|
|
@@ -13,7 +13,7 @@ Examples of valid filenames:
|
|
|
Log files and error indications
|
|
|
-------------------------------
|
|
|
Log messages are stored in `azullog.txt`, which is cleared on every boot.
|
|
|
-Normally only basic initialization information is stored, but turning `DIPSW2` on will cause every SCSI command to be logged.
|
|
|
+Normally only basic initialization information is stored, but switching the `DBG` DIP switch on will cause every SCSI command to be logged, once the board is power cycled.
|
|
|
|
|
|
The indicator LED will normally report disk access.
|
|
|
It also reports following status conditions:
|
|
|
@@ -66,10 +66,10 @@ DIP switches
|
|
|
------------
|
|
|
The DIP switch settings are as follows:
|
|
|
|
|
|
-- DIPSW1: Not used
|
|
|
-- DIPSW2: Enable verbose debug log (saved to `azullog.txt`)
|
|
|
-- DIPSW3: Enable SCSI termination
|
|
|
-- DIPSW4: Enable built-in USB bootloader
|
|
|
+- DEBUG: Enable verbose debug log (saved to `azullog.txt`)
|
|
|
+- TERM: Enable SCSI termination
|
|
|
+- BOOT: Enable built-in USB bootloader, this DIP switch MUST remain off during normal operation.
|
|
|
+- SW1: Not used for anything, available for further customization.
|
|
|
|
|
|
Project structure
|
|
|
-----------------
|
Alex Perez