| 12345678910111213141516171819202122232425262728293031323334353637 |
- #!/bin/bash
- # ZuluSCSI™ - Copyright (c) 2022-2025 Rabbit Hole Computing™
- #
- # ZuluSCSI™ file is licensed under the GPL version 3 or any later version.
- #
- # https://www.gnu.org/licenses/gpl-3.0.html
- # ----
- # This program is free software: you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation, either version 3 of the License, or
- # (at your option) any later version.
- #
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- # GNU General Public License for more details.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program. If not, see <https://www.gnu.org/licenses/>.
- # This script runs GDB with openocd and stlink to
- # allow debugging and seeing the SWO log output in realtime.
- killall orbuculum
- killall orbcat
- rm -f swo.log
- arm-none-eabi-gdb \
- -iex 'target extended | openocd -f interface/stlink.cfg -f target/stm32f1x.cfg -c "gdb_port pipe"' \
- -iex 'mon reset_config srst_only' \
- -iex 'mon halt' \
- -iex 'mon tpiu config internal swo.log uart false 38400000 2000000' \
- -iex 'shell bash -m -c "orbuculum -f swo.log &"' \
- -iex 'shell bash -m -c "orbcat -c 0,%c &"' \
- .pio/build/ZuluSCSIv1_1/firmware.elf
|
