = ALIGN(4);
+    __binary_info_start = .;
+    .binary_info :
+    {
+        KEEP(*(.binary_info.keep.*))
+        *(.binary_info.*)
+    } > FLASH
+    __binary_info_end = .;
+    . = ALIGN(4);
+    __etext = .;
+   .ram_vector_table (COPY): {
+        *(.ram_vector_table)
+    } > RAM
+    .data : {
+        __data_start__ = .;
+        *(vtable)
+
+        /* Time critical code will go here to avoid external flash latency */
+        *(.time_critical*)
+        . = ALIGN(4);
+        *(.text)
+        *(.text*)
+
+        . = ALIGN(4);
+        *(.data*)
+        . = ALIGN(4);
+        *(.after_data.*)
+        . = ALIGN(4);
+        PROVIDE_HIDDEN (__mutex_array_start = .);
+        KEEP(*(SORT(.mutex_array.*)))
+        KEEP(*(.mutex_array))
+        PROVIDE_HIDDEN (__mutex_array_end = .);
+        . = ALIGN(4);
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(SORT(.preinit_array.*)))
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+        . = ALIGN(4);
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+        . = ALIGN(4);
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        *(SORT(.fini_array.*))
+        *(.fini_array)
+        PROVIDE_HIDDEN (__fini_array_end = .);
+        *(.jcr)
+        . = ALIGN(4);
+        __data_end__ = .;
+    } > RAM AT> FLASH
+    .uninitialized_data (COPY): {
+        . = ALIGN(4);
+        *(.uninitialized_data*)
+    } > RAM
+    .scratch_x : {
+        __scratch_x_start__ = .;
+        *(.scratch_x.*)
+        . = ALIGN(4);
+        __scratch_x_end__ = .;
+    } > SCRATCH_X AT > FLASH
+    __scratch_x_source__ = LOADADDR(.scratch_x);
+    .scratch_y : {
+        __scratch_y_start__ = .;
+        *(.scratch_y.*)
+        . = ALIGN(4);
+        __scratch_y_end__ = .;
+    } > SCRATCH_Y AT > FLASH
+    __scratch_y_source__ = LOADADDR(.scratch_y);
+    .bss : {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.bss*)))
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+    } > RAM
+    .heap (COPY):
+    {
+        __end__ = .;
+        PROVIDE(end = .);
+        *(.heap*)
+        . = ORIGIN(RAM) + LENGTH(RAM) - 0x400;
+        __HeapLimit = .;
+    } > RAM
+    .stack1_dummy (COPY):
+    {
+        *(.stack1*)
+    } > SCRATCH_X
+    .stack_dummy (COPY):
+    {
+        *(.stack*)
+    } > RAM
+    .flash_end : {
+        __flash_binary_end = .;
+    } > FLASH
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    __StackLimit = __StackTop - 0x400;
+    __StackOneTop = ORIGIN(SCRATCH_X) + LENGTH(SCRATCH_X);
+    __StackOneBottom = __StackOneTop - SIZEOF(.stack1_dummy);
+    __StackBottom = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed")
+    ASSERT( __binary_info_header_end - __logical_binary_start <= 256, "Binary info must be in first 256 bytes of the binary")
+}

lib/ZuluSCSI_platform_RP2040/rp2040_btldr.ld

@@ -33,7 +33,7 @@
      * which comes as part of the main firmware.elf and is never overwritten.
      */
     FLASH(rx) : ORIGIN = 0x10000100, LENGTH = 128k-256
-    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 240k  /* Leave space for pico-debug */
+    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 256k  /* Leave space for pico-debug */
     SCRATCH_X(rwx) : ORIGIN = 0x20040000, LENGTH = 4k
     SCRATCH_Y(rwx) : ORIGIN = 0x20041000, LENGTH = 4k
 }

lib/ZuluSCSI_platform_RP2040/run_pioasm.sh

@@ -6,9 +6,9 @@ pioasm sdio_RP2040.pio sdio_RP2040.pio.h
 pioasm sdio_Pico.pio sdio_Pico.pio.h
 pioasm sdio_BS2.pio sdio_BS2.pio.h
 
