| .. |
|
mcu
|
f2a0ed4094
STM32F7, AT32F4: Replace open-coded references to PB13 with {gpio_led, pin_led}
|
преди 2 години |
|
usb
|
71dc5838bf
usb: Handle GET_REQUEST (Device) as required by USB specification.
|
преди 2 години |
|
Makefile
|
a7cfcf0482
blinky: Fix serial baud rate. Should be 115200.
|
преди 3 години |
|
blinky.c
|
6f45c298ad
blinky: LED permanently illuminated for a working Low-Density device.
|
преди 4 години |
|
board.c
|
4697163304
V4: Duplicate Act LED on TX pin when not in debug mode.
|
преди 3 години |
|
build_info.c
|
ac588f09e0
Firmware Update Bootloader
|
преди 6 години |
|
console.c
|
651bffae95
console: All chips run USART1 on APB2 at APB2 speed.
|
преди 3 години |
|
cortex.c
|
2dd299393e
f7: Extract board ID from pins PC15:13. Currently all three must float.
|
преди 5 години |
|
crc.c
|
d42670b3f4
Initial read/write support for SCP image files.
|
преди 6 години |
|
floppy.c
|
04343e64e3
GET_INFO: New subtypes GET_DRIVE and GET_CURRENT_DRIVE
|
преди 3 години |
|
fw_update.c
|
08916f8129
STM32F1, AT32F4: Dynamic USB buffer sizing.
|
преди 4 години |
|
main.c
|
1159fba8ab
STM32F7: Fix board_init() to pull up unused pins.
|
преди 6 години |
|
string.c
|
d42670b3f4
Initial read/write support for SCP image files.
|
преди 6 години |
|
target.ld.S
|
1f6d6c7dcf
Modify build system to place artefacts in separate out/ folder
|
преди 3 години |
|
testmode.c
|
5b79e9e79b
F1 Plus: Support testmode
|
преди 4 години |
|
time.c
|
ee02a86e80
time: Proactive pull from FlashFloppy for 32-bit timebase update period
|
преди 2 години |
|
timer.c
|
ca7447ceac
timer: Proactive pull from FlashFloppy for coarse-deadline handling
|
преди 2 години |
|
util.c
|
7fca1c9315
Implement 64:32->32 division and use it to avoid arithmetic overflow in time_from_samples()
|
преди 4 години |
|
vectors.S
|
d42670b3f4
Initial read/write support for SCP image files.
|
преди 6 години |
Keir Fraser
f2a0ed4094
STM32F7, AT32F4: Replace open-coded references to PB13 with {gpio_led, pin_led}