BlueSCSI-v2/lib/SCSI2SD/software/SCSI2SD/USB_Bootloader.cydsn/codegentemp/CyBootAsmGnu.s

/*******************************************************************************
* File Name: CyBootAsmGnu.s
* Version 4.0
*
*  Description:
*   Assembly routines for GNU as.
*
********************************************************************************
* Copyright 2010-2013, Cypress Semiconductor Corporation.  All rights reserved.
* You may use this file only in accordance with the license, terms, conditions,
* disclaimers, and limitations in the end user license agreement accompanying
* the software package with which this file was provided.
*******************************************************************************/

.include "cyfittergnu.inc"

.syntax unified
.text
.thumb


/*******************************************************************************
* Function Name: CyDelayCycles
********************************************************************************
*
* Summary:
*  Delays for the specified number of cycles.
*
* Parameters:
*  uint32 cycles: number of cycles to delay.
*
* Return:
*  None
*
*******************************************************************************/
/* void CyDelayCycles(uint32 cycles) */
.align 3                    /* Align to 8 byte boundary (2^n) */
.global CyDelayCycles
.func CyDelayCycles, CyDelayCycles
.type CyDelayCycles, %function
.thumb_func
CyDelayCycles:              /* cycles bytes */
/* If ICache is enabled */
.ifeq CYDEV_INSTRUCT_CACHE_ENABLED - 1

    ADDS r0, r0, #2           /*  1    2   Round to nearest multiple of 4 */
    LSRS r0, r0, #2           /*  1    2   Divide by 4 and set flags */
    BEQ CyDelayCycles_done    /*  2    2   Skip if 0 */
    NOP                       /*  1    2   Loop alignment padding */

CyDelayCycles_loop:
    SUBS r0, r0, #1           /*  1    2 */
    MOV r0, r0                /*  1    2   Pad loop to power of two cycles */
    BNE CyDelayCycles_loop    /*  2    2 */

CyDelayCycles_done:
    BX lr                     /*  3    2 */

.else

    CMP r0, #20               /*  1    2   If delay is short - jump to cycle */
    BLS CyDelayCycles_short   /*  1    2  */
    PUSH {r1}                 /*  2    2   PUSH r1 to stack */
    MOVS r1, #1               /*  1    2  */

    SUBS r0, r0, #20          /*  1    2   Subtract overhead */
    LDR r1,=CYREG_CACHE_CC_CTL/*  2    2   Load flash wait cycles value */
    LDRB r1, [r1, #0]         /*  2    2  */
    ANDS r1, #0xC0            /*  1    2  */

    LSRS r1, r1, #6           /*  1    2  */
    PUSH {r2}                 /*  1    2   PUSH r2 to stack */
    LDR r2, =cy_flash_cycles  /*  2    2  */
    LDRB r1, [r2, r1]         /*  2    2  */

    POP {r2}                  /*  2    2   POP r2 from stack */
    NOP                       /*  1    2   Alignment padding */
    NOP                       /*  1    2   Alignment padding */
    NOP                       /*  1    2   Alignment padding */

CyDelayCycles_loop:
    SBCS r0, r0, r1           /*  1    2  */
    BPL CyDelayCycles_loop    /*  3    2  */
    NOP                       /*  1    2   Loop alignment padding */
    NOP                       /*  1    2   Loop alignment padding */

    POP {r1}                  /*  2    2   POP r1 from stack */
CyDelayCycles_done:
    BX lr                     /*  3    2  */
    NOP                       /*  1    2   Alignment padding */
    NOP                       /*  1    2   Alignment padding */

CyDelayCycles_short:
    SBCS r0, r0, #4           /*  1    2  */
    BPL CyDelayCycles_short   /*  3    2  */
    BX lr                     /*  3    2  */

cy_flash_cycles:
.byte 0x0B
.byte 0x05
.byte 0x07
.byte 0x09
.endif

.endfunc


/*******************************************************************************
* Function Name: CyEnterCriticalSection
********************************************************************************
*
* Summary:
*  CyEnterCriticalSection disables interrupts and returns a value indicating
*  whether interrupts were previously enabled (the actual value depends on
*  whether the device is PSoC 3 or PSoC 5).
*
*  Note Implementation of CyEnterCriticalSection manipulates the IRQ enable bit
*  with interrupts still enabled. The test and set of the interrupt bits is not
*  atomic; this is true for both PSoC 3 and PSoC 5. Therefore, to avoid
*  corrupting processor state, it must be the policy that all interrupt routines
*  restore the interrupt enable bits as they were found on entry.
*
* Parameters:
*  None
*
* Return:
*  uint8
*   Returns 0 if interrupts were previously enabled or 1 if interrupts
*   were previously disabled.
*
*******************************************************************************/
/* uint8 CyEnterCriticalSection(void) */
.global CyEnterCriticalSection
.func CyEnterCriticalSection, CyEnterCriticalSection
.type CyEnterCriticalSection, %function
.thumb_func
CyEnterCriticalSection:
    MRS r0, PRIMASK         /* Save and return interrupt state */
    CPSID I                 /* Disable interrupts */
    BX lr
.endfunc


/*******************************************************************************
* Function Name: CyExitCriticalSection
********************************************************************************
*
* Summary:
*  CyExitCriticalSection re-enables interrupts if they were enabled before
*  CyEnterCriticalSection was called. The argument should be the value returned
*  from CyEnterCriticalSection.
*
* Parameters:
*  uint8 savedIntrStatus:
*   Saved interrupt status returned by the CyEnterCriticalSection function.
*
* Return:
*  None
*
*******************************************************************************/
/* void CyExitCriticalSection(uint8 savedIntrStatus) */
.global CyExitCriticalSection
.func CyExitCriticalSection, CyExitCriticalSection
.type CyExitCriticalSection, %function
.thumb_func
CyExitCriticalSection:
    MSR PRIMASK, r0         /* Restore interrupt state */
    BX lr
.endfunc

.end


/* [] END OF FILE */