-pioasm scsi_accel_target_RP2040.pio scsi_accel_target_RPP2040.pio.h
-pioasm scsi_accel_target_Pico.pio scsi_accel_target_Pico.pio.h
+pioasm scsi_accel_target_RP2040.pio scsi_accel_target_RP2040.pio.h
 pioasm scsi_accel_target_BS2.pio scsi_accel_target_BS2.pio.h
+pioasm scsi_accel_target_Pico.pio scsi_accel_target_Pico.pio.h
 
 pioasm scsi_accel_host_RP2040.pio scsi_accel_host_RP2040.pio.h
 pioasm scsi_accel_host_Pico.pio scsi_accel_host_Pico.pio.h

lib/ZuluSCSI_platform_RP2040/scsi_accel_host.cpp

@@ -37,7 +37,6 @@
 #include "scsi_accel_host_RP2040.pio.h"
 #endif
 
-
 #define SCSI_PIO pio0
 #define SCSI_SM 0
 

lib/ZuluSCSI_platform_RP2040/scsi_accel_target.cpp

@@ -1,6 +1,9 @@
 /** 
  * ZuluSCSI™ - Copyright (c) 2022 Rabbit Hole Computing™
  * 
+ * This work incorporates work from the following
+ *  Copyright (c) 2023 joshua stein <jcs@jcs.org>
+ * 
  * ZuluSCSI™ firmware is licensed under the GPL version 3 or any later version. 
  * 
  * https://www.gnu.org/licenses/gpl-3.0.html
@@ -35,23 +38,39 @@
 #include <hardware/irq.h>
 #include <hardware/structs/iobank0.h>
 #include <hardware/sync.h>
+
+#ifdef ENABLE_AUDIO_OUTPUT
 #include <audio.h>
+#endif // ENABLE_AUDIO_OUTPUT
+
+#ifdef ZULUSCSI_NETWORK
+#include <pico/multicore.h>
+#else
 #include <multicore.h>
+#endif // ZULUSCSI_NETWORK
 
 #if defined(ZULUSCSI_PICO) || defined(ZULUSCSI_BS2)
 #include "scsi_accel_target_Pico.pio.h"
 #else
 #include "scsi_accel_target_RP2040.pio.h"
-#endif
+#endif // ZULUSCSI_PICO
 
 // SCSI bus write acceleration uses up to 3 PIO state machines:
 // SM0: Convert data bytes to lookup addresses to add parity
 // SM1: Write data to SCSI bus
 // SM2: For synchronous mode only, count ACK pulses
-#define SCSI_DMA_PIO pio0
-#define SCSI_PARITY_SM 0
-#define SCSI_DATA_SM 1
-#define SCSI_SYNC_SM 2
+#ifdef ZULUSCSI_NETWORK
+#  define SCSI_DMA_PIO pio0
+#  define SCSI_PARITY_SM 1
+#  define SCSI_DATA_SM 2
+#  define SCSI_SYNC_SM 3
+#else
+#  define SCSI_DMA_PIO pio0
+#  define SCSI_PARITY_SM 0
+#  define SCSI_DATA_SM 1
+#  define SCSI_SYNC_SM 2
+#endif // ZULUSCSI_NETWORK
+
 
 // SCSI bus write acceleration uses 3 or 4 DMA channels (data flow A->B->C->D):
 // A: Bytes from RAM to scsi_parity PIO
@@ -64,10 +83,17 @@
 // B: Lookup from g_scsi_parity_check_lookup and copy to scsi_read_parity PIO
 // C: Addresses from scsi_accel_read PIO to lookup DMA READ_ADDR register
 // D: From pacer to data state machine to trigger transfers
-#define SCSI_DMA_CH_A 0
-#define SCSI_DMA_CH_B 1
-#define SCSI_DMA_CH_C 2
-#define SCSI_DMA_CH_D 3
+#ifdef ZULUSCSI_NETWORK
+#  define SCSI_DMA_CH_A 6
+#  define SCSI_DMA_CH_B 7
+#  define SCSI_DMA_CH_C 8
+#  define SCSI_DMA_CH_D 9
+#else
+#  define SCSI_DMA_CH_A 0
+#  define SCSI_DMA_CH_B 1
+#  define SCSI_DMA_CH_C 2
+#  define SCSI_DMA_CH_D 3
+#endif
 
