Eric Helgeson
89f21ba016
This is an unessisarry warning for us and files could under nomral situations fall into this scenario.
|
2 years ago | |
|---|---|---|
| .github | 2 years ago | |
| .vscode | 3 years ago | |
| 3D-Files | 3 years ago | |
| boards | 3 years ago | |
| cc-nc-hardware | 2 years ago | |
| docs | 3 years ago | |
| include | 4 years ago | |
| lib | 2 years ago | |
| src | 2 years ago | |
| test | 3 years ago | |
| utils | 2 years ago | |
| .gitignore | 3 years ago | |
| CONTRIBUTORS.txt | 3 years ago | |
| LICENSE | 3 years ago | |
| README.adoc | 3 years ago | |
| bluescsi.ini | 2 years ago | |
| platformio.ini | 2 years ago |
README.adoc
# BlueSCSI
:toc: macro
BlueSCSI is hardware that reproduces SCSI devices (hard disks, optical, etc) with an Pico 2040 dev board.
image::docs/buynow.png[link=https://scsi.blue, 150]
image::docs/discordbanner.png[link=https://discord.gg/GKcvtgU7P9, 150]
Join us in #bluescsi on https://discord.gg/GKcvtgU7P9[Discord] or open an issue on this repo.
toc::[]
## Compatibility
If your computer is not listed below - it may be compatible but there is no guarantee it will work. This device is designed and tested to work with pre-PowerPC Macs.
### Compatible
https://github.com/erichelgeson/BlueSCSI/wiki/Supported-Systems[Supported-Systems]
## Performance
https://github.com/erichelgeson/BlueSCSI/wiki/Performance[Performance]
## Usage
https://github.com/erichelgeson/BlueSCSI/wiki/Usage[Usage]
### Termination
To enable termination place the a jumper on the TERM block. Termination should be enabled if it is the last device in the SCSI chain, otherwise remove the jumpers if it is not.
## Troubleshooting
https://github.com/erichelgeson/BlueSCSI/wiki/Troubleshooting
## Hardware Versions
### 2.0 (Latest)
## Notes
### Making Gerbers for JLCPCB
https://support.jlcpcb.com/article/44-how-to-export-kicad-pcb-to-gerber-files
BlueSCSI(TM) - Eric Helgeson - All rights reserved.
:toc: macro
BlueSCSI is hardware that reproduces SCSI devices (hard disks, optical, etc) with an Pico 2040 dev board.
image::docs/buynow.png[link=https://scsi.blue, 150]
image::docs/discordbanner.png[link=https://discord.gg/GKcvtgU7P9, 150]
Join us in #bluescsi on https://discord.gg/GKcvtgU7P9[Discord] or open an issue on this repo.
toc::[]
## Compatibility
If your computer is not listed below - it may be compatible but there is no guarantee it will work. This device is designed and tested to work with pre-PowerPC Macs.
### Compatible
https://github.com/erichelgeson/BlueSCSI/wiki/Supported-Systems[Supported-Systems]
## Performance
https://github.com/erichelgeson/BlueSCSI/wiki/Performance[Performance]
## Usage
https://github.com/erichelgeson/BlueSCSI/wiki/Usage[Usage]
### Termination
To enable termination place the a jumper on the TERM block. Termination should be enabled if it is the last device in the SCSI chain, otherwise remove the jumpers if it is not.
## Troubleshooting
https://github.com/erichelgeson/BlueSCSI/wiki/Troubleshooting
## Hardware Versions
### 2.0 (Latest)
## Notes
### Making Gerbers for JLCPCB
https://support.jlcpcb.com/article/44-how-to-export-kicad-pcb-to-gerber-files
BlueSCSI(TM) - Eric Helgeson - All rights reserved.