| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576 |
- 20190502 6.2.4
- - Port XEBEC support from v5 firmware
- - Add Flexible Disk Drive Geometry SCSI MODE page
- - Stability improvements
- - Fix regression from 6.1.3 firmware for Kurzweil K2000
- 20181011 6.2.1
- - Fix bug in USB disk interface with disks over 4GB
- 20180926 6.2.0
- - Fix bug with non-512 byte sectors.
- - Fix bug when writing with multiple SCSI devices on the chain
- - Performance improvements to write speeds.
- 20180430 6.1.4
- - Fix bug in self-test function
- 20180131 6.1.3
- - Fix bug that caused stability issues with 10MB/s transfers.
- 20171128 6.1.2
- - Fix synchronous negotiation bugs
- 20170520 6.1.1
- - Performance improvements to improve throughput at all scsi speeds
- - Add new "turbo" speed option to boost speeds.
- - May not be reliable, and use is not supported.
- - Async timings trimmed
- - Sync speeds boosted to theoretical 15.625MB/s, with 12.0MB/s measured
- read througput.
- - SD card put in "high speed" mode.
- - USB for configuration/firmware updates is disabled in turbo mode when
- processing SCSI commands. A power cycle may be required to connect
- via USB to reset the 48MHz clock back to 48MHz.
- - Fix scsi2sd-util6 size and sector-size inputs
- - Fix crash when configured scsi disk starting sector is less than
- SD card size
- 20170329 6.1.0
- - Enable synchronous transfers on SCSI1 hosts
- - Support 4MB/s sync transfers for Amiga A590 (WD33C93)
- - Merge v4.7 release changes, excluding custom mode/inquiry pages
- - various bug fixes
- 20161006 6.0.13
- - Fixed SCSI timing issue
- - Added glitch filter on SCSI signals.
- - Re-implemented SCSI parity checking.
- 20160912 6.0.10
- - Fixed write issue with UHS-I Speed Class 3 SD cards.
- - More stability bug fixes
- 20160827 6.0.8
- - Fixed "protocol error" issues when saving configuration to SD cards.
- - Synchronous transfers supported ! 5MB/s and 10MB/s supported.
- - Fix for accessing data via USB with more than 2 devices configured.
- 20160815 6.0.6
- - Fix performance bugs
- 20160814 6.05
- - More SCSI bug fixes (some timing issues resolved in the FPGA image)
- - Firmware update support using scsi2sd-util6.
- 20160716 6.03 (BETA3)
- - SCSI bug fixes.
- 20160616 6.01
- - Improved SD card compatibility
- - Fixed SCSI interfaces on slower SCSI controllers
- - Significant performance improvements
- - Added SD card hotswap support.
- 20160528 6.0
- - First BETA firmware for the 6.0 hardware version of the SCSI2SD.
|