 static struct {
     uint8_t *app_buf; // Buffer provided by application
@@ -843,10 +869,35 @@ void scsi_accel_rp2040_init()
 {
     g_scsi_dma_state = SCSIDMA_IDLE;
     scsidma_config_gpio();
-
-    // Mark channels as being in use, unless it has been done already
+    
+    if (g_channels_claimed) {
+        // Un-claim all SCSI state machines
+        pio_sm_unclaim(SCSI_DMA_PIO, SCSI_PARITY_SM);
+        pio_sm_unclaim(SCSI_DMA_PIO, SCSI_DATA_SM);
+        pio_sm_unclaim(SCSI_DMA_PIO, SCSI_SYNC_SM);
+
+        // Remove all SCSI programs
+        pio_remove_program(SCSI_DMA_PIO, &scsi_parity_program, g_scsi_dma.pio_offset_parity);
+        pio_remove_program(SCSI_DMA_PIO, &scsi_accel_async_write_program, g_scsi_dma.pio_offset_async_write);
+        pio_remove_program(SCSI_DMA_PIO, &scsi_sync_write_pacer_program, g_scsi_dma.pio_offset_sync_write_pacer);
+        pio_remove_program(SCSI_DMA_PIO, &scsi_sync_write_program, g_scsi_dma.pio_offset_sync_write);
+        pio_remove_program(SCSI_DMA_PIO, &scsi_accel_read_program, g_scsi_dma.pio_offset_read);
+        pio_remove_program(SCSI_DMA_PIO, &scsi_sync_read_pacer_program, g_scsi_dma.pio_offset_sync_read_pacer);
+        pio_remove_program(SCSI_DMA_PIO, &scsi_read_parity_program, g_scsi_dma.pio_offset_read_parity);
+
+        // Un-claim all SCSI DMA channels
+        dma_channel_unclaim(SCSI_DMA_CH_A);
+        dma_channel_unclaim(SCSI_DMA_CH_B);
+        dma_channel_unclaim(SCSI_DMA_CH_C);
+        dma_channel_unclaim(SCSI_DMA_CH_D);
+
+        // Set flag to re-initialize SCSI PIO system
+        g_channels_claimed = false;
+    }
+    
     if (!g_channels_claimed)
     {
+        // Mark channels as being in use, unless it has been done already
         pio_sm_claim(SCSI_DMA_PIO, SCSI_PARITY_SM);
         pio_sm_claim(SCSI_DMA_PIO, SCSI_DATA_SM);
         pio_sm_claim(SCSI_DMA_PIO, SCSI_SYNC_SM);
@@ -857,9 +908,11 @@ void scsi_accel_rp2040_init()
         g_channels_claimed = true;
     }
 
+#ifndef ZULUSCSI_NETWORK
     // Load PIO programs
     pio_clear_instruction_memory(SCSI_DMA_PIO);
-    
+#endif // ZULUSCSI_NETWORK
+
     // Parity lookup generator
     g_scsi_dma.pio_offset_parity = pio_add_program(SCSI_DMA_PIO, &scsi_parity_program);
     g_scsi_dma.pio_cfg_parity = scsi_parity_program_get_default_config(g_scsi_dma.pio_offset_parity);

platformio.ini

@@ -1,7 +1,7 @@
 ; PlatformIO Project Configuration File https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = ZuluSCSIv1_0, ZuluSCSIv1_0_mini, ZuluSCSIv1_1_plus, ZuluSCSI_RP2040, ZuluSCSI_RP2040_Audio, ZuluSCSI_Pico, ZuluSCSI_BS2
+default_envs = ZuluSCSIv1_0, ZuluSCSIv1_0_mini, ZuluSCSIv1_1_plus, ZuluSCSI_RP2040, ZuluSCSI_RP2040_Audio, ZuluSCSI_Pico, ZuluSCSI_Pico_DaynaPORT, ZuluSCSI_BS2
 
 ; Example platform to serve as a base for porting efforts
 [env:template]
@@ -98,7 +98,11 @@ lib_deps =
     ZuluSCSI_platform_RP2040
     SCSI2SD
     CUEParser
-debug_build_flags = -O2 -ggdb -g3
+debug_build_flags =
+    -O2 -ggdb -g3
+; The values can be adjusted down to get a debug build to fit in to SRAM
+    -DLOGBUFSIZE=4096
+    ; -DPREFETCH_BUFFER_SIZE=2048
 build_flags =
     -O2 -Isrc -ggdb -g3
     -Wall -Wno-sign-compare -Wno-ignored-qualifiers
@@ -130,8 +134,48 @@ build_flags =
     -DHAS_SDIO_CLASS
     -DUSE_ARDUINO=1
     -DZULUSCSI_PICO
-    -DDISABLE_SWO
 
