|
|
@@ -164,7 +164,7 @@ If the heap drops below 18 KBytes some functions may not behave as expected (in
|
|
|
|
|
|
## Editing the configNode.h file
|
|
|
|
|
|
-The configNode.h file is used to set the WiFi access point and the structure of known
|
|
|
+The configNode.h file is used to set teh WiFi access point and the structure of known
|
|
|
sensors to the 1-channel gateway.
|
|
|
Setting the known WiFi access points (SSID and password) must be done at compile time.
|
|
|
|
|
|
@@ -203,15 +203,13 @@ Also the gateway may or may not support Class B, which is a superset of class A.
|
|
|
|
|
|
### Selecting you standard pin-out
|
|
|
|
|
|
-We support five pin-out configurations out-of-the-box, see below.
|
|
|
-If you use one of these, just set the parameter to the right value.
|
|
|
-If your pin definitions are different, update the loraModem.h and oLED.h file to reflect these settings.
|
|
|
+We support two pin-out configurations out-of-the-box: HALLARD and COMPRESULT.
|
|
|
+If you use one of these two, just set the parameter to the right value.
|
|
|
+If your pin definitions are different, update the loraModem.h file to reflect these settings.
|
|
|
1: HALLARD
|
|
|
2: COMRESULT pin out
|
|
|
- 3: ESP32/Wemos based board
|
|
|
- 4: ESP32/TTGO based board
|
|
|
- 5: ESP32/Heltec Wifi LoRA 32(V2)
|
|
|
-
|
|
|
+ 3: ESP32 pin out
|
|
|
+ 4: Other, define your own in loraModem.h
|
|
|
|
|
|
\#define _PIN_OUT 1
|
|
|
|
platenspeler