 Keir Fraser
|
c2441a7ae3
CMD_GET_PIN: Accept all pins accepted by CMD_SET_PIN.
|
3 年之前 |
|
Keir Fraser
|
08916f8129
STM32F1, AT32F4: Dynamic USB buffer sizing.
|
3 年之前 |
|
Keir Fraser
|
7fca1c9315
Implement 64:32->32 division and use it to avoid arithmetic overflow in time_from_samples()
|
3 年之前 |
|
Keir Fraser
|
5b79e9e79b
F1 Plus: Support testmode
|
3 年之前 |
|
Keir Fraser
|
4b82ef4741
gw bandwidth: Check integrity of USB comms during bandwidth test.
|
3 年之前 |
|
Keir Fraser
|
c894f9f02b
New firmware command CMD_NOCLICK_STEP. Used by WinUAE floppy bridge.
|
3 年之前 |
|
Keir Fraser
|
9846c544f6
testmode: Add a WDAT oscillation test
|
3 年之前 |
|
Keir Fraser
|
4b82a229b1
AT32F4: Support both AT32F403 and AT32F415
|
3 年之前 |
|
Keir Fraser
|
e1f280bae0
F1 Plus: Implement jumperless firmware update
|
4 年之前 |
|
Keir Fraser
|
c6e86add16
F1: Introduce new submodel "F1 Plus"
|
4 年之前 |
|
Keir Fraser
|
d5c0650df4
Implement a test mode for F7 (v3, Lightning Plus) and AT32F4xx models.
|
4 年之前 |
|
Keir Fraser
|
001cf97ca8
AT32Fxx: Implement firmware update
|
4 年之前 |
|
Keir Fraser
|
a2e93a12ed
floppy: AT32F4xx can read NDTR=0 in DMA circular mode.
|
4 年之前 |
|
Keir Fraser
|
cfa91ce5f1
Initial port of Greaseweazle to AT32F415.
|
4 年之前 |
|
Keir Fraser
|
2809d34c28
Rearrange MCU namespace so that STM32 is one subtype.
|
4 年之前 |
|
Keir Fraser
|
fb93abea9e
New firmware command CMD_GET_PIN to read an interface pin's voltage level.
|
4 年之前 |
|
Keir Fraser
|
5fb95d143a
floppy: New default step rate 10ms. Should work with more drive types.
|
4 年之前 |
|
Keir Fraser
|
5279e46e34
floppy: Add required settle periods during trk0 calibration.
|
4 年之前 |
|
Keir Fraser
|
7d32ec501b
flippy: Seek to true cylinder 0, and only disable trk0 sensor when really necessary.
|
4 年之前 |
|
Keir Fraser
|
de9c26d23f
Rename auto_off -> watchdog
|
4 年之前 |
|
Keir Fraser
|
43a0076d54
firmware: Reset USB connection and Act LED on watchdog timeout.
|
4 年之前 |
|
Keir Fraser
|
44c8f7ef9a
Rename do_auto_off() to quiesce_drives().
|
4 年之前 |
|
Keir Fraser
|
4768b831d4
floppy: Bus reset / auto-off fixes
|
4 年之前 |
|
Keir Fraser
|
2b78b953b7
ReadFlux: Allow max_index_post_ticks to be specified by the host.
|
4 年之前 |
|
Keir Fraser
|
dd4864c216
floppy: On read flux, after reading all requested index pulses, add a 500us tail to the read operation.
|
4 年之前 |
|
Keir Fraser
|
fa0ab25d5f
On firmware updates, only read the exact required length from the USB endpoint.
|
4 年之前 |
|
Keir Fraser
|
efa8ddbd31
On bootloader update, validate the new *before* erasing the old.
|
4 年之前 |
|
Keir Fraser
|
b28157d4c5
Rename side -> head all the way down into firmware.
|
4 年之前 |
|
Keir Fraser
|
b69b4cdef1
Read and Write Flux commands are extended.
|
4 年之前 |
|
Keir Fraser
|
b71571182a
floppy: Increase /STEP pulse width to 15us.
|
4 年之前 |