+; Build for the ZuluSCSI Pico carrier board with a Pico-W
+; for SCSI DaynaPORT emulation
+[env:ZuluSCSI_Pico_DaynaPORT]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git
+platform_packages =
+    framework-arduinopico@https://github.com/rabbitholecomputing/arduino-pico.git#v3.6.0-DaynaPORT
+framework = arduino
+board = rpipicow
+board_build.core = earlephilhower
+extra_scripts = src/build_bootloader.py
+ldscript_bootloader = lib/ZuluSCSI_platform_RP2040/rp2040_btldr.ld
+board_build.ldscript = lib/ZuluSCSI_platform_RP2040/rp2040-daynaport.ld
+lib_deps =
+    SdFat=https://github.com/rabbitholecomputing/SdFat#2.2.0-gpt
+    minIni
+    ZuluSCSI_platform_RP2040
+    SCSI2SD
+    CUEParser
+build_flags =
+    -O2 -Isrc
+    -Wall -Wno-sign-compare -Wno-ignored-qualifiers
+    -DSPI_DRIVER_SELECT=3
+    -DSD_CHIP_SELECT_MODE=2
+    -DENABLE_DEDICATED_SPI=1
+    -DHAS_SDIO_CLASS
+    -DUSE_ARDUINO=1
+    -DZULUSCSI_PICO
+    -DZULUSCSI_NETWORK
+    -DZULUSCSI_DAYNAPORT
+; These take a large portion of the SRAM and can be adjusted
+    -DLOGBUFSIZE=8192
+    -DPREFETCH_BUFFER_SIZE=7168
+    -DSCSI2SD_BUFFER_SIZE=57344
+    ; This controls the depth of 2 x NETWORK_PACKET_MAX_SIZE (1520 bytes)
+    ; For example a queue size of 10 would be 10 x 2 x 1520 = 30400 bytes
+    -DNETWORK_PACKET_QUEUE_SIZE=18
+; build flags mirroring the framework-arduinopico#v3.6.0-DaynaPORT static library build
+    -DPICO_CYW43_ARCH_POLL=1
+	-DCYW43_LWIP=0
+	-DCYW43_USE_OTP_MAC=0
+    -DPIO_FRAMEWORK_ARDUINO_NO_USB
 
 ; Variant of RP2040 platform, based on Raspberry Pico board and a carrier PCB
 ; Differs in pinout from ZuluSCSI_RP2040 platform, but shares most of the code.

src/ZuluSCSI.cpp

@@ -7,6 +7,9 @@
  *  BlueSCSI
  *  Copyright (c) 2021  Eric Helgeson, Androda
  *  
+ * This work incorporates work by following
+ *  Copyright (c) 2023 joshua stein <jcs@jcs.org>
+ * 
  *  This file is free software: you may copy, redistribute and/or modify it  
  *  under the terms of the GNU General Public License as published by the  
  *  Free Software Foundation, either version 2 of the License, or (at your  
@@ -395,7 +398,15 @@ bool findHDDImages()
       bool is_mo = (tolower(name[0]) == 'm' && tolower(name[1]) == 'o');
       bool is_re = (tolower(name[0]) == 'r' && tolower(name[1]) == 'e');
       bool is_tp = (tolower(name[0]) == 't' && tolower(name[1]) == 'p');
-      if (is_hd || is_cd || is_fd || is_mo || is_re || is_tp)
+#ifdef ZULUSCSI_NETWORK
+      bool is_ne = (tolower(name[0]) == 'n' && tolower(name[1]) == 'e');
+#endif // ZULUSCSI_NETWORK
+
+      if (is_hd || is_cd || is_fd || is_mo || is_re || is_tp
+#ifdef ZULUSCSI_NETWORK
+        || is_ne
+#endif // ZULUSCSI_NETWORK
+      )
       {
         // Check if the image should be loaded to microcontroller flash ROM drive
         bool is_romdrive = false;
@@ -467,13 +478,22 @@ bool findHDDImages()
           logmsg("-- Ignoring ", fullname, ", SCSI ID ", id, " is already in use!");
           continue;
         }
-
+#ifdef ZULUSCSI_NETWORK
+        if (is_ne && !platform_network_supported())
+        {
+          logmsg("-- Ignoring ", fullname, ", networking is not supported on this hardware");
+          continue;
+        }
+#endif // ZULUSCSI_NETWORK
         // Type mapping based on filename.
         // If type is FIXED, the type can still be overridden in .ini file.
         S2S_CFG_TYPE type = S2S_CFG_FIXED;
         if (is_cd) type = S2S_CFG_OPTICAL;
         if (is_fd) type = S2S_CFG_FLOPPY_14MB;
         if (is_mo) type = S2S_CFG_MO;
+#ifdef ZULUSCSI_NETWORK
+        if (is_ne) type = S2S_CFG_NETWORK;
+#endif // ZULUSCSI_NETWORK
         if (is_re) type = S2S_CFG_REMOVABLE;
         if (is_tp) type = S2S_CFG_SEQUENTIAL;
 
