| 1234567891011121314151617181920212223242526 |
- # Troubleshooting 1.0-b
- :toc: macro
- NOTE: If your BlueSCSI was shipped after April 3rd, 2021 please refer to the 1.0-c troubleshooting guide.
- ## Green LED Flashes on and off
- This indicates BlueSCSI could not find any files on the SD card or communicate with the SD card.
- Ensure your files are named properly (case sensitive) following the naming convetion in the readme.
- If you recived a kit - verify all connections and that the outside of the SD holder is grounded.
- ## LOG.txt is empty
- This indicates the BlueSCSI could communicate with the SD Card but found no files. Check your naming convention.
- ## Slow performance
- Ensure you are using a good SD card. SD card quality can vary widely.
- Format your card as ExFat - users have seen quite a jump in performance.
- ## (Kit Only) Verify you are not using a fake
- https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]
|
