Add kicad files and pcb pic

board/DuPal_DIP/DuPal_DIP.kicad_pcb

@@ -87,7 +87,7 @@
       (mirror false)
       (drillshape 0)
       (scaleselection 1)
-      (outputdirectory "gerbers/rev_1.1/"))
+      (outputdirectory "gerbers/rev_2.0/"))
   )
 
   (net 0 "")
@@ -4657,7 +4657,7 @@
   (segment (start 134.62 125.73) (end 134.62 124.6047) (width 0.25) (layer B.Cu) (net 81))
   (segment (start 151.13 96.52) (end 151.13 95.4747) (width 0.25) (layer F.Cu) (net 81))
 
-  (zone (net 0) (net_name "") (layer F.Mask) (tstamp 0) (hatch edge 0.508)
+  (zone (net 0) (net_name "") (layer F.Mask) (tstamp 5F3A947F) (hatch edge 0.508)
     (connect_pads (clearance 0.508))
     (min_thickness 0.254)
     (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
@@ -4672,7 +4672,7 @@
       )
     )
   )
-  (zone (net 2) (net_name GND) (layer B.Cu) (tstamp 0) (hatch edge 0.508)
+  (zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5F3A947C) (hatch edge 0.508)
     (connect_pads (clearance 0.508))
     (min_thickness 0.254)
     (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
@@ -5620,7 +5620,7 @@
       )
     )
   )
-  (zone (net 2) (net_name GND) (layer F.Cu) (tstamp 0) (hatch edge 0.508)
+  (zone (net 2) (net_name GND) (layer F.Cu) (tstamp 5F3A9479) (hatch edge 0.508)
     (connect_pads (clearance 0.508))
     (min_thickness 0.254)
     (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))