@@ -522,11 +542,21 @@ bool findHDDImages()
     if (cfg && (cfg->scsiId & S2S_CFG_TARGET_ENABLED))
     {
       int capacity_kB = ((uint64_t)cfg->scsiSectors * cfg->bytesPerSector) / 1024;
-      logmsg("SCSI ID:", (int)(cfg->scsiId & 7),
-            " BlockSize:", (int)cfg->bytesPerSector,
-            " Type:", (int)cfg->deviceType,
-            " Quirks:", (int)cfg->quirks,
-            " ImageSize:", capacity_kB, "kB");
+
+      if (cfg->deviceType == S2S_CFG_NETWORK)
+      {
+        logmsg("SCSI ID: ", (int)(cfg->scsiId & 7),
+              ", Type: ", (int)cfg->deviceType,
+              ", Quirks: ", (int)cfg->quirks);
+      }
+      else
+      {
+        logmsg("SCSI ID: ", (int)(cfg->scsiId & S2S_CFG_TARGET_ID_BITS),
+              ", BlockSize: ", (int)cfg->bytesPerSector,
+              ", Type: ", (int)cfg->deviceType,
+              ", Quirks: ", (int)cfg->quirks,
+              ", Size: ", capacity_kB, "kB");
+      };
     }
   }
 
@@ -652,6 +682,14 @@ static void reinitSCSI()
   scsiPhyReset();
   scsiDiskInit();
   scsiInit();
+
+#ifdef ZULUSCSI_NETWORK
+  if (scsiDiskCheckAnyNetworkDevicesConfigured())
+  {
+    platform_network_init(scsiDev.boardCfg.wifiMACAddress);
+    platform_network_wifi_join(scsiDev.boardCfg.wifiSSID, scsiDev.boardCfg.wifiPassword);
+  }
+#endif // ZULUSCSI_NETWORK
   
 }
 extern "C" void zuluscsi_setup(void)
@@ -739,7 +777,11 @@ extern "C" void zuluscsi_main_loop(void)
   platform_reset_watchdog();
   platform_poll();
   diskEjectButtonUpdate(true);
-  
+
+#ifdef ZULUSCSI_NETWORK
+  platform_network_poll();
+#endif // ZULUSCSI_NETWORK
+
 #ifdef PLATFORM_HAS_INITIATOR_MODE
   if (platform_is_initiator_mode_enabled())
   {
@@ -809,8 +851,4 @@ extern "C" void zuluscsi_main_loop(void)
       }
     } while (!g_sdcard_present && !g_romdrive_active);
   }
-  else
-  {
-    
-  }
 }

src/ZuluSCSI_config.h

@@ -1,5 +1,6 @@
 /** 
  * ZuluSCSI™ - Copyright (c) 2022 Rabbit Hole Computing™
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
  * 
  * ZuluSCSI™ firmware is licensed under the GPL version 3 or any later version. 
  * 
@@ -27,7 +28,7 @@
 #include <ZuluSCSI_platform.h>
 
 // Use variables for version number
-#define FW_VER_NUM      "23.10.19"
+#define FW_VER_NUM      "23.10.20"
 #define FW_VER_SUFFIX   "dev"
 #define ZULU_FW_VERSION FW_VER_NUM "-" FW_VER_SUFFIX
 
