ESP-1ch-Gateway/ESP-sc-gway/configNode.h

// sensor.h; 1-channel LoRa Gateway for ESP8266
// Copyright (c) 2016, 2017, 2018, 2019 Maarten Westenberg version for ESP8266
//
// based on work done by Thomas Telkamp for Raspberry PI 1ch gateway
// and many other contributors.
//
// All rights reserved. This program and the accompanying materials
// are made available under the terms of the MIT License
// which accompanies this distribution, and is available at
// https://opensource.org/licenses/mit-license.php
//
// NO WARRANTY OF ANY KIND IS PROVIDED
//
// Author: Maarten Westenberg (mw12554@hotmail.com)
//
// This file contains a number of compile-time settings and declarations that are'
// specific to the LoRa rfm95, sx1276, sx1272 radio of the gateway.
//
//
// ------------------------------------------------------------------------------------

// It is possible to use the gateway as a normal sensor node also. In this case,
// substitute the node info below.
#if GATEWAYNODE==1

// Valid coding for internal sensors are LCODE and RAW.
// Make sure to only select one.
//#define _LCODE 1
#define _RAW 1
#define _CHECK_MIC 1
#define _SENSOR_INTERVAL 300

#define _DEVADDR { 0xAA, 0xAA, 0xAA, 0xAA }
#define _APPSKEY { 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB }
#define _NWKSKEY { 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC }
#define _SENSOR_INTERVAL 300
// For ESP32 based T_BEAM/TTGO boards these two are normally included
// If included make value 1, else if not, make them 0
#define _GPS 1
#define _BATTERY 1

#endif

// Wifi definitions
// WPA is an array with SSID and password records. Set WPA size to number of entries in array
// When using the WiFiManager, we will overwrite the first entry with the 
// accesspoint we last connected to with WifiManager
// NOTE: Structure needs at least one (empty) entry.
//		So WPASIZE must be >= 1
struct wpas {
	char login[32];							// Maximum Buffer Size (and allocated memory)
	char passw[64];
};


// Please fill in at least ONE SSID and password from your own WiFI network
// below. This is needed to get the gateway working
// Note: DO NOT use the first and the last line of the stucture, these should be empty strings and
//	the first line in te struct is reserved for WifiManager.
//
wpas wpa[] = {
	{ "" , "" },							// Reserved for WiFi Manager
	{ "yourSSID", "yourPassword" },
	{ "Your2SSID", "your2Password" }
};

#if _TRUSTED_NODES >= 1
struct nodex {
	uint32_t id;				// This is the LoRa ID (coded in 4 bytes uint32_t
	char nm[32];				// Name of the node
};

// Add all your named and trusted nodes to this list
nodex nodes[] = {
	{ 0x260116BD , "lora-34 PIR node" },						// F=0
	{ 0x26011152 , "lora-35 temp+humi node" },					// F=0
	{ 0x2601148C , "lora-36 test node"  },						// F=0
	{ 0x00000000 , "lora-00 well known sensor" }				// F=0
};

#endif //_TRUSTED_NODES


// In some cases we like to decode the lora message at the single channel gateway.
// In thisase, we need the NkwSKey and the AppsSKey of the node so that we can decode
// its messages.
// Although this is probably overkill in normal gateway situations, it greatly helps
// in debugging the node messages before they reach the TTN severs.
//
#if _LOCALSERVER==1
struct codex  {
	uint32_t id;				// This is the device ID (coded in 4 bytes uint32_t
	char nm[32];				// A name string which is free to choose
	uint8_t nwkKey[16];			// The Network Session Key of 16 bytes
	uint8_t appKey[16];			// The Application Session Key of 16 bytes
};

// Sometimes we want to decode the sensor completely as we do in the TTN server
// This means that for all nodes we want to view the data of, we need to provide
// the AppsSKey and the NwkSKey

// Definition of all nodes that we want to decode locally on the gateway.
//
codex decodes[] = {
	{ 0xAAAAAAAA , "lora-EE", 	// F=0
		{ 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB },
		{ 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC } 
	},
	{ 0xBBBBBBBB , "lora-FF", 	// F=0
		{ 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB },
		{ 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC } 
	},
	{ 0x00000000 , "lora-00",	// F=0
		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
	}					
};
#endif //_LOCALSERVER

// If you have a second back-end server defined such as Semtech or loriot.io
// your can define _THINGPORT and _THINGSERVER with your own value.
// If not, make sure that you do not define these, which will save CPU time
// Port is UDP port in this program
//
// Default for testing: Switched off
// #define _THINGSERVER "your.extra.server"		// Server URL of the LoRa-udp.js handler
// #define _THINGPORT 1700						// Port 1700 is old compatibility


// For asserting and testing the following defines are used.
//
#if !defined(CFG_noassert)
#define ASSERT(cond) if(!(cond)) gway_failed(__FILE__, __LINE__)
#else
#define ASSERT(cond) /**/
#endif