Strona główna Odkrywaj Pomoc
Zarejestruj się Zaloguj się
sweproj.com
/
SdFat
2
0
Forkuj 0
Pliki Problemy 0 Oczekujące zmiany 0 Wiki
Gałąź: master
Gałęzie Tagi
SdFat
/
doc
/
SdErrorCodes.txt

SdErrorCodes.txt 2.4 KB
Bezpośredni odnośnik Historia Czysty

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051 
  1. 2022-07-01
    2. 

  2. 

  3. Run the SdErrorCode example to produce an updated list.
    4. 

  4. 

  5. Code,Symbol - failed operation
    6. 

  6. 0X00,SD_CARD_ERROR_NONE - No error
    7. 

  7. 0X01,SD_CARD_ERROR_CMD0 - Card reset failed
    8. 

  8. 0X02,SD_CARD_ERROR_CMD2 - SDIO read CID
    9. 

  9. 0X03,SD_CARD_ERROR_CMD3 - SDIO publish RCA
    10. 

  10. 0X04,SD_CARD_ERROR_CMD6 - Switch card function
    11. 

  11. 0X05,SD_CARD_ERROR_CMD7 - SDIO card select
    12. 

  12. 0X06,SD_CARD_ERROR_CMD8 - Send and check interface settings
    13. 

  13. 0X07,SD_CARD_ERROR_CMD9 - Read CSD data
    14. 

  14. 0X08,SD_CARD_ERROR_CMD10 - Read CID data
    15. 

  15. 0X09,SD_CARD_ERROR_CMD12 - Stop multiple block read
    16. 

  16. 0X0A,SD_CARD_ERROR_CMD13 - Read card status
    17. 

  17. 0X0B,SD_CARD_ERROR_CMD17 - Read single block
    18. 

  18. 0X0C,SD_CARD_ERROR_CMD18 - Read multiple blocks
    19. 

  19. 0X0D,SD_CARD_ERROR_CMD24 - Write single block
    20. 

  20. 0X0E,SD_CARD_ERROR_CMD25 - Write multiple blocks
    21. 

  21. 0X0F,SD_CARD_ERROR_CMD32 - Set first erase block
    22. 

  22. 0X10,SD_CARD_ERROR_CMD33 - Set last erase block
    23. 

  23. 0X11,SD_CARD_ERROR_CMD38 - Erase selected blocks
    24. 

  24. 0X12,SD_CARD_ERROR_CMD58 - Read OCR register
    25. 

  25. 0X13,SD_CARD_ERROR_CMD59 - Set CRC mode
    26. 

  26. 0X14,SD_CARD_ERROR_ACMD6 - Set SDIO bus width
    27. 

  27. 0X15,SD_CARD_ERROR_ACMD13 - Read extended status
    28. 

  28. 0X16,SD_CARD_ERROR_ACMD23 - Set pre-erased count
    29. 

  29. 0X17,SD_CARD_ERROR_ACMD41 - Activate card initialization
    30. 

  30. 0X18,SD_CARD_ERROR_ACMD51 - Read SCR data
    31. 

  31. 0X19,SD_CARD_ERROR_READ_TOKEN - Bad read data token
    32. 

  32. 0X1A,SD_CARD_ERROR_READ_CRC - Read CRC error
    33. 

  33. 0X1B,SD_CARD_ERROR_READ_FIFO - SDIO fifo read timeout
    34. 

  34. 0X1C,SD_CARD_ERROR_READ_REG - Read CID or CSD failed.
    35. 

  35. 0X1D,SD_CARD_ERROR_READ_START - Bad readStart argument
    36. 

  36. 0X1E,SD_CARD_ERROR_READ_TIMEOUT - Read data timeout
    37. 

  37. 0X1F,SD_CARD_ERROR_STOP_TRAN - Multiple block stop failed
    38. 

  38. 0X20,SD_CARD_ERROR_TRANSFER_COMPLETE - SDIO transfer complete
    39. 

  39. 0X21,SD_CARD_ERROR_WRITE_DATA - Write data not accepted
    40. 

  40. 0X22,SD_CARD_ERROR_WRITE_FIFO - SDIO fifo write timeout
    41. 

  41. 0X23,SD_CARD_ERROR_WRITE_START - Bad writeStart argument
    42. 

  42. 0X24,SD_CARD_ERROR_WRITE_PROGRAMMING - Flash programming
    43. 

  43. 0X25,SD_CARD_ERROR_WRITE_TIMEOUT - Write timeout
    44. 

  44. 0X26,SD_CARD_ERROR_DMA - DMA transfer failed
    45. 

  45. 0X27,SD_CARD_ERROR_ERASE - Card did not accept erase commands
    46. 

  46. 0X28,SD_CARD_ERROR_ERASE_SINGLE_SECTOR - Card does not support erase
    47. 

  47. 0X29,SD_CARD_ERROR_ERASE_TIMEOUT - Erase command timeout
    48. 

  48. 0X2A,SD_CARD_ERROR_INIT_NOT_CALLED - Card has not been initialized
    49. 

  49. 0X2B,SD_CARD_ERROR_INVALID_CARD_CONFIG - Invalid card config
    50. 

  50. 0X2C,SD_CARD_ERROR_FUNCTION_NOT_SUPPORTED - Unsupported SDIO command
    51. 

  51. 0X2D,SD_CARD_ERROR_UNKNOWN - Unknown error
    52.