@@ -79,6 +80,7 @@
 #define DRIVEINFO_OPTICAL   {"ZULUSCSI", "CDROM",     PLATFORM_REVISION, ""}
 #define DRIVEINFO_FLOPPY    {"ZULUSCSI", "FLOPPY",    PLATFORM_REVISION, ""}
 #define DRIVEINFO_MAGOPT    {"ZULUSCSI", "MO_DRIVE",  PLATFORM_REVISION, ""}
+#define DRIVEINFO_NETWORK   {"Dayna",    "SCSI/Link",       "2.0f", ""}
 #define DRIVEINFO_TAPE      {"ZULUSCSI", "TAPE",      PLATFORM_REVISION, ""}
 
 // Default optical drive blocksize
@@ -90,6 +92,7 @@
 #define APPLE_DRIVEINFO_OPTICAL   {"MATSHITA", "CD-ROM CR-8004A",   PLATFORM_REVISION, "2.0a"}
 #define APPLE_DRIVEINFO_FLOPPY    {"TEAC",     "FD235HS",           PLATFORM_REVISION, "1.44"}
 #define APPLE_DRIVEINFO_MAGOPT    {"MOST",     "RMD-5200",          PLATFORM_REVISION, "1.0"}
+#define APPLE_DRIVEINFO_NETWORK   {"Dayna",    "SCSI/Link",       "2.0f", ""}
 #define APPLE_DRIVEINFO_TAPE      {"ZULUSCSI", "APPLE_TAPE",        PLATFORM_REVISION, ""}
 
 // Default delay for SCSI phases.

src/ZuluSCSI_disk.cpp

@@ -276,6 +276,7 @@ static void setDefaultDriveInfo(int target_idx)
     static const char *driveinfo_optical[4]   = DRIVEINFO_OPTICAL;
     static const char *driveinfo_floppy[4]    = DRIVEINFO_FLOPPY;
     static const char *driveinfo_magopt[4]    = DRIVEINFO_MAGOPT;
+    static const char *driveinfo_network[4]   = DRIVEINFO_NETWORK;
     static const char *driveinfo_tape[4]      = DRIVEINFO_TAPE;
 
     static const char *apl_driveinfo_fixed[4]     = APPLE_DRIVEINFO_FIXED;
@@ -283,6 +284,7 @@ static void setDefaultDriveInfo(int target_idx)
     static const char *apl_driveinfo_optical[4]   = APPLE_DRIVEINFO_OPTICAL;
     static const char *apl_driveinfo_floppy[4]    = APPLE_DRIVEINFO_FLOPPY;
     static const char *apl_driveinfo_magopt[4]    = APPLE_DRIVEINFO_MAGOPT;
+    static const char *apl_driveinfo_network[4]   = APPLE_DRIVEINFO_NETWORK;
     static const char *apl_driveinfo_tape[4]      = APPLE_DRIVEINFO_TAPE;
 
     const char **driveinfo = NULL;
@@ -297,6 +299,7 @@ static void setDefaultDriveInfo(int target_idx)
             case S2S_CFG_OPTICAL:       driveinfo = apl_driveinfo_optical; break;
             case S2S_CFG_FLOPPY_14MB:   driveinfo = apl_driveinfo_floppy; break;
             case S2S_CFG_MO:            driveinfo = apl_driveinfo_magopt; break;
+            case S2S_CFG_NETWORK:       driveinfo = apl_driveinfo_network; break;
             case S2S_CFG_SEQUENTIAL:    driveinfo = apl_driveinfo_tape; break;
             default:                    driveinfo = apl_driveinfo_fixed; break;
         }
@@ -312,6 +315,7 @@ static void setDefaultDriveInfo(int target_idx)
             case S2S_CFG_FLOPPY_14MB:   driveinfo = driveinfo_floppy; break;
             case S2S_CFG_MO:            driveinfo = driveinfo_magopt; break;
             case S2S_CFG_SEQUENTIAL:    driveinfo = driveinfo_tape; break;
+            case S2S_CFG_NETWORK:       driveinfo = driveinfo_network; break;
             default:                    driveinfo = driveinfo_fixed; break;
         }
     }
@@ -383,13 +387,12 @@ bool scsiDiskOpenHDDImage(int target_idx, const char *filename, int scsi_id, int
         img.scsiId = scsi_id | S2S_CFG_TARGET_ENABLED;
         img.sdSectorStart = 0;
         
