| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 |
- # Build Your Own
- These instructions will guide you through purchasing all of the parts needed to assemble kits for yourselves and for friends! Please note the hardware is licensed non-commercial.
- If you'd like to buy the kits pre-packaged/pre-flashed or fully assembled we have a network of makers here to help you out at https://scsi.blue
- ## Order Parts
- Updated for 1.0-c.
- ### PCB's
- Grab the latest Gerbers. Gerber files tell the PCB manufacturer how to create the BlueSCSI boards.
- https://github.com/erichelgeson/BlueSCSI/tree/main/hw/
- Order the boards from https://jlcpcb.com/ or your manufacturer of choice.
- ### Components
- #### Version 1.0-c, 1.1-a BOM
- https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5cc83feff
- ### BluePill
- Buy from a place where returns are easy. Ensure the photo in the listing shows a chip that says STM32 on it.
- https://www.amazon.com/s?k=stm32f103c8t6
- https://www.ebay.com/sch/i.html?_nkw=stm32f103c8t6
- ### STlinkV2
- You can usually find these bundled with the bluepill or at the same store you bought your bluepill.
- ## Assemble
- Follow the guide on component orientation and assembly.
- https://github.com/erichelgeson/BlueSCSI/blob/main/docs/assembly.md
- ## 3D Case
- Print or order a 3D case for your BlueSCSI to mount it inside your computer.
- https://github.com/erichelgeson/BlueSCSI/tree/main/3D-Files
- ## Flash
- You will need to flash the BlueSCSI program onto your BluePill following these instructions.
- https://github.com/erichelgeson/BlueSCSI#flashing
- ## Usage
- Be sure to follow the usage instructions for getting your drive images set up:
- https://github.com/erichelgeson/BlueSCSI#usage
|
