#ifndef DCLOAD_CONFIG_H
#define DCLOAD_CONFIG_H

#define DC_LOAD_VER             "36"

#define I2C_EPROM_ADDRESS       0x57
#define I2C_MCP4725_ADDRESS     0x61            //the DAC I2C address with MCP4725 pin A0 set high
#define I2C_MCP79410_ADDRESS    0x6f            //0x6f is the default address for the MCP79410 Real Time Clock IC
#define I2C_MCP342x_ADDRESS     0x68            //0x68 is the default address for the MCP3426 device
#define rxPin 8
#define txPin 7
#define COL_RED                 63488
#define COL_GREEN               1024
#define COL_GRAY                50712
#define COL_BLUE                1055
#define line_len                21
#define MODE_CC                 1
#define MODE_CP                 2
#define MODE_CR                 3
#define MODE_TC                 4
#define MODE_TP                 5
#define MODE_TT                 6
#define MODE_TL                 7
#define MODE_BC                 8
#define CURRENTCUTOFF_ADDRESS   0x00
#define POWERCUTOFF_ADDRESS     0x20
#define TEMPCUTOFF_ADDRESS      0x40

#define pinA                    2                   //digital pin (also interrupt pin) for the A pin of the Rotary Encoder (changed to digital pin 2)
#define pinB                    4                   //digital pin for the B pin of the Rotary Encoder

#define CURSORPOS_PIN           17                  //analog pin A3 used as a digital pin to set cursor position (rotary encoder push button)
#define LOADONOFF_PIN           15                  //analog pin A1 used as a digital pin to set Load ON/OFF
#define TRIGGERPULSE_PIN        16                  //analog pin A2 used as a digital pin for trigger pulse input in transient mode
#define FAN_PIN                 3                   //digital pin 3 for fan control output (changed to Digital pin 3)
#define TEMP_PIN                A6                  //analog pin used for temperature output from LM35 (was A0 previously but changed)
#define setCurrentCalibrationFactor     0.980       //calibration adjustment - set as required if needed (was 1.000)
#define displayCurrentCal               0.000       //calibration correction for LCD current display (was 0.040)
#define ResistorCutOff                  999         //maximum Resistor we want to deal with in software

#define MCP4725_I2CADDR_DEFAULT (0x62)              //< Default i2c address
#define MCP4725_CMD_WRITEDAC (0x40)                 //< Writes data to the DAC
#define MCP4725_CMD_WRITEDACEEPROM    (0x60)        //< Writes data to the DAC and the EEPROM (persisting the assigned

#define PIC_USB_GRAY            2
#define PIC_USB_BLACK           3

#define LiPoCutOffVoltage        3.0                //set cutoff voltage for LiPo battery
#define LiFeCutOffVoltage        2.8                //set cutoff voltage for LiFe battery
#define NiCdCutOffVoltage        1.0                //set cutoff voltage for NiCd battery
#define ZiZnCutOffVoltage        1.0                //set cutoff voltage for ZiZn battery
#define PbAcCutOffVoltage        1.75               //set cutoff voltage for PbAc battery

#define DEBOUNCE_DELAY           50
#endif // DCLOAD_CONFIG_H