-        if (img.scsiSectors == 0)
+        if (type != S2S_CFG_NETWORK && img.scsiSectors == 0)
         {
             logmsg("---- Error: image file ", filename, " is empty");
             img.file.close();
             return false;
         }
-
         uint32_t sector_begin = 0, sector_end = 0;
         if (img.file.isRom())
         {
@@ -424,6 +427,13 @@ bool scsiDiskOpenHDDImage(int target_idx, const char *filename, int scsi_id, int
             logmsg("---- Configuring as magneto-optical");
             img.deviceType = S2S_CFG_MO;
         }
+#ifdef ZULUSCSI_NETWORK
+        else if (type == S2S_CFG_NETWORK)
+        {
+            logmsg("---- Configuring as network based on image name");
+            img.deviceType = S2S_CFG_NETWORK;
+        }
+#endif // ZULUSCSI_NETWORK
         else if (type == S2S_CFG_REMOVABLE)
         {
             logmsg("---- Configuring as removable drive");
@@ -960,6 +970,20 @@ uint8_t diskEjectButtonUpdate(bool immediate)
     }
 }
 
+bool scsiDiskCheckAnyNetworkDevicesConfigured()
+{
+    for (int i = 0; i < S2S_MAX_TARGETS; i++)
+    {
+        if (g_DiskImages[i].file.isOpen() && (g_DiskImages[i].scsiId & S2S_CFG_TARGET_ENABLED) && g_DiskImages[i].deviceType == S2S_CFG_NETWORK)
+        {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+
 /*******************************/
 /* Config handling for SCSI2SD */
 /*******************************/
@@ -967,6 +991,8 @@ uint8_t diskEjectButtonUpdate(bool immediate)
 extern "C"
 void s2s_configInit(S2S_BoardCfg* config)
 {
+    char tmp[64];
+
     if (SD.exists(CONFIGFILE))
     {
         logmsg("Reading configuration from " CONFIGFILE);
@@ -977,9 +1003,8 @@ void s2s_configInit(S2S_BoardCfg* config)
     }
 
     // Get default values from system preset, if any
-    char presetName[32];
-    ini_gets("SCSI", "System", "", presetName, sizeof(presetName), CONFIGFILE);
-    preset_config_t defaults = getSystemPreset(presetName);
+    ini_gets("SCSI", "System", "", tmp, sizeof(tmp), CONFIGFILE);
+    preset_config_t defaults = getSystemPreset(tmp);
 
     if (defaults.presetName)
     {
@@ -1057,6 +1082,37 @@ void s2s_configInit(S2S_BoardCfg* config)
         logmsg("-- EnableParity = No");
     }
 #endif
+
+    memset(tmp, 0, sizeof(tmp));
+    ini_gets("SCSI", "WiFiMACAddress", "", tmp, sizeof(tmp), CONFIGFILE);
+    if (tmp[0])
+    {
+        // convert from "01:23:45:67:89" to { 0x01, 0x23, 0x45, 0x67, 0x89 }
+        int mac[6];
+        if (sscanf(tmp, "%x:%x:%x:%x:%x:%x", &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]) == 6)
+        {
+            config->wifiMACAddress[0] = mac[0];
+            config->wifiMACAddress[1] = mac[1];
+            config->wifiMACAddress[2] = mac[2];
+            config->wifiMACAddress[3] = mac[3];
+            config->wifiMACAddress[4] = mac[4];
+            config->wifiMACAddress[5] = mac[5];
+        }
+        else
+        {
+            logmsg("Invalid MAC address format: \"", tmp, "\"");
+            memset(config->wifiMACAddress, 0, sizeof(config->wifiMACAddress));
+        }
+    }
+
+    memset(tmp, 0, sizeof(tmp));
+    ini_gets("SCSI", "WiFiSSID", "", tmp, sizeof(tmp), CONFIGFILE);
+    if (tmp[0]) memcpy(config->wifiSSID, tmp, sizeof(config->wifiSSID));
+
+    memset(tmp, 0, sizeof(tmp));
+    ini_gets("SCSI", "WiFiPassword", "", tmp, sizeof(tmp), CONFIGFILE);
+    if (tmp[0]) memcpy(config->wifiPassword, tmp, sizeof(config->wifiPassword));
+
 }
 
 extern "C"
@@ -1188,7 +1244,16 @@ static void doReadCapacity()
 
