|
|
@@ -37,17 +37,21 @@ Plus
|
|
|
|
|
|
## Performance
|
|
|
|
|
|
+Tested on a Color Classic with [SCSI Director Pro 4](https://macintoshgarden.org/apps/scsi-director-pro-40)
|
|
|
+```
|
|
|
1012KB/Sec Write
|
|
|
900KB/Sec Read
|
|
|
1.01ms Seek
|
|
|
+```
|
|
|
+
|
|
|
|
|
|
## Assembly
|
|
|
|
|
|
1. Solder on the surface mount SD Card holder. Using the [Drag Solder](https://www.youtube.com/watch?v=nyele3CIs-U&start=34) technique.
|
|
|
- - Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
|
|
|
+ - Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
|
|
|
1. Solder the dioeds to the bottom of the board. Be sure they are flush as possible to the bottom.
|
|
|
1. Solder the header pins on to the BluePill. Then the blue pill to the BlueSCSI PCB.
|
|
|
- - Correct orientation is having the USB should be over the SD Card holder.
|
|
|
+ - Correct orientation is having the USB should be over the SD Card holder.
|
|
|
1. Solder on the Resistor nets. Pin one is marked on the board and the resistors.
|
|
|
1. SOlder on the Termination Jumpers & place the jupmpers on.
|
|
|
1. Solder the 50 Pin headers on.
|
Eric Helgeson