 Keir Fraser
|
e7062e3ad8
usb: Send periodic noflux opcodes during long periods of no flux.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
633a4eb9ee
usb: Make two-byte flux encoding slightly more efficient.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
9b4b69da85
usb: Place index timings in-band within the flux read stream.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
2fa90db2e1
floppy: Default head-step delay is 5ms
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
ff635cf5b7
floppy: Implement 50us mask after every /IDX falling edge, to prevent
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
05ceab52ee
Move model-specific files into subfolders.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
e87c5af441
Support new boards F7 Plus and Ultra730 in the firmware.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
08ae2cb6c8
gw info: Report HW Submodel and USB transfer speed
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
fd2a04188e
Allow Greaseweazle bootloader to be update (use with caution!)
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
296567a7cf
f7: Fix firmware update: The mode-switch flag must be flushed from DCache.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
12028bdffe
f7: Do not wait for write buffer to completely fill at Full Speed.
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
93c5200a65
f7: Define new 'ext_ram' section to allocate data to SRAM1/SRAM2
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
6b93496abf
floppy: Move u_buf size into a #define
|
%!s(int64=4) %!d(string=hai) anos |
|
Keir Fraser
|
98b49d27be
HS USB: Initial commit.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
4435650f0a
bandwidth: Calculate Min / Mean / Max bandwidth in each direction
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
73c3902dce
bandwidth: New bandwidth measurement command
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
8799fda304
Introduce erase_flux command to erase a track.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
773e9933dd
floppy: Remove delayed-index option from WRITE_FLUX command.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
0bf525c3a5
gw.py reset: Reset to Power-On Defaults
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
88b3af0076
gw.py pin: Allow a pin to be manually set to specified level.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
f58c0fb761
Add drive letter (0,1,2,A,B) to gw.py read/write commands.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
fec5d4c2df
Activity LED (C13 on Blue Pill, B13 on F7 board):
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
ecf18e86fb
STM32F7: Fix all time values to be in units of the sample clock, not the sysclk.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
77d6582fce
STM32F7: Some timer+dma fixes for the read path.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
1159fba8ab
STM32F7: Fix board_init() to pull up unused pins.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
1e578a767d
STM32F7: Update Bootloader
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
9a1702abd3
STM32F7: Floppy Control
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
0ac13f94de
floppy write: Handle a long flux interval (>150us) as a No Flux Area and
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
28d68841c2
floppy: Fix check for end-of-stream in ST_write_flux_wait_data state.
|
%!s(int64=5) %!d(string=hai) anos |
|
Keir Fraser
|
602eb76a0a
Fix compatibility with old bootloader versions
|
%!s(int64=5) %!d(string=hai) anos |