     image_config_t &img = *(image_config_t*)scsiDev.target->cfg;
     uint32_t bytesPerSector = scsiDev.target->liveCfg.bytesPerSector;
-    uint32_t capacity = img.file.size() / bytesPerSector;
+    uint32_t capacity;
+
+    if (unlikely(scsiDev.target->cfg->deviceType == S2S_CFG_NETWORK))
+    {
+        capacity = 1;
+    }
+    else
+    {
+        capacity = img.file.size() / bytesPerSector;
+    }
 
     if (!pmi && lba)
     {

src/ZuluSCSI_disk.h

@@ -2,6 +2,7 @@
  * SCSI2SD V6 - Copyright (C) 2013 Michael McMaster <michael@codesrc.com>
  * Copyright (C) 2014 Doug Brown <doug@downtowndougbrown.com
  * ZuluSCSI™ - Copyright (c) 2022 Rabbit Hole Computing™
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
  * 
  * It is derived from disk.h in SCSI2SD V6.
  * 
@@ -140,3 +141,6 @@ void scsiDiskStartRead(uint32_t lba, uint32_t blocks);
 
 // Start data transfer from SCSI bus to disk image
 void scsiDiskStartWrite(uint32_t lba, uint32_t blocks);
+
+// Returns true if there is at least one network device active
+bool scsiDiskCheckAnyNetworkDevicesConfigured();

src/ZuluSCSI_log.cpp

@@ -1,5 +1,6 @@
 /** 
  * ZuluSCSI™ - Copyright (c) 2022 Rabbit Hole Computing™
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
  * 
  * ZuluSCSI™ firmware is licensed under the GPL version 3 or any later version. 
  * 
@@ -23,6 +24,8 @@
 #include "ZuluSCSI_log.h"
 #include "ZuluSCSI_config.h"
 #include "ZuluSCSI_platform.h"
+#include <stdio.h>
+#include <stdarg.h>
 
 const char *g_log_firmwareversion = ZULU_FW_VERSION " " __DATE__ " " __TIME__;
 bool g_log_debug = true;
@@ -195,3 +198,35 @@ const char *log_get_buffer(uint32_t *startpos, uint32_t *available)
     return result;
 }
 
+void logmsg_f(const char *format, ...)
+{
+    static char out[2048];
+
+    va_list ap;
+    va_start(ap, format);
+    vsnprintf(out, sizeof(out), format, ap);
+    va_end(ap);
+
+    logmsg(out);
+}
+
+void logmsg_buf(const unsigned char *buf, unsigned long size)
+{
+    static char tmp[1500 * 3];
+    static char hex[] = "0123456789abcdef";
+    int o = 0;
+
+    for (int j = 0; j < size; j++) {
+        if (o + 3 >= sizeof(tmp))
+            break;
+
+        if (j != 0)
+            tmp[o++] = ' ';
+        tmp[o++] = hex[(buf[j] >> 4) & 0xf];
+        tmp[o++] = hex[buf[j] & 0xf];
+        tmp[o] = 0;
+    }
+
+    logmsg_f("%s", tmp);
+}
+

src/ZuluSCSI_log.h

@@ -1,5 +1,6 @@
 /** 
  * ZuluSCSI™ - Copyright (c) 2022 Rabbit Hole Computing™
+ * Copyright (c) 2023 joshua stein <jcs@jcs.org>
  * 
  * ZuluSCSI™ firmware is licensed under the GPL version 3 or any later version. 
  * 
@@ -68,6 +69,7 @@ inline void log_raw()
     // End of template recursion
 }
 
+
 extern "C" unsigned long millis();
 
 // Variadic template for printing multiple items
@@ -99,3 +101,14 @@ inline void dbgmsg(Params... params)
         log_raw("\r\n");
     }
 }
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+// Log long hex string
+void logmsg_buf(const unsigned char *buf, unsigned long size);
+// Log formatted string
+void logmsg_f(const char *format, ...);
+#ifdef __cplusplus
+}
+#endif

zuluscsi.ini

@@ -52,6 +52,11 @@
 #CDAVolume = 63 # Change CD Audio default volume. Maximum 255.
 #DisableMacSanityCheck = 0 # Disable sanity warnings for Mac disk drives. Default is 0 - enable checks
 
+# SCSI DaynaPORT settings
+#WiFiSSID = "Wifi SSID string"
+#WiFiPassword = "WiFi Password"
+#WiFiMACAddress = "01:23:45:67:89"
+
 # Settings can be overridden for individual devices.
 #[SCSI2]
 #Product = "Disk with ID2"