| .. |
|
usb
|
5608fdd646
f7 usb: Issue new Rx (OUT) transfer when > 1/2 packet buffers are available.
|
%!s(int64=5) %!d(string=hai) anos |
|
Greaseweazle.ld.S
|
93c5200a65
f7: Define new 'ext_ram' section to allocate data to SRAM1/SRAM2
|
%!s(int64=5) %!d(string=hai) anos |
|
Makefile
|
fd2a04188e
Allow Greaseweazle bootloader to be update (use with caution!)
|
%!s(int64=5) %!d(string=hai) anos |
|
blinky.c
|
cde4bbb3f3
blinky: Clarify timer overflow-rate comments.
|
%!s(int64=5) %!d(string=hai) anos |
|
board.c
|
fec5d4c2df
Activity LED (C13 on Blue Pill, B13 on F7 board):
|
%!s(int64=5) %!d(string=hai) anos |
|
build_info.c
|
ac588f09e0
Firmware Update Bootloader
|
%!s(int64=6) %!d(string=hai) anos |
|
console.c
|
9a1702abd3
STM32F7: Floppy Control
|
%!s(int64=6) %!d(string=hai) anos |
|
cortex.c
|
2dd299393e
f7: Extract board ID from pins PC15:13. Currently all three must float.
|
%!s(int64=5) %!d(string=hai) anos |
|
crc.c
|
d42670b3f4
Initial read/write support for SCP image files.
|
%!s(int64=6) %!d(string=hai) anos |
|
floppy.c
|
fd2a04188e
Allow Greaseweazle bootloader to be update (use with caution!)
|
%!s(int64=5) %!d(string=hai) anos |
|
floppy_f1.c
|
93c5200a65
f7: Define new 'ext_ram' section to allocate data to SRAM1/SRAM2
|
%!s(int64=5) %!d(string=hai) anos |
|
floppy_f7.c
|
93c5200a65
f7: Define new 'ext_ram' section to allocate data to SRAM1/SRAM2
|
%!s(int64=5) %!d(string=hai) anos |
|
fpec_f1.c
|
1e578a767d
STM32F7: Update Bootloader
|
%!s(int64=6) %!d(string=hai) anos |
|
fpec_f7.c
|
1e578a767d
STM32F7: Update Bootloader
|
%!s(int64=6) %!d(string=hai) anos |
|
fw_update.c
|
296567a7cf
f7: Fix firmware update: The mode-switch flag must be flushed from DCache.
|
%!s(int64=5) %!d(string=hai) anos |
|
main.c
|
1159fba8ab
STM32F7: Fix board_init() to pull up unused pins.
|
%!s(int64=6) %!d(string=hai) anos |
|
stm32f1.c
|
2dd299393e
f7: Extract board ID from pins PC15:13. Currently all three must float.
|
%!s(int64=5) %!d(string=hai) anos |
|
stm32f7.c
|
d275982297
F7: Must enable over-drive mode to run reliably at 216MHz
|
%!s(int64=5) %!d(string=hai) anos |
|
string.c
|
d42670b3f4
Initial read/write support for SCP image files.
|
%!s(int64=6) %!d(string=hai) anos |
|
time.c
|
d42670b3f4
Initial read/write support for SCP image files.
|
%!s(int64=6) %!d(string=hai) anos |
|
timer.c
|
37e49e1f82
STM32F7: Set up system clocks, PLLs, divisors, etc.
|
%!s(int64=6) %!d(string=hai) anos |
|
util.c
|
8138aed409
usb: Use upper-case hex for serial string
|
%!s(int64=5) %!d(string=hai) anos |
|
vectors.S
|
d42670b3f4
Initial read/write support for SCP image files.
|
%!s(int64=6) %!d(string=hai) anos |
Keir Fraser
fd2a04188e
Allow Greaseweazle bootloader to be update (use with